Am 19.11.2012 20:52, schrieb Hans Petter Selasky: > On Monday 19 November 2012 20:21:47 Florian Jung wrote: >> Am 19.11.2012 19:21, schrieb Hans Petter Selasky: >>> On Monday 19 November 2012 16:36:45 Florian Jung wrote: >>>>> Number: 173722 >>>>> Category: usb >>>>> Synopsis: XHCI driver bug after suspend to ram (ACPI S3 mode) >>>>> Confidential: no >>>>> Severity: non-critical >>>>> Priority: low >>>>> Responsible: freebsd-usb >>>>> State: open >>>>> Quarter: >>>>> Keywords: >>>>> Date-Required: >>>>> Class: sw-bug >>>>> Submitter-Id: current-users >>>>> Arrival-Date: Mon Nov 19 15:40:00 UTC 2012 >>>>> Closed-Date: >>>>> Last-Modified: >>>>> Originator: Florian Jung >>>>> Release: 9.0-RELEASE-p3 >>>>> Organization: >>>> >>>>> Environment: >>>> FreeBSD beastie 9.0-RELEASE-p3 FreeBSD 9.0-RELEASE-p3 #0: Tue Jun 12 >>>> 02:52:29 UTC 2012 >>>> r...@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 >>>> >>>>> Description: >>>> After entering and waking up from suspend to ram aka ACPI S3 state, the >>>> dmesg get flooded with "xhci_interrupt: host controller halted", and my >>>> USB3.0 device stops working. >>>> >>>> (It is a external hard disk drive, and the device node just vanished and >>>> won't re-appear) >>>> >>>> My USB2.0 and 1.x devices however do still work. >>>> >>>> It seems that i can provoke the generation of these "xhci_interrupt: >>>> host controller halted" messages by typing on my USB-2.0-Keyboard or by >>>> moving my USB-2.0-Mouse. >>>> >>>>> How-To-Repeat: >>>> - Start up FreeBSD >>>> - Plug in USB3.0 Harddisk >>>> - It will work. >>>> - sudo acpiconf -S 3 >>>> - re-awake the computer >>>> - ls /dev/ tells you that the harddisk is gone >>>> - dmesg tells you the "xhci_interrupt: host controller halted" messages. >>>> - replug the harddisk >>>> - it still does not work. >>> >>> If you unplug the harddisk before the suspend, does it work afterwards >>> then? >>> >>> --HPS >> >> No, that causes the same problem. >> I don't even need to attach it: boot freebsd, enter acpi s3, wake up, >> and then plug in the disk leads to the same problem. >> >> i have found out that compiling XHCI has loadable module, and unloading >> it before suspend and re-loading it afterwards solves the problem. >> >> the "xhci_interrupt: host controller halted"-messages don't appear, and >> i can use my harddisk afterwards. >> >> looks like xhci is failing to reinitalize properly after suspend? >> >> greetings, >> flo > > Hi, > > Do you have a USB 3.0 compatible BIOS? > > I think we might need to halt the XHCI as part of the resume process. Can you > try this patch: > > diff --git a/sys/dev/usb/controller/xhci.c b/sys/dev/usb/controller/xhci.c > index 756b1ed..576ed71 100644 > --- a/sys/dev/usb/controller/xhci.c > +++ b/sys/dev/usb/controller/xhci.c > @@ -578,6 +578,8 @@ xhci_set_hw_power_sleep(struct usb_bus *bus, uint32_t > state) > xhci_halt_controller(sc); > break; > case USB_HW_POWER_RESUME: > + DPRINTF("Halting the XHCI\n"); > + xhci_halt_controller(sc); > DPRINTF("Starting the XHCI\n"); > xhci_start_controller(sc); > break; > > > --HPS >
Hi i have a USB3.0-compatible BIOS. uhm, i am unable to apply this patch. my xhci.c file looks pretty different, there is no xhci_set_hw_power_sleep function, but there are xhci_suspend() and xhci_resume(). both are empty and contain only a /* XXX TODO */ uname -r now reports 9.0-RELEASE-p4, btw, i must have mistyped that :/ i've set up my freebsd system ~2 months ago, and ran freebsd-update fetch install today. that are the kernel sources i'm using. there is a line: __FBSDID("$FreeBSD: release/9.0.0/sys/dev/usb/controller/xhci.c 226904 2011-10-29 12:39:05Z hselasky $"); do i have to download different sources (how?), or did you diff against the wrong kernel tree? (sorry, i'm a freeBSD-newbie ;) ) thanks flo
signature.asc
Description: OpenPGP digital signature