Estou fazendo atualização do meu Sistema.
Obrigado Marcus Alves Grando escreveu: > Carlos Eduardo Vazzatta wrote: > >> Verifiquei as irq >> >> # more dmesg.boot | grep irq >> ioapic0 <Version 1.1> irqs 0-15 on motherboard >> ioapic1 <Version 1.1> irqs 16-31 on motherboard >> fxp0: <Intel 82559 Pro/100 Ethernet> port 0x5400-0x543f mem >> 0xf8101000-0xf8101fff,0xf8000000-0xf80fffff irq 18 at device 3.0 on pci0 >> asr0: <Adaptec Caching SCSI RAID> mem 0xfa000000-0xfbffffff irq 26 at >> device 6.1 on pci0 >> ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x5800-0x58ff mem >> 0xfc020000-0xfc020fff irq 16 at device 4.0 on pci2 >> ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x6000-0x60ff mem >> 0xfc021000-0xfc021fff irq 17 at device 4.1 on pci2 >> bge0: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem >> 0xfc000000-0xfc00ffff irq 20 at device 10.0 on pci2 >> bge1: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem >> 0xfc010000-0xfc01ffff irq 21 at device 11.0 on pci2 >> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on >> acpi0 >> sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 >> ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq >> 3 on acpi0 >> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 >> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 >> atkbd0: <AT Keyboard> irq 1 on atkbdc0 >> psm0: <PS/2 Mouse> irq 12 on atkbdc0 >> >> Aparentemente não tem conflito de irq >> As que dão problema são as broadcom. As duas estão em switches >> diferentes. A intel não acusa. >> Pode ser isso? Pode ser esse tipo de placa? Driver talvez? >> > > Menos um ;) > > Seguinte, teu problema já foi resolvido no RELENG_6. Ou atualize o teu > sistema para o RELENG_6 ou aplique esses patchs: > > http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/bge/if_bge.c.diff?r1=1.91.2.14&r2=1.91.2.17&only_with_tag=RELENG_6 > http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/bge/if_bgereg.h.diff?r1=1.36.2.5&r2=1.36.2.7&only_with_tag=RELENG_6 > > Abraços > > >> obrigado >> Abraços >> >> Marcus Alves Grando escreveu: >> >>> Carlos Eduardo Vazzatta wrote: >>> >>> >>>> Ola pessoal >>>> >>>> Estou com um problema. Minhas conexões com o servidor estão caindo e da >>>> a seguinte messagem: >>>> >>>> apollo2 kernel: bge0: watchdog timeout -- resetting >>>> apollo2 kernel: bge0: link state changed to DOWN >>>> apollo2 kernel: bge0: link state changed to UP >>>> apollo2 kernel: bge0: watchdog timeout -- resetting >>>> apollo2 kernel: bge0: link state changed to DOWN >>>> apollo2 kernel: bge0: link state changed to UP >>>> apollo2 kernel: bge0: watchdog timeout -- resetting >>>> apollo2 kernel: bge0: link state changed to DOWN >>>> apollo2 kernel: bge0: link state changed to UP >>>> >>>> Voces sabem o que posso fazer? Tenho a 6.1-RELEASE FreeBSD 6.1-RELEASE #0: >>>> >>>> >>> O pessoal tá discutindo sobre isso mesmo nas listas do FreeBSD. É um >>> problema conhecido que estão tentando resolver. Alguns casos tem a ver >>> com IRQ compartilhada. Dá uma olhada se a IRQ que está sendo usada pela >>> placa bge0 está sendo usado por outro periférico também. Caso sim, como >>> por exemplo USB tente desabilitar ele temporariamente na BIOS. >>> >>> O dmesg sempre ajuda quando for reportar algo... >>> >>> Abraços >>> >>> >>> >>>> Valeu >>>> Carlos Vazzatta >>>> Analista de Suporte >>>> UCS >>>> ------------------------- >>>> Histórico: http://www.fug.com.br/historico/html/freebsd/ >>>> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd >>>> >>>> >>> >>> >> ------------------------- >> Histórico: http://www.fug.com.br/historico/html/freebsd/ >> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd >> > > > ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd