Hi John, On Monday 19 March 2007 08:07, John Andrewartha wrote: > Hi, > A small problem that I need assistance with please. > I a now the proud owner of a 3G+ 850 MHz USB modem from CMOTECH it uses a > real usb hub. In AU it's called NextG wireless Internet, every where else > something else. > I was able to modify my old usbdevs and usb_quirks.c to make a modem card > from the same vendor work with FreeBSD 6.1. > I posted the diff for that mid last year. > > The following from usbdevs -v for the new device I can't get to attach. > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x0000), rev 1.00 > port 1 addr 2: full speed, power 500 mA, config 1, CMOTECH CDMA > Technologies(0x6280), CMOTECH CO., LTD.(0x16d8), rev 0.00 > port 2 powered > ---- > Device that does work > > addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), (0x11c1) > (0x0000), rev 1.00 > port 1 addr 2: full speed, power 100 mA, config 1, CMOTECH CDMA > Technologies(0x5523), CMOTECH CO., LTD.(0x16d8), rev 0.00 > port 2 powered > This card is just that a PCM card that reports as a usb device. > I cheated and changed usbdevs entry for CMOTECH from 0x5523 to 0x6280, > rebuilt the kernel, and, failed. > > Any suggestions and hints appreciated. >
If you load ugen, and run /usr/ports/sysutils/udesc_dump ? What do you get then ? --HPS _______________________________________________ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "[EMAIL PROTECTED]"