Verifique a sua tabela de rotas Eu tive o mesmo problema, e so com um "xaxo" eu resolvi. #netstat -rn veja se o ip da interface esta no tun correto
2008/6/3 Rodrigo Roberto Barros <[EMAIL PROTECTED]>: > Pessoal, > Alguém já configurou um Cliente VPN PPTP no FreeBSD ?? > > Estou editando o arquivo /etc/ppp/ppp.conf , e uso o comando "pptp end.Serv. > EMPRESA" > > > --------------------------- > default: > set log Phase Chat LCP IPCP CCP tun command > ident user-ppp VERSION (built COMPILATIONDATE) > > set device /dev/cuad1 > > set speed 115200 > set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \ > \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT" > set timeout 180 # 3 minute idle timer (the default) > enable dns # request DNS info (for resolv.conf) > > papchap: > set phone PHONE_NUM > set authname USERNAME > set authkey PASSWORD > > set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 > add default HISADDR # Add a (sticky) default route > > EMPRESA: > set authname usuario > set authkey ********** > set timeout 0 > set ifaddr 0 0 > add 192.1.0.0/48 HISADDR > alias enable yes > > ------------------- > > > Ele faz a autenticação, pega o IP mas não passa o trafego. Nenhum, já criei a > rota ate na mão, mas ele não aceita, será que preciso colocar mais alguma > informação no arquivo de configuração acima ?? > > > > > > Agradeço a ajuda, > > Rodrigo Roberto Barros > [EMAIL PROTECTED] > > ------------------------- > Histórico: http://www.fug.com.br/historico/html/freebsd/ > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd > -- Giancarlo Rubio ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd