Thanks for the new USB 3.0 effort!
I'm testing it out on 9.0-CURRENT amd64. The controller seems to find a
2.0 usb stick fine. However, when I plug in a Western Digital 3.0
drive, the device fails to attach. The WD drive attaches fine when
plugging into a 2.0 port on the motherboard.
Controller info:
xh...@pci0:5:0:0: class=0x0c0330 card=0xffffffff chip=0x01941033
rev=0x03 hdr=0x00
vendor = 'NEC Electronics Hong Kong'
class = serial bus
subclass = USB
bar [10] = type Memory, range 64, base 0xfbbfe000, size 8192, enabled
cap 01[50] = powerspec 3 supports D0 D3 current D0
cap 05[70] = MSI supports 8 messages, 64 bit
cap 11[90] = MSI-X supports 8 messages in map 0x10
cap 10[a0] = PCI-Express 2 endpoint max data 128(128) link x1(x1)
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
ecap 0003[140] = Serial 1 ffffffffffffffff
ecap 0018[150] = unknown 1
WD 3.0 Drive Info ( while plugged into the 2.0 port ):
ugen3.4: <My Book 3.0 Western Digital> at usbus3, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0210
bDeviceClass = 0x0000
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0040
idVendor = 0x1058
idProduct = 0x1123
bcdDevice = 0x1010
iManufacturer = 0x0001 <Western Digital>
iProduct = 0x0002 <My Book 3.0>
iSerialNumber = 0x0003 <XXXRemovedXXX>
bNumConfigurations = 0x0001
Output when plugging in the Western Digital 3.0 into the 3.0 port:
Oct 21 01:03:54 gandalf root: Unknown USB device: vendor 0x1058 product
0x1123 bus uhub4
Oct 21 01:03:54 gandalf kernel: ugen4.2: <Western Digital> at usbus4
Oct 21 01:03:54 gandalf kernel: umass0: <Western Digital My Book 3.0,
class 0/0, rev 3.00/10.10, addr 1> on usbus4
Oct 21 01:03:54 gandalf kernel: umass0: SCSI over Bulk-Only; quirks =
0x0000
Oct 21 01:03:55 gandalf kernel: umass0:9:0:-1: Attached to scbus9
Oct 21 01:03:57 gandalf root: ZFS: zpool I/O failure, zpool=wd3.1 error=28
Oct 21 01:03:57 gandalf last message repeated 2 times
Oct 21 01:03:57 gandalf root: ZFS: vdev I/O failure, zpool=wd3.1 path=
offset= size= error=
Oct 21 01:04:03 gandalf kernel: ugen4.2: <Western Digital> at usbus4
(disconnected)
Oct 21 01:04:03 gandalf kernel: umass0: at uhub4, port 2, addr 1
(disconnected)
Oct 21 01:04:03 gandalf kernel: (da0:umass-sim0:0:0:0): lost device
Oct 21 01:04:03 gandalf kernel: (da0:umass-sim0:0:0:0): got CAM status 0xa
Oct 21 01:04:03 gandalf kernel: (da0:umass-sim0:0:0:0): fatal error,
failed to attach to device
Oct 21 01:04:03 gandalf kernel: (da0:umass-sim0:0:
Oct 21 01:04:03 gandalf kernel: 0:0): removing device entry
Oct 21 01:04:14 gandalf root: ZFS: zpool I/O failure, zpool=wd3.1 error=28
Oct 21 01:04:14 gandalf last message repeated 2 times
Oct 21 01:04:14 gandalf root: ZFS: vdev I/O failure, zpool=wd3.1 path=
offset= size= error=
Output when plugging in the WD 3.0 into the 2.0 port:
Oct 21 01:15:20 gandalf root: Unknown USB device: vendor 0x1058 product
0x1123 bus uhub3
Oct 21 01:15:20 gandalf kernel: ugen3.4: <Western Digital> at usbus3
Oct 21 01:15:20 gandalf kernel: umass0: <Western Digital My Book 3.0,
class 0/0, rev 2.10/10.10, addr 4> on usbus3
Oct 21 01:15:20 gandalf kernel: umass0: SCSI over Bulk-Only; quirks =
0x0000
Oct 21 01:15:21 gandalf kernel: umass0:9:0:-1: Attached to scbus9
Oct 21 01:15:28 gandalf kernel: da0 at umass-sim0 bus 0 scbus9 target 0
lun 0
Oct 21 01:15:28 gandalf kernel: da0: <WD My Book 3.0 1123 1010> Fixed
Direct Access SCSI-4 device
Oct 21 01:15:28 gandalf kernel: da0: 40.000MB/s transfers
Oct 21 01:15:28 gandalf kernel: da0: 953867MB (1953519616 512 byte
sectors: 255H 63S/T 121600C)
Output when plugging in 2.0 device into the 3.0 port:
Oct 21 01:09:54 gandalf root: Unknown USB device: vendor 0x090c product
0x1000 bus uhub4
Oct 21 01:09:54 gandalf kernel: ugen4.2: <USB> at usbus4
Oct 21 01:09:54 gandalf kernel: umass1: <USB Flash Disk, class 0/0, rev
2.00/11.00, addr 1> on usbus4
Oct 21 01:09:54 gandalf kernel: umass1: SCSI over Bulk-Only; quirks =
0x0000
Oct 21 01:09:55 gandalf kernel: umass1:10:1:-1: Attached to scbus10
Oct 21 01:09:56 gandalf kernel: (probe0:umass-sim1:1:0:0): TEST UNIT
READY. CDB: 0 0 0 0 0 0
Oct 21 01:09:56 gandalf kernel: (probe0:umass-sim1:1:0:0): CAM status:
SCSI Status Error
Oct 21 01:09:56 gandalf kernel: (probe0:umass-sim1:1:0:0): SCSI status:
Check Condition
Oct 21 01:09:56 gandalf kernel: (probe0:umass-sim1:1:0:0): SCSI sense:
UNIT ATTENTION asc:28,0 (Not ready to ready change, medium may have changed)
Oct 21 01:09:56 gandalf kernel: da1 at umass-sim1 bus 1 scbus10 target 0
lun 0
Oct 21 01:09:56 gandalf kernel: da1: <USB Flash Disk 1100> Fixed Direct
Access SCSI-0 device
Oct 21 01:09:56 gandalf kernel: da1: 40.000MB/s transfers
Oct 21 01:09:56 gandalf kernel: da1: 956MB (1957888 512 byte sectors:
64H 32S/T 956C)
--Michael
_______________________________________________
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"
