Hi, I'm trying to bring up an excellent PCIe Fusion board which has no driver for FreeBSD. I used bhyve to bring up an ubuntu server ( which has an original driver by the manufacturer ) All went just fine, till I tried to pass through the board to the linux. My CPUs support all that's needed by bhyve: Xeon X5675.
The board ( pciconf -lv ) : none3@pci0:11:0:0: class=0x018000 card=0x178d103c chip=0x10051aed rev=0x01 hdr=0x00 vendor = 'Fusion-io' device = 'ioDimm3' class = mass storage none4@pci0:12:0:0: class=0x018000 card=0x178d103c chip=0x10051aed rev=0x01 hdr=0x00 vendor = 'Fusion-io' device = 'ioDimm3' class = mass storage my /boot/loader.conf has ( bhyve part ): vmm_load="YES" nmdm_load="YES" *pptdevs="11/0/0 12/0/0"* The last line crashes the system - "Interrupt trap" and the system starts to shutdown the cpus ( which gets an ugly loop till it finally reboots ) Then single user, set pptdevs="" , boot and everything is fine again. The board is an HP accelerator board with 2x160GB SLC SSDs with ( according to specifications ) 150PB lifetime and the amazing 230,000 IOPs - I'm dying to do some benchmarks with PostgreSQL ... Any advice will be highly appreciated. Thanks in advance for your time. -- ------------------------------------------------------ В. Миревски +359 884 63 74 64 _______________________________________________ freebsd-virtualization@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization To unsubscribe, send any mail to "freebsd-virtualization-unsubscr...@freebsd.org"