El día Tuesday, January 11, 2011 a las 09:54:51AM +0100, Matthias Apitz escribió:
> > Hello, > > Inserting a microSD card (with an adapter) into my Dell M4400 laptop > gives no messages in /var/log/messages, even after kldload'ing mmc.ko > and mmcsd.ko... What I am missing? The card itself works fine in some > other Linux laptop. I also checked the BIOS and the slot is enabled. > > Thanks > > _______________________________________________ > freebsd-questi...@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org" With more time I did some tests on my netbooks, the Acer D250 which runs a 9-CURRENT and with the EeePC which still is on 8-CURRENT; When I insert and remove the microSD card in 9-CURRENT the device attaches fine and can be mounted: Feb 6 09:57:33 tinyCurrent kernel: ugen4.3: <Generic> at usbus4 (disconnected) Feb 6 09:57:33 tinyCurrent kernel: umass0: at uhub4, port 8, addr 3 (disconnected) Feb 6 09:57:33 tinyCurrent kernel: (da0:umass-sim0:0:0:0): lost device Feb 6 09:57:33 tinyCurrent kernel: (da0:umass-sim0:0:0:0): removing device entry Feb 6 09:57:35 tinyCurrent kernel: ugen4.3: <Generic> at usbus4 Feb 6 09:57:35 tinyCurrent kernel: umass0: <Bulk-In, Bulk-Out, Interface> on usbus4 Feb 6 09:57:35 tinyCurrent kernel: umass0: SCSI over Bulk-Only; quirks = 0x0000 Feb 6 09:57:35 tinyCurrent guru: Unknown USB device: vendor 0x0bda product 0x0159 bus uhub4 Feb 6 09:57:36 tinyCurrent kernel: umass0:0:0:-1: Attached to scbus0 Feb 6 09:57:37 tinyCurrent kernel: (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 Feb 6 09:57:37 tinyCurrent kernel: (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error Feb 6 09:57:37 tinyCurrent kernel: (probe0:umass-sim0:0:0:0): SCSI status: Check Condition Feb 6 09:57:37 tinyCurrent kernel: (probe0:umass-sim0:0:0:0): SCSI sense: UNIT ATTENTION asc:28,0 (Not ready to ready change, medium may have changed) Feb 6 09:57:37 tinyCurrent kernel: da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 Feb 6 09:57:37 tinyCurrent kernel: da0: <Generic- Multi-Card 1.00> Removable Direct Access SCSI-0 device Feb 6 09:57:37 tinyCurrent kernel: da0: 40.000MB/s transfers Feb 6 09:57:37 tinyCurrent kernel: da0: 486MB (996352 512 byte sectors: 64H 32S/T 486C) Feb 6 09:57:38 tinyCurrent kernel: GEOM: da0: partition 1 does not start on a track boundary. Feb 6 09:57:38 tinyCurrent kernel: GEOM: da0: partition 1 does not end on a track boundary. Feb 6 09:57:41 tinyCurrent kernel: ugen4.3: <Generic> at usbus4 (disconnected) Feb 6 09:57:41 tinyCurrent kernel: umass0: at uhub4, port 8, addr 3 (disconnected) Feb 6 09:57:41 tinyCurrent kernel: (da0:umass-sim0:0:0:0): lost device Feb 6 09:57:41 tinyCurrent kernel: (da0:umass-sim0:0:0:0): removing device entry in 8-CURRENT it is only available when the card is inserted before booting; then the device is seen and mountable: Feb 6 09:37:31 tiny kernel: umass0: <ENE UB6225, class 0/0, rev 2.00/1.00, addr 2> on usbus4 Feb 6 09:37:31 tiny kernel: umass0: SCSI over Bulk-Only; quirks = 0x0000 Feb 6 09:37:31 tiny kernel: Root mount waiting for: usbus4 Feb 6 09:37:31 tiny kernel: umass0:0:0:-1: Attached to scbus0 Feb 6 09:37:31 tiny kernel: Trying to mount root from ufs:/dev/ad2s1a Feb 6 09:37:31 tiny kernel: (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 Feb 6 09:37:31 tiny kernel: (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error Feb 6 09:37:31 tiny kernel: (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition Feb 6 09:37:31 tiny kernel: (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 Feb 6 09:37:31 tiny kernel: (probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed Feb 6 09:37:31 tiny kernel: (probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data) Feb 6 09:37:31 tiny kernel: da0 at umass-sim0 bus 0 target 0 lun 0 Feb 6 09:37:31 tiny kernel: da0: <USB2.0 CardReader SD0 0100> Removable Direct Access SCSI-0 device Feb 6 09:37:31 tiny kernel: da0: 40.000MB/s transfers Feb 6 09:37:31 tiny kernel: da0: 486MB (996352 512 byte sectors: 64H 32S/T 486C) Feb 6 09:37:31 tiny kernel: GEOM: da0: partition 1 does not start on a track boundary. Feb 6 09:37:31 tiny kernel: GEOM: da0: partition 1 does not end on a track boundary. and one can even eject the card, re-insert it and re-mount it again; when the card is not inserted at boot, it is not detected later on insert: Feb 6 09:43:26 tiny kernel: umass0: <ENE UB6225, class 0/0, rev 2.00/1.00, addr 2> on usbus4 Feb 6 09:43:26 tiny kernel: umass0: SCSI over Bulk-Only; quirks = 0x0000 Feb 6 09:43:26 tiny kernel: Root mount waiting for: usbus4 Feb 6 09:43:26 tiny kernel: umass0:0:0:-1: Attached to scbus0 Feb 6 09:43:26 tiny kernel: (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 Feb 6 09:43:26 tiny kernel: (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error Feb 6 09:43:26 tiny kernel: (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition Feb 6 09:43:26 tiny kernel: (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0 Feb 6 09:43:26 tiny kernel: (probe0:umass-sim0:0:0:0): Medium not present Feb 6 09:43:26 tiny kernel: (probe0:umass-sim0:0:0:0): Unretryable error Feb 6 09:43:26 tiny kernel: da0 at umass-sim0 bus 0 target 0 lun 0 Feb 6 09:43:26 tiny kernel: da0: <USB2.0 CardReader SD0 0100> Removable Direct Access SCSI-0 device Feb 6 09:43:26 tiny kernel: da0: 40.000MB/s transfers Feb 6 09:43:26 tiny kernel: da0: Attempt to query device size failed: NOT READY, Medium not present As well a camcontrol(8) does not help. Any ideas? Thanks matthias -- Matthias Apitz t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211 e <g...@unixarea.de> - w http://www.unixarea.de/ _______________________________________________ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"