Instalei o MesaLib e agora? # glxinfo name of display: :0.0 libGL warning: 3D driver claims to not support visual 0x65 display: :0 screen: 0 direct rendering: Yes
# glxgears libGL warning: 3D driver claims to not support visual 0x65 5464 frames in 5.0 seconds = 1092.683 FPS 5689 frames in 5.0 seconds = 1137.780 FPS E segue abaixo o meu xorg.conf (depois de varias tentativas) Section "ServerLayout Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" # InputDevice "Synaptics_Touchpad" "CorePointer" InputDevice "Synaptics_Touchpad" "SendCoreEvents" InputDevice "Keyboard0" "CoreKeyboard" Option "AIGLX" "True" # Option "DisableGLXRootClipping" "True" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" ModulePath "/usr/X11R6/lib/xorg/modules/" ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/TTF/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/CID/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" EndSection Section "Module" Load "dbe" Load "dri" Load "extmod" Load "glx" #Load "GLcore" Load "record" Load "xtrap" Load "freetype" Load "type1" Load "synaptics" EndSection Section "DRI" group 0 Mode 0666 EndSection Section "Extensions" Option "Composite" "Enable" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "pc102" Option "XkbLayout" "gb" EndSection Section "InputDevice" Identifier "Synaptics_Touchpad" Driver "synaptics" Option "Device" "/dev/psm0" Option "Protocol" "psm" Option "LeftEdge" "1700" Option "RightEdge" "5300" Option "TopEdge" "1700" Option "RightEdge" "5300" Option "TopEdge" "1700" Option "BottomEdge" "4200" Option "FingerLow" "25" Option "FingerHigh" "30" Option "MaxTapTime" "180" Option "MaxTapMove" "220" Option "VertScrollDelta" "100" Option "HorizScrollDelta" "100" Option "MinSpeed" "0.06" Option "MaxSpeed" "0.06" Option "AccelFactor" "0.0010" Option "ScrollButtonRepeat" "100" Option "UpDownScrolling" "on" Option "UpDownRepeat" "on" Option "LeftRightScrolling" "on" Option "LeftRightRepeat" "on" # "SHMConfig on" seems good works with synclient(1). But this # options is insecure. I recommended "off" as default. Option "SHMConfig" "on" # If you use circular touchpad, uncomment them. # Option "CircularPad" "on" # Option "CircularScrolling" "on" # Option "CircScrollDelta" "0.5" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "Auto" Option "Device" "/dev/sysmouse" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" #DisplaySize 300 190 # mm Identifier "Monitor0" VendorName "SEC" ModelName "4457" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "ColorKey" # <i> #Option "CacheLines" # <i> #Option "Dac6Bit" # [<bool>] #Option "DRI" # [<bool>] #Option "NoDDC" # [<bool>] #Option "ShowCache" # [<bool>] #Option "XvMCSurfaces" # <i> #Option "XvMCSurfaces" # <i> #Option "PageFlip" # [<bool>] Identifier "Card0" Driver "intel" VendorName "Intel Corporation" BoardName "Mobile Integrated Graphics Controller" BusID "PCI:0:2:0" Option "XAANoOffscreenPixmaps" "true" Option "DRI" "true" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 24 Subsection "Display" Depth 24 # Modes "1600x1200" "1440x900" "1024x768" "800x600" Modes "1600x1200" ViewPort 0 0 # Depth 16 # Modes "1600x1200" "1440x900" "1024x768" "800x600" # ViewPort 0 0 EndSubsection EndSection Tudo start normal... soh quando aplico o compiz ou beryl n'ao tenho bordas e alguns efeitos... Abracos!!! -- ThOLOko ThOmaz BeLgine -FrEEBSD- UniX TeaM (LeT's MaKe InStaLL ClEan) ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd