On Friday 15 May 2009, Thierry Herbelot wrote: > Hello, > > This is a follow-on for : > http://www.mail-archive.com/freebsd-usb%40freebsd.org/msg04000.html, > where a code snippet was posted to use the new USB stack. > > I've just recompiled my old experiment (which used to work at the time), > and it does not seem to work with today's current (I made the cosmetic > changes due to the change of name for the libusb, so the compile at least > is OK). > > the issue is that the following loop (copied from the previous archived > post) is never executed : > -------------------- > while ( ( pdev = libusb20_be_device_foreach ( pbe, pdev ) ) ) > { > ddesc = libusb20_dev_get_device_desc ( pdev ); > printf("vendor %x prod %x\n", ddesc->idVendor, > ddesc->idProduct); > > /* stop with the first found device */ > if ( ddesc->idVendor == MY_VENDOR_ID ) > { > libusb20_be_dequeue_device ( pbe, pdev ); > break; > } > } > -------------------- > > pdev is always NULL at the end of the loop (even though a USB device has > been plugged, has been detected by the USB stack and is correctly seen, as > per usbconfig, with the expected idVendor). > > I have not followed the recent developments on the USB stack : maybe some > change is needed in my code ?
Check permissions for devices under /dev/usb --HPS _______________________________________________ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"