>Number: 112569 >Category: usb >Synopsis: USB mode may wrong when mounting psp >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-usb >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Thu May 10 11:50:03 GMT 2007 >Closed-Date: >Last-Modified: >Originator: Gu Xianjie >Release: 6.2-RELEASE-p4 >Organization: NetEase HZ CN >Environment: FreeBSD datastream.people.163.org 6.2-RELEASE-p4 FreeBSD 6.2-RELEASE-p4 #0: Thu Apr 26 17:40:53 UTC 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386 >Description: USB mode have some problems when I try to mount sony psp. It likes this: ~> sudo mount_msdosfs /dev/da0s1 /mnt/ mount_msdosfs: /dev/da0s1: Input/output error And dmesg: Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE-p4 #0: Thu Apr 26 17:40:53 UTC 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2793.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x441d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,<b14>> real memory = 1072103424 (1022 MB) avail memory = 1040134144 (991 MB) ACPI APIC Table: <DELL 170L > ioapic0: Changing APIC ID to 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <DELL 170L > on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82865G (865G GMCH) SVGA controller> port 0xed98-0xed9f mem 0xe8000000-0xefffffff,0xfeb80000-0xfebfffff irq 16 at device 2.0 on pci0 agp0: detected 892k stolen memory agp0: aperture size is 128M uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xff80-0xff9f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xff60-0xff7f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-D> port 0xff20-0xff3f irq 16 at device 29.3 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801EB (ICH5) USB controller USB-D> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xffa80800-0xffa80bff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: wrong number of companions (4 != 3) usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 8 ports with 8 removable, self powered pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib1 fxp0: <Intel 82801BA (D865) Pro/100 VE Ethernet> port 0xdf40-0xdf7f mem 0xfeaff000-0xfeafffff irq 20 at device 8.0 on pci1 miibus0: <MII bus> on fxp0 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:13:20:d9:77:d1 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf mem 0xfeb7fc00-0xfeb7ffff irq 18 at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 atapci1: <Intel ICH5 SATA150 controller> port 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfea0-0xfeaf irq 18 at device 31.2 on pci0 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pcm0: <Intel ICH5 (82801EB)> port 0xee00-0xeeff,0xedc0-0xedff mem 0xfeb7fa00-0xfeb7fbff,0xfeb7f900-0xfeb7f9ff irq 17 at device 31.5 on pci0 pcm0: primary codec not ready! pcm0: <Analog Devices AD1980 AC97 Codec> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xca7ff,0xca800-0xcbfff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: vendor 0x0461 USB Optical Mouse, rev 2.00/2.00, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 2793014154 Hz quality 800 Timecounters tick every 1.000 msec ad0: 38146MB <WDC WD400BB-75JHC0 06.01C06> at ata0-master UDMA100 acd0: CDROM <GCR-8485B/1.05> at ata1-master UDMA33 ukbd0: Dell Dell USB Keyboard, rev 1.10/3.01, addr 3, iclass 3/1 kbd2 at ukbd0 Trying to mount root from ufs:/dev/ad0s1a WARNING: / was not properly dismounted WARNING: /home was not properly dismounted WARNING: /usr was not properly dismounted WARNING: /var was not properly dismounted IP Filter: v4.1.13 initialized. Default = pass all, Logging = enabled drmsub0: <Intel i865G GMCH>: (child of agp_i810.c) on agp0 info: [drm] AGP at 0xe8000000 128MB info: [drm] Initialized i915 1.4.0 20060119 umass0: Sony PSP Type A, rev 2.00/1.00, addr 2 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Sony PSP 1.00> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: 3846MB (7876608 512 byte sectors: 255H 63S/T 490C) netsmb_dev: loaded umass0: BBB reset failed, IOERROR umass0: BBB bulk-in clear stall failed, IOERROR umass0: BBB bulk-out clear stall failed, IOERROR umass0: BBB reset failed, IOERROR umass0: BBB bulk-in clear stall failed, IOERROR umass0: BBB bulk-out clear stall failed, IOERROR umass0: BBB reset failed, IOERROR umass0: BBB bulk-in clear stall failed, IOERROR umass0: BBB bulk-out clear stall failed, IOERROR umass0: BBB reset failed, IOERROR umass0: BBB bulk-in clear stall failed, IOERROR umass0: BBB bulk-out clear stall failed, IOERROR umass0: BBB reset failed, IOERROR umass0: BBB bulk-in clear stall failed, IOERROR umass0: BBB bulk-out clear stall failed, IOERROR
>How-To-Repeat: Keep usb cable on same usb interface. Set psp on usb mode then mount the psp,umount it soon.when I try to mount psp again,where an error. >Fix: usb cable plus on other usb interface. >Release-Note: >Audit-Trail: >Unformatted: _______________________________________________ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "[EMAIL PROTECTED]"