Hello,
for several days I ways trying to get devel/avrdude to work with an
USBasp compatibel device (www.ullihome.de) on FreeBSD 7.2 running as a
guest in VMware Workstation 6.5.2.
Because avrdude didn't recognize the device at all, I had a closer look
and found that nearly (I am not sure enough to say every) second control
transfer (using libusb's usb_control_msg) fails, if:
* it is a read request (has USB_ENDPOINT_IN set) and
* requests more than 20 bytes (ucr_request.wLength). If 20 or less
bytes are requested, most (not sure if all) transfers suceed.
To repeat run the attached program:
1. Fill in some vendor / product ID of a device detected as ugen device
2. Compile and run the code (devel/libusb must be installed).
The result will look like this:
r...@kirika2# ./test
Found AVR-USB device
USB_control_msg result: 28
1c 03
Found device from vendor: www.fischl.de
USB_control_msg result: -5
Warning: cannot query product: error sending control message:
Input/output error
I built and ran a kernel with USB_DEBUG enabled and set 'sysctl
hw.usb.ugen.debug=6'. The result is attached. Excerpt:
kernel: ugenioctl: cmd=c018556f
kernel: usbd_alloc_xfer() = 0xc36eb800
kernel: usbd_transfer: xfer=0xc36eb800, flags=6, pipe=0xc37a7480, running=0
kernel: usbd_dump_queue: pipe=0xc37a7480
kernel: usb_insert_transfer: pipe=0xc37a7480 running=0 timeout=5000
kernel: usb_add_task: task=0xc36eb990
kernel: usb_task_thread: woke up task=0xc36eb990
kernel: usb_transfer_complete: pipe=0xc37a7480 xfer=0xc36eb800
*status=15* actlen=0
The USB_DO_REQUEST (0xc018556f) ioctl to ugen times out. I can set
different timeout values (tried 1000, 5000, 10000), it times out everytime.
If the same request is send immediately a second time (for example by
putting the usb_control_msg call in a loop) it suceeds!
Some remarks:
* This only happens running FreeBSD 7.2 in VMware, it does work on
real hardware (see below)!
* Avrdude with libusb-win32 is running fine on WinXP as guest OS.
* It does happen on different hosts running VMware (all Windows
hosts anyway)
* It happens no matter what USB device I tried (used USBasp,
lcd2usb, Garmin GPS, USB smartcard reader)
* It is reproducable on my systems.
On real hardware, the program results in:
test# ./test
Found AVR-USB device
USB_control_msg result: 28
1c 03
Found device from vendor: www.fischl.de
USB_control_msg result: 14
0e 03
Found device: USBasp
So what could it be?
Regards,
Markus
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usbd_alloc_xfer() = 0xc36eb800
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usbd_transfer: xfer=0xc36eb800,
flags=6, pipe=0xc3187d00, running=0
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usbd_dump_queue: pipe=0xc3187d00
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usb_insert_transfer:
pipe=0xc3187d00 running=0 timeout=5000
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usb_transfer_complete:
pipe=0xc3187d00 xfer=0xc36eb800 status=0 actlen=2
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usb_transfer_complete: repeat=0 new
head=0
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usbd_start_next: pipe=0xc3187d00,
xfer=0
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usbd_free_xfer: 0xc36eb800
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usbd_alloc_xfer() = 0xc36eb800
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usbd_transfer: xfer=0xc36eb800,
flags=6, pipe=0xc3187d00, running=0
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usbd_dump_queue: pipe=0xc3187d00
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usb_insert_transfer:
pipe=0xc3187d00 running=0 timeout=5000
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usb_transfer_complete:
pipe=0xc3187d00 xfer=0xc36eb800 status=0 actlen=12
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usb_transfer_complete: repeat=0 new
head=0
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usbd_start_next: pipe=0xc3187d00,
xfer=0
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usbd_free_xfer: 0xc36eb800
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usbd_alloc_xfer() = 0xc36eb800
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usbd_transfer: xfer=0xc36eb800,
flags=6, pipe=0xc3187d00, running=0
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usbd_dump_queue: pipe=0xc3187d00
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usb_insert_transfer:
pipe=0xc3187d00 running=0 timeout=5000
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usb_transfer_complete:
pipe=0xc3187d00 xfer=0xc36eb800 status=0 actlen=2
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usb_transfer_complete: repeat=0 new
head=0
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usbd_start_next: pipe=0xc3187d00,
xfer=0
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usbd_free_xfer: 0xc36eb800
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usbd_alloc_xfer() = 0xc36eb800
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usbd_transfer: xfer=0xc36eb800,
flags=6, pipe=0xc3187d00, running=0
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usbd_dump_queue: pipe=0xc3187d00
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usb_insert_transfer:
pipe=0xc3187d00 running=0 timeout=5000
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usb_transfer_complete:
pipe=0xc3187d00 xfer=0xc36eb800 status=0 actlen=28
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usb_transfer_complete: repeat=0 new
head=0
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usbd_start_next: pipe=0xc3187d00,
xfer=0
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usbd_free_xfer: 0xc36eb800
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usbd_alloc_xfer() = 0xc36eb800
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usbd_transfer: xfer=0xc36eb800,
flags=6, pipe=0xc37a7480, running=0
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usbd_dump_queue: pipe=0xc37a7480
Jun 30 20:16:00 <kern.crit> kirika2 kernel: usb_insert_transfer:
pipe=0xc37a7480 running=0 timeout=5000
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_transfer_complete:
pipe=0xc37a7480 xfer=0xc36eb800 status=0 actlen=2
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_transfer_complete: repeat=0 new
head=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_start_next: pipe=0xc37a7480,
xfer=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_free_xfer: 0xc36eb800
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_alloc_xfer() = 0xc36eb800
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_transfer: xfer=0xc36eb800,
flags=6, pipe=0xc37a7480, running=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_dump_queue: pipe=0xc37a7480
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_insert_transfer:
pipe=0xc37a7480 running=0 timeout=5000
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_transfer_complete:
pipe=0xc37a7480 xfer=0xc36eb800 status=0 actlen=28
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_transfer_complete: repeat=0 new
head=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_start_next: pipe=0xc37a7480,
xfer=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_free_xfer: 0xc36eb800
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_alloc_xfer() = 0xc36eb800
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_transfer: xfer=0xc36eb800,
flags=6, pipe=0xc37a7480, running=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_dump_queue: pipe=0xc37a7480
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_insert_transfer:
pipe=0xc37a7480 running=0 timeout=5000
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_transfer_complete:
pipe=0xc37a7480 xfer=0xc36eb800 status=0 actlen=2
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_transfer_complete: repeat=0 new
head=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_start_next: pipe=0xc37a7480,
xfer=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_free_xfer: 0xc36eb800
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_alloc_xfer() = 0xc36eb800
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_transfer: xfer=0xc36eb800,
flags=6, pipe=0xc37a7480, running=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_dump_queue: pipe=0xc37a7480
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_insert_transfer:
pipe=0xc37a7480 running=0 timeout=5000
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_transfer_complete:
pipe=0xc37a7480 xfer=0xc36eb800 status=0 actlen=14
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_transfer_complete: repeat=0 new
head=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_start_next: pipe=0xc37a7480,
xfer=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_free_xfer: 0xc36eb800
Jun 30 20:16:01 <kern.crit> kirika2 kernel: ugenopen: flag=1, mode=8192, unit=0
endpt=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: ugenioctl: cmd=40125569
Jun 30 20:16:01 <kern.crit> kirika2 kernel: ugenclose: flag=1, mode=8192,
unit=0, endpt=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: ugenclose: close control
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_alloc_xfer() = 0xc36eb800
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_transfer: xfer=0xc36eb800,
flags=6, pipe=0xc350a380, running=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_dump_queue: pipe=0xc350a380
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_insert_transfer:
pipe=0xc350a380 running=0 timeout=5000
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_transfer_complete:
pipe=0xc350a380 xfer=0xc36eb800 status=0 actlen=2
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_transfer_complete: repeat=0 new
head=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_start_next: pipe=0xc350a380,
xfer=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_free_xfer: 0xc36eb800
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_alloc_xfer() = 0xc36eb800
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_transfer: xfer=0xc36eb800,
flags=6, pipe=0xc350a380, running=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_dump_queue: pipe=0xc350a380
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_insert_transfer:
pipe=0xc350a380 running=0 timeout=5000
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_transfer_complete:
pipe=0xc350a380 xfer=0xc36eb800 status=0 actlen=46
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_transfer_complete: repeat=0 new
head=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_start_next: pipe=0xc350a380,
xfer=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_free_xfer: 0xc36eb800
Jun 30 20:16:01 <kern.crit> kirika2 kernel: ugenopen: flag=3, mode=8192, unit=0
endpt=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: ugenioctl: cmd=80045572
Jun 30 20:16:01 <kern.crit> kirika2 kernel: ugenioctl: cmd=c018556f
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_alloc_xfer() = 0xc36eb800
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_transfer: xfer=0xc36eb800,
flags=6, pipe=0xc37a7480, running=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_dump_queue: pipe=0xc37a7480
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_insert_transfer:
pipe=0xc37a7480 running=0 timeout=1000
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_transfer_complete:
pipe=0xc37a7480 xfer=0xc36eb800 status=0 actlen=8
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_transfer_complete: repeat=0 new
head=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_start_next: pipe=0xc37a7480,
xfer=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_free_xfer: 0xc36eb800
Jun 30 20:16:01 <kern.crit> kirika2 kernel: ugenioctl: cmd=80045572
Jun 30 20:16:01 <kern.crit> kirika2 kernel: ugenioctl: cmd=c018556f
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_alloc_xfer() = 0xc36eb800
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_transfer: xfer=0xc36eb800,
flags=6, pipe=0xc37a7480, running=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_dump_queue: pipe=0xc37a7480
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_insert_transfer:
pipe=0xc37a7480 running=0 timeout=1000
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_transfer_complete:
pipe=0xc37a7480 xfer=0xc36eb800 status=0 actlen=18
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_transfer_complete: repeat=0 new
head=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_start_next: pipe=0xc37a7480,
xfer=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_free_xfer: 0xc36eb800
Jun 30 20:16:01 <kern.crit> kirika2 kernel: ugenclose: flag=3, mode=8192,
unit=0, endpt=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: ugenclose: close control
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_alloc_xfer() = 0xc3082800
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_transfer: xfer=0xc3082800,
flags=6, pipe=0xc31c4880, running=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_dump_queue: pipe=0xc31c4880
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_insert_transfer:
pipe=0xc31c4880 running=0 timeout=5000
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_transfer_complete:
pipe=0xc31c4880 xfer=0xc3082800 status=0 actlen=2
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_transfer_complete: repeat=0 new
head=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_start_next: pipe=0xc31c4880,
xfer=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_free_xfer: 0xc3082800
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_alloc_xfer() = 0xc3082800
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_transfer: xfer=0xc3082800,
flags=6, pipe=0xc31c4880, running=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_dump_queue: pipe=0xc31c4880
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_insert_transfer:
pipe=0xc31c4880 running=0 timeout=5000
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_transfer_complete:
pipe=0xc31c4880 xfer=0xc3082800 status=0 actlen=18
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_transfer_complete: repeat=0 new
head=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_start_next: pipe=0xc31c4880,
xfer=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_free_xfer: 0xc3082800
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_alloc_xfer() = 0xc3082800
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_transfer: xfer=0xc3082800,
flags=6, pipe=0xc31c4880, running=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_dump_queue: pipe=0xc31c4880
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_insert_transfer:
pipe=0xc31c4880 running=0 timeout=5000
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_transfer_complete:
pipe=0xc31c4880 xfer=0xc3082800 status=0 actlen=2
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_transfer_complete: repeat=0 new
head=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_start_next: pipe=0xc31c4880,
xfer=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_free_xfer: 0xc3082800
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_alloc_xfer() = 0xc3082800
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_transfer: xfer=0xc3082800,
flags=6, pipe=0xc31c4880, running=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_dump_queue: pipe=0xc31c4880
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_insert_transfer:
pipe=0xc31c4880 running=0 timeout=5000
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_transfer_complete:
pipe=0xc31c4880 xfer=0xc3082800 status=0 actlen=28
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_transfer_complete: repeat=0 new
head=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_start_next: pipe=0xc31c4880,
xfer=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_free_xfer: 0xc3082800
Jun 30 20:16:01 <kern.crit> kirika2 kernel: ugenopen: flag=3, mode=8192, unit=0
endpt=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: ugenioctl: cmd=80045572
Jun 30 20:16:01 <kern.crit> kirika2 kernel: ugenioctl: cmd=c018556f
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_alloc_xfer() = 0xc36eb800
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_transfer: xfer=0xc36eb800,
flags=6, pipe=0xc37a7480, running=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_dump_queue: pipe=0xc37a7480
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_insert_transfer:
pipe=0xc37a7480 running=0 timeout=5000
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_transfer_complete:
pipe=0xc37a7480 xfer=0xc36eb800 status=0 actlen=28
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_transfer_complete: repeat=0 new
head=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_start_next: pipe=0xc37a7480,
xfer=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_free_xfer: 0xc36eb800
Jun 30 20:16:01 <kern.crit> kirika2 kernel: ugenioctl: cmd=80045572
Jun 30 20:16:01 <kern.crit> kirika2 kernel: ugenioctl: cmd=c018556f
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_alloc_xfer() = 0xc36eb800
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_transfer: xfer=0xc36eb800,
flags=6, pipe=0xc37a7480, running=0
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usbd_dump_queue: pipe=0xc37a7480
Jun 30 20:16:01 <kern.crit> kirika2 kernel: usb_insert_transfer:
pipe=0xc37a7480 running=0 timeout=5000
Jun 30 20:16:06 <kern.crit> kirika2 kernel: usb_add_task: task=0xc36eb990
Jun 30 20:16:06 <kern.crit> kirika2 kernel: usb_task_thread: woke up
task=0xc36eb990
Jun 30 20:16:06 <kern.crit> kirika2 kernel: usb_transfer_complete:
pipe=0xc37a7480 xfer=0xc36eb800 status=15 actlen=0
Jun 30 20:16:06 <kern.crit> kirika2 kernel: usb_transfer_complete: repeat=0 new
head=0
Jun 30 20:16:06 <kern.crit> kirika2 kernel: usbd_start_next: pipe=0xc37a7480,
xfer=0
Jun 30 20:16:06 <kern.crit> kirika2 kernel: usbd_free_xfer: 0xc36eb800
Jun 30 20:16:06 <kern.crit> kirika2 kernel: ugenclose: flag=3, mode=8192,
unit=0, endpt=0
Jun 30 20:16:06 <kern.crit> kirika2 kernel: ugenclose: close control
Jun 30 20:16:33 <kern.crit> kirika2 kernel: usb_event_thread: woke up
Jun 30 20:16:33 <kern.crit> kirika2 kernel: usb_discover
Jun 30 20:16:36 <kern.crit> kirika2 kernel: usb_event_thread: woke up
Jun 30 20:16:36 <kern.crit> kirika2 kernel: usb_discover
Jun 30 20:17:33 <kern.crit> kirika2 kernel: usb_event_thread: woke up
Jun 30 20:17:33 <kern.crit> kirika2 kernel: usb_discover
Jun 30 20:17:36 <kern.crit> kirika2 kernel: usb_event_thread: woke up
Jun 30 20:17:36 <kern.crit> kirika2 kernel: usb_discover
Jun 30 20:18:27 <kern.crit> kirika2 kernel: netsmb_dev: loaded
Jun 30 20:18:33 <kern.crit> kirika2 kernel: usb_event_thread: woke up
Jun 30 20:18:33 <kern.crit> kirika2 kernel: usb_discover
Jun 30 20:18:36 <kern.crit> kirika2 kernel: usb_event_thread: woke up
Jun 30 20:18:36 <kern.crit> kirika2 kernel: usb_discover
_______________________________________________
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"
