Hi! We're working on it in github.com/erikarn/athp/ . I'm fixing up the transmit path in the driver right now to work around firmware behaviour and Geramy is wrapping his head around DMA / busdma issues.
-adrian On Fri, 8 Mar 2019 at 03:45, Domenico Panella <pando...@gmail.com> wrote: > Hi guys, > > I am a programmer and I have a good knowledge of the C / C ++ language. In > a few weeks a new machine should arrive with the Killer 1435 wifi card. I > would like to run FreeBSD on this machine but I read that this card is not > supported. > At what point are you with the development of the driver? > > The technical specifications of this card are as follows: > > Single-chip, 2.4 / 5 GHz, 2 stream 802.11a / b / g / n / ac and BT 4.2 > 11ac 2X2 WLAN standards with low power PCIe (with L1 sub-state) > interfaces + BT 4.2 with USB1.1 interface. > Module specifications: Next generation form factor, M.2, module size = > 22mm x 30mm, Key (A-E) > Chipset: QCA6174A > > I would like to collaborate with you for the development and testing of > these drivers or other, obviously documenting me first well. > Can you give me some guidelines to get started? > > with regard > BSDUser > _______________________________________________ > freebsd-wireless@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org > " > _______________________________________________ freebsd-wireless@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
