no final da mensagem: "estou pensando em usar a interface lagg0 para solucionar isso (nos testes funcionou com vlan) no modo failover.
O que acham ????" hehehehe.... é que quero poder usar o spanning tree :) ... fazer uma extensão do switch. ai fica animal o projeto. 2009/3/12 renato martins <renato...@gmail.com>: > voce já tentou com lag ? > > 2009/3/12 Luiz Gustavo S. Costa <luizgust...@luizgustavo.pro.br> > >> Salve lista, >> >> Eu estou tentando implementar uma bridge para redundância de interface >> (usando spanning tree) só que estou esbarrando na barreira de >> implementar vlan sobre bridge. >> >> ao tentar fazer testes, tive o seguinte diagnostico: >> >> # ifconfig bridge0 create >> # ifconfig bridge0 addm le1 addm le2 (usei bridge normal por causa que >> é um teste) >> # ifconfig brigde0 up >> # ifconfig vlan10 create >> # ifconfig vlan10 vlan 10 vlandev bridge0 >> ifconfig: SIOCSETVLAN: Protocol not supported >> >> Então é isso mesmo ? bridge não suporta vlan :( .... >> >> Eu encontrei isso no man do bridge (# man bridge): >> >> The packets destined to the bridging host will be seen by the filter on >> the interface with the MAC address equal to the packet's destination >> MAC. >> There are situations when some of the bridge members are sharing the >> same >> MAC address (for example the vlan(4) interfaces: they are currenly >> shar- >> ing the MAC address of the parent physical interface). It is not >> possi- >> ble to distinguish between these interfaces using their MAC address, >> excluding the case when the packet's destination MAC address is equal >> to >> the MAC address of the interface on which the packet was entered to the >> system. In this case the filter will see the incoming packet on this >> interface. In all other cases the interface seen by the packet filter >> is >> chosen from the list of bridge members with the same MAC address and >> the >> result strongly depends on the member addition sequence and the actual >> implementation of if_bridge. It is not recommended to rely on the >> order >> chosen by the current if_bridge implementation: it can be changed in >> the >> future. >> >> Mas e no caso de usar stp (spanning tree) não cairia nesse caso, pois >> somente uma interface estaria em uso.... >> >> Eu encontrei esse site: >> http://blogs.freebsdish.org/thompsa/2007/06/14/bridging-a-vlan-trunk/ >> >> mas não tive muito avanço até agora.... >> >> estou pensando em usar a interface lagg0 para solucionar isso (nos >> testes funcionou com vlan) no modo failover. >> >> O que acham ???? >> >> Obrigado. >> >> -- >> Luiz Gustavo Costa >> >> mundoUnix - Consultoria em Software Livre >> http://www.mundounix.com.br >> ICQ: 2890831 / MSN: gustavo....@gmail.com >> ------------------------- >> Histórico: http://www.fug.com.br/historico/html/freebsd/ >> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd >> > ------------------------- > Histórico: http://www.fug.com.br/historico/html/freebsd/ > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd > -- Luiz Gustavo Costa mundoUnix - Consultoria em Software Livre http://www.mundounix.com.br ICQ: 2890831 / MSN: gustavo....@gmail.com ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd