Hi, I've tried to get 2 different webcams working under 8.1-rel with webcamd (0.1.14). But neither usb webcam is willing to work...
The first is a Logitech V-UAP41 : [b...@bsdaddict] /etc# kldstat -vvv | grep cuse 19 1 0xc1294000 47b8 cuse4bsd.ko (/boot/modules/cuse4bsd.ko) [b...@bsdaddict] /etc# usbconfig list ... ugen3.2: <Camera vendor 0x046d> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON [b...@bsdaddict] /etc# webcamd -d ugen3.2 -i 0 -v -1 -B Webcamd is already running for ugen3.2.0 The second is an older one : a Creative Webcam 5. This one gets recognized, but... The webcam gets recognized in dmesg : ugen3.2: <vendor 0x041e> at usbus3 pwc0: <vendor 0x041e product 0x400c, class 0/0, rev 1.10/0.02, addr 2> on usbus3 pwc0: This camera is equipped with a Hyundai CMOS sensor (0) But a bit further down the road, my dmesg shows this : ... ugen3.2: <(null)> at usbus3 (disconnected) uhub_reattach_port: could not allocate new device uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 usb_alloc_device: set address 2 failed (USB_ERR_STALLED, ignored) usb_alloc_device: getting device descriptor at addr 2 failed, USB_ERR_STALLED usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_STALLED, ignored) usbd_req_re_enumerate: getting device descriptor at addr 2 failed, USB_ERR_STALLED usbd_req_re_enumerate: addr=2, port reset failed, USB_ERR_TIMEOUT ugen3.2: <(null)> at usbus3 (disconnected) uhub_reattach_port: could not allocate new device ugen3.2: <vendor 0x041e> at usbus3 pwc0: <vendor 0x041e product 0x400c, class 0/0, rev 1.10/0.02, addr 2> on usbus3 pwc0: This camera is equipped with a Hyundai CMOS sensor (0) ugen3.2: <vendor 0x041e> at usbus3 (disconnected) pwc0: at uhub3, port 1, addr 2 (disconnected) ugen3.2: <vendor 0x041e> at usbus3 pwc0: <vendor 0x041e product 0x400c, class 0/0, rev 1.10/0.02, addr 2> on usbus3 pwc0: This camera is equipped with a Hyundai CMOS sensor (0) ugen3.2: <vendor 0x041e> at usbus3 (disconnected) and that goes on for a while. Are my 2 cams too old or is something else wrong here ? How do i get (one) webcam working in p. ex. skype ? Thanks for any help here. Beni. PS : i am not subscribed to this mailinglist, so please put me in cc. _______________________________________________ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"