Luiz Otavio Souza wrote: > Christopher Giese - iRapida escreveu: > >> Bom dia Pessoal >> >> Recentemente um FreeLance meu Adquiriu um Dell PowerEdge 2950 (motivos >> de processamento agressivo - risos) >> >> E ai que o FreeBSD esta encontrando apenas 1 processador (affffff desespero) >> >> vou detalhar melhor aqui para que alguem quem sabe saiba algo e de uma >> luz.... >> >> maquina: >> ---------- >> >> _/*Cotação n. 16097436*/_ >> >> 2 Processadores Intel Xeon Série 5000 Dual Core de 3.73GHz com 2x2MB >> de memória cache L2 (FSB 1.066MHz) >> >> Processadores com tecnologia EM64T >> >> 2GB de memória Fully Buffered Dimm (FBD) 533MHz (4x512MB) >> >> 01 disco rígido de 73GB SAS de 3.5" e 10.000 rpm >> >> Backplane para 4 discos rígidos de 3,5” >> >> Controladora de array integrada SAS (PERC5/i) >> >> 2 Interfaces de rede 10/100/1000 UTP Onboard >> >> 2 X INTEL PRO 1000PT >> >> Software de gerenciamento Dell Open Manage >> >> Riser com 3 slots PCI-e >> >> Fontes de alimentação redundantes e Hot-Swap >> >> Unidade de CD-ROM 24X >> >> Unidade de disco flexível de 1.44MB >> >> Sem sistema operacional >> >> Sem teclado >> >> Mouse USB 2 botões >> >> Sem monitor >> >> 3 anos de garantia com atendimento no próximo dia útil >> >> Instalação on-site não-inclusa >> >> Gabinete de 2U com trilhos para rack padrão 19" >> >> >> >> Preço unitário: R$ 17.397,63 >> >> ---------- >> >> OK...... >> >> Tive que colocar FreeBSD 6.1 (snapshot 200609) pq o 6.1 RELEASE nao >> encontrava o HD(provavel raid) SAS..... >> >> Depois de por para rodar, atualizei para o FreeBSD 6.2-pre-release (e >> customizei o kernel.... obviamente colocando a opcao de SMP) >> >> --- >> anakin-dell# cat /usr/src/sys/amd64/conf/DELL |grep SMP >> options ALTQ_NOPCC # Required for SMP build >> options SMP >> --- >> >> Ok..... o problema eh que o FreeBSD nao reconhece os 2 processadores (em >> boot e em bios eles aparecem... mas o FreeBSD os ignora, e estou >> precisando URGENTE da performance dos mesmos) >> >> segue ae um sysctl de cpu >> >> --- >> anakin-dell# sysctl -a |grep cpu >> kern.threads.virtual_cpu: 1 >> kern.ccpu: 1948 >> kern.sched.ipiwakeup.onecpu: 0 >> kern.smp.cpus: 1 >> kern.smp.maxcpus: 16 >> debug.cpufreq.verbose: 0 >> debug.cpufreq.lowest: 0 >> debug.kdb.stop_cpus: 1 >> hw.ncpu: 1 >> machdep.cpu_idle_hlt: 1 >> machdep.hlt_cpus: 0 >> dev.cpu.0.%driver: cpu >> dev.cpu.0.%parent: legacy0 >> --- >> >> Alguem teria ai alguma informacao de o que pode estar ocorrendo ???? >> Sera que eh problema no FreeBSD 6.2 Pre-release ???? sera que o FreeBSD >> nao eh compativel (SMP) com tais processadores ???? >> >> Ja googleei ate dar calo (risos) >> >> Muito obrigado pelo apoio >> >> Christopher Giese >> [EMAIL PROTECTED] >> >> >> > > Manda o dmesg completo... boot -v... > > Luiz > ------------------------- > Histórico: http://www.fug.com.br/historico/html/freebsd/ > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd > Primeiramente.... gostaria de agradecer pela atencao.... ;) valeu
segue ae ----- anakin-dell# cat dmesg.yesterday Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-STABLE-200609 #0: Thu Sep 7 18:41:08 UTC 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/SMP Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 3.73GHz (3723.85-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0xf64 Stepping = 4 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe4bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,CNTX-ID,CX16,<b14>,<b15>> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 Logical CPUs per core: 2 real memory = 2147123200 (2047 MB) avail memory = 2061750272 (1966 MB) kbd0 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) cpu0 on motherboard pcib0: <Host to PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pcib1: <PCI-PCI bridge> at device 2.0 on pci0 pci5: <PCI bus> on pcib1 pcib2: <PCI-PCI bridge> at device 0.0 on pci5 pci6: <PCI bus> on pcib2 pcib3: <PCI-PCI bridge> at device 0.0 on pci6 pci7: <PCI bus> on pcib3 pcib4: <PCI-PCI bridge> at device 0.0 on pci7 pci8: <PCI bus> on pcib4 bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem 0xd6000000-0xd7ffffff irq 5 at device 0.0 on pci8 bce0: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz miibus0: <MII bus> on bce0 brgphy0: <BCM5708C 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bce0: Ethernet address: 00:13:72:5e:37:86 pcib5: <PCI-PCI bridge> at device 1.0 on pci6 pci9: <PCI bus> on pcib5 em0: <Intel(R) PRO/1000 Network Connection Version - 6.1.4> port 0xdce0-0xdcff mem 0xd5ee0000-0xd5efffff,0xd5ec0000-0xd5edffff irq 11 at device 0.0 on pci9 em0: Ethernet address: 00:15:17:0b:1a:84 em0: [FAST] pcib6: <PCI-PCI bridge> at device 0.3 on pci5 pci10: <PCI bus> on pcib6 pcib7: <PCI-PCI bridge> at device 3.0 on pci0 pci1: <PCI bus> on pcib7 pcib8: <PCI-PCI bridge> at device 0.0 on pci1 pci2: <PCI bus> on pcib8 mpt0: <LSILogic SAS Adapter> port 0xec00-0xecff mem 0xde6fc000-0xde6fffff,0xde6e0000-0xde6effff irq 5 at device 8.0 on pci2 mpt0: [GIANT-LOCKED] mpt0: MPI Version=1.5.12.0 mpt0: mpt_cam_event: 0x16 mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). mpt0: mpt_cam_event: 0x12 mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required). mpt0: mpt_cam_event: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE mpt0: mpt_cam_event: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE mpt0: mpt_cam_event: 0x16 mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). pcib9: <PCI-PCI bridge> at device 4.0 on pci0 pci11: <PCI bus> on pcib9 em1: <Intel(R) PRO/1000 Network Connection Version - 6.1.4> port 0xcce0-0xccff mem 0xde3e0000-0xde3fffff,0xde3c0000-0xde3dffff irq 5 at device 0.0 on pci11 em1: Ethernet address: 00:15:17:0b:1b:f5 em1: [FAST] pcib10: <PCI-PCI bridge> at device 5.0 on pci0 pci12: <PCI bus> on pcib10 pcib11: <PCI-PCI bridge> at device 6.0 on pci0 pci13: <PCI bus> on pcib11 pcib12: <PCI-PCI bridge> at device 7.0 on pci0 pci14: <PCI bus> on pcib12 pcib13: <PCI-PCI bridge> at device 28.0 on pci0 pci3: <PCI bus> on pcib13 pcib14: <PCI-PCI bridge> at device 0.0 on pci3 pci4: <PCI bus> on pcib14 bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem 0xda000000-0xdbffffff irq 5 at device 0.0 on pci4 bce1: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz miibus1: <MII bus> on bce1 brgphy1: <BCM5708C 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bce1: Ethernet address: 00:13:72:5e:37:84 uhci0: <UHCI (generic) USB controller> port 0xace0-0xacff irq 11 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0xacc0-0xacdf irq 10 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0xaca0-0xacbf irq 11 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xde800000-0xde8003ff irq 11 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered uhub4: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 2 uhub4: multiple transaction translators uhub4: 4 ports with 4 removable, self powered pcib15: <PCI-PCI bridge> at device 30.0 on pci0 pci15: <PCI bus> on pcib15 pci15: <display, VGA> at device 13.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xc9fff,0xcf000-0xd07ff,0xec000-0xeffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Dell Dell USB Mouse, rev 1.10/29.10, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 3723845622 Hz quality 800 Timecounters tick every 1.000 msec acd0: CDROM <TEAC CD-ROM CD-224E-N/3.AB> at ata0-master UDMA33 ses0 at mpt0 bus 0 target 8 lun 0 ses0: <DP BACKPLANE 1.00> Fixed Enclosure Services SCSI-5 device ses0: 300.000MB/s transfers, Tagged Queueing Enabled ses0: SCSI-3 SES Device da0 at mpt0 bus 0 target 0 lun 0 da0: <MAXTOR ATLAS10K5_073SAS BP00> Fixed Direct Access SCSI-5 device da0: 300.000MB/s transfers, Tagged Queueing Enabled da0: 70007MB (143374650 512 byte sectors: 255H 63S/T 8924C) Trying to mount root from ufs:/dev/da0s1a em0: link state changed to UP ----- t+ Chris ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd