Alterei um monte, mudei as cripto e outras configuracoes agora aparentemente a fase 1 passa mas depois começa a pipocar de novo, veja o log o isakmpd:
144852.295219 Default isakmpd: phase 1 done: initiator id c8b45402: 100.1.1.2, responder id c9378c04: 100.1.1.1, src: 100.1.1.1 dst: 100.1.1.2 144852.430833 Default isakmpd: quick mode done: src: 100.1.1.1 dst: 100.1.1.2 144852.535963 Default message_parse_payloads: reserved field non-zero: ff 144852.535988 Default dropped message from 100.1.1.2 port 500 due to notification type PAYLOAD_MALFORMED 144852.650157 Default message_parse_payloads: reserved field non-zero: ff 144852.650181 Default dropped message from 100.1.1.2 port 500 due to notification type PAYLOAD_MALFORMED Alguma dica? OBS: Valeu Sergio Segue a minha conf nova: [General] Retransmits= 5 Exchange-max-time= 120 Listen-on= 100.1.1.1 [Phase 1] 100.1.1.1= local-remote [local-remote] Phase= 1 Transport= udp Local-address= 100.1.1.1 Address= 100.1.1.2 Configuration= Default-main-mode Authentication= 123456 [Phase 2] Connections= VPN-local-remote-10.9.2.0/255.255.255.0 [VPN-local-remote-10.9.2.0/255.255.255.0] Phase= 2 ISAKMP-peer= local-remote Configuration= Default-quick-mode Local-ID= network-192.168.254.0/255.255.255.0 Remote-ID= network-10.9.2.0/255.255.255.0 [network-192.168.254.0/255.255.255.0] ID-type= IPV4_ADDR_SUBNET Network= 192.168.254.0 Netmask= 255.255.255.0 [network-10.9.2.0/255.255.255.0] ID-type= IPV4_ADDR_SUBNET Network= 10.9.2.0 Netmask= 255.255.255.0 [Default-main-mode] DOI= IPSEC EXCHANGE_TYPE= ID_PROT Transforms= 3DES-SHA [Default-quick-mode] DOI= IPSEC EXCHANGE_TYPE= QUICK_MODE Suites= QM-ESP-3DES-SHA-PFS-GRP2-SUITE -- Matheus Cucoloto System Admin. Net Admin. ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd