Opa Paulo, Peguei o equipamento ontem e nada. Não consegui resolver ainda. Mesmo com o FreeBSD 8.2-STABLE o equipamento se auto desliga randomicamente. Abaixo o dmesg dela:
Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.2-STABLE #0: Thu Jun 23 04:13:40 BRT 2011 r...@zeus.linuxinfo.com.br:/usr/obj/usr/src/sys/GONDIM amd64 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU E5606 @ 2.13GHz (2133.32-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x206c2 Family = 6 Model = 2c Stepping = 2 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 8589934592 (8192 MB) avail memory = 8150536192 (7772 MB) ACPI APIC Table:<INTEL S5500BC> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 2 package(s) x 4 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 2 cpu2 (AP): APIC ID: 18 cpu3 (AP): APIC ID: 20 cpu4 (AP): APIC ID: 32 cpu5 (AP): APIC ID: 34 cpu6 (AP): APIC ID: 50 cpu7 (AP): APIC ID: 52 ioapic0<Version 2.0> irqs 0-23 on motherboard ioapic1<Version 2.0> irqs 24-47 on motherboard lapic0: Forcing LINT1 to edge trigger kbd1 at kbdmux0 cryptosoft0:<software crypto> on motherboard acpi0:<INTEL S5500BC> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0:<24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0:<ACPI CPU> on acpi0 cpu1:<ACPI CPU> on acpi0 cpu2:<ACPI CPU> on acpi0 cpu3:<ACPI CPU> on acpi0 cpu4:<ACPI CPU> on acpi0 cpu5:<ACPI CPU> on acpi0 cpu6:<ACPI CPU> on acpi0 cpu7:<ACPI CPU> on acpi0 pcib0:<ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0:<ACPI PCI bus> on pcib0 pcib1:<ACPI PCI-PCI bridge> irq 28 at device 1.0 on pci0 pci1:<ACPI PCI bus> on pcib1 em0:<Intel(R) PRO/1000 Network Connection 7.2.3> port 0x1000-0x101f mem 0xb1a00000-0xb1a1ffff,0xb1900000-0xb19fffff,0xb1a20000-0xb1a23fff irq 28 at device 0.0 on pci1 em0: Using MSIX interrupts with 3 vectors em0: [ITHREAD] em0: [ITHREAD] em0: [ITHREAD] em0: Ethernet address: 00:1e:67:07:9d:cd pcib2:<ACPI PCI-PCI bridge> irq 24 at device 3.0 on pci0 pci2:<ACPI PCI bus> on pcib2 pcib3:<ACPI PCI-PCI bridge> irq 30 at device 7.0 on pci0 pci3:<ACPI PCI bus> on pcib3 pcib4:<ACPI PCI-PCI bridge> irq 32 at device 9.0 on pci0 pci4:<ACPI PCI bus> on pcib4 pci0:<base peripheral, interrupt controller> at device 16.0 (no driver attached) pci0:<base peripheral, interrupt controller> at device 16.1 (no driver attached) pci0:<base peripheral, interrupt controller> at device 17.0 (no driver attached) pci0:<base peripheral, interrupt controller> at device 17.1 (no driver attached) pci0:<base peripheral, interrupt controller> at device 20.0 (no driver attached) pci0:<base peripheral, interrupt controller> at device 20.1 (no driver attached) pci0:<base peripheral, interrupt controller> at device 20.2 (no driver attached) pci0:<base peripheral, interrupt controller> at device 20.3 (no driver attached) pci0:<base peripheral> at device 22.0 (no driver attached) pci0:<base peripheral> at device 22.1 (no driver attached) pci0:<base peripheral> at device 22.2 (no driver attached) pci0:<base peripheral> at device 22.3 (no driver attached) pci0:<base peripheral> at device 22.4 (no driver attached) pci0:<base peripheral> at device 22.5 (no driver attached) pci0:<base peripheral> at device 22.6 (no driver attached) pci0:<base peripheral> at device 22.7 (no driver attached) em1:<Intel(R) PRO/1000 Network Connection 7.2.3> port 0x20e0-0x20ff mem 0xb1b00000-0xb1b1ffff,0xb1b43000-0xb1b43fff irq 20 at device 25.0 on pci0 em1: Using an MSI interrupt em1: [FILTER] em1: Ethernet address: 00:1e:67:07:9d:cc uhci0:<Intel 82801JI (ICH10) USB controller USB-D> port 0x20c0-0x20df irq 19 at device 26.0 on pci0 uhci0: [ITHREAD] usbus0:<Intel 82801JI (ICH10) USB controller USB-D> on uhci0 uhci1:<Intel 82801JI (ICH10) USB controller USB-E> port 0x20a0-0x20bf irq 19 at device 26.1 on pci0 uhci1: [ITHREAD] usbus1:<Intel 82801JI (ICH10) USB controller USB-E> on uhci1 uhci2:<Intel 82801JI (ICH10) USB controller USB-F> port 0x2080-0x209f irq 19 at device 26.2 on pci0 uhci2: [ITHREAD] usbus2:<Intel 82801JI (ICH10) USB controller USB-F> on uhci2 ehci0:<Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xb1b41000-0xb1b413ff irq 19 at device 26.7 on pci0 ehci0: [ITHREAD] usbus3: EHCI version 1.0 usbus3:<Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0 pcib5:<ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci5:<ACPI PCI bus> on pcib5 pcib6:<ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci6:<ACPI PCI bus> on pcib6 vgapci0:<VGA-compatible display> mem 0xb0000000-0xb0ffffff,0xb1800000-0xb1803fff,0xb1000000-0xb17fffff irq 16 at device 0.0 on pci6 uhci3:<Intel 82801JI (ICH10) USB controller USB-A> port 0x2060-0x207f irq 16 at device 29.0 on pci0 uhci3: [ITHREAD] usbus4:<Intel 82801JI (ICH10) USB controller USB-A> on uhci3 uhci4:<Intel 82801JI (ICH10) USB controller USB-B> port 0x2040-0x205f irq 16 at device 29.1 on pci0 uhci4: [ITHREAD] usbus5:<Intel 82801JI (ICH10) USB controller USB-B> on uhci4 uhci5:<Intel 82801JI (ICH10) USB controller USB-C> port 0x2020-0x203f irq 16 at device 29.2 on pci0 uhci5: [ITHREAD] usbus6:<Intel 82801JI (ICH10) USB controller USB-C> on uhci5 ehci1:<Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xb1b40000-0xb1b403ff irq 16 at device 29.7 on pci0 ehci1: [ITHREAD] usbus7: EHCI version 1.0 usbus7:<Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1 pcib7:<ACPI PCI-PCI bridge> at device 30.0 on pci0 pci7:<ACPI PCI bus> on pcib7 isab0:<PCI-ISA bridge> at device 31.0 on pci0 isa0:<ISA bus> on isab0 atapci0:<Intel ICH10 SATA300 controller> port 0x2158-0x215f,0x216c-0x216f,0x2150-0x2157,0x2168-0x216b,0x2130-0x213f,0x2120-0x212f irq 18 at device 31.2 on pci0 atapci0: [ITHREAD] ata2:<ATA channel 0> on atapci0 ata2: [ITHREAD] ata3:<ATA channel 1> on atapci0 ata3: [ITHREAD] pci0:<serial bus, SMBus> at device 31.3 (no driver attached) atapci1:<Intel ICH10 SATA300 controller> port 0x2148-0x214f,0x2164-0x2167,0x2140-0x2147,0x2160-0x2163,0x2110-0x211f,0x2100-0x210f irq 21 at device 31.5 on pci0 atapci1: [ITHREAD] ata4:<ATA channel 0> on atapci1 ata4: [ITHREAD] ata5:<ATA channel 1> on atapci1 ata5: [ITHREAD] acpi_button0:<Sleep Button> on acpi0 atrtc0:<AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 acpi_hpet0:<High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 qpi0:<QPI system bus> on motherboard pcib8:<QPI Host-PCI bridge> pcibus 255 on qpi0 pci255:<PCI bus> on pcib8 pcib9:<QPI Host-PCI bridge> pcibus 254 on qpi0 pci254:<PCI bus> on pcib9 orm0:<ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff on isa0 atkbd: unable to set the command byte. sc0:<System console> at flags 0x100 on isa0 sc0: VGA<16 virtual consoles, flags=0x300> vga0:<Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0:<Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0:<AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to set the command byte. est0:<Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0:<CPU Frequency Thermal Control> on cpu0 est1:<Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1:<CPU Frequency Thermal Control> on cpu1 est2:<Enhanced SpeedStep Frequency Control> on cpu2 p4tcc2:<CPU Frequency Thermal Control> on cpu2 est3:<Enhanced SpeedStep Frequency Control> on cpu3 p4tcc3:<CPU Frequency Thermal Control> on cpu3 est4:<Enhanced SpeedStep Frequency Control> on cpu4 p4tcc4:<CPU Frequency Thermal Control> on cpu4 est5:<Enhanced SpeedStep Frequency Control> on cpu5 p4tcc5:<CPU Frequency Thermal Control> on cpu5 est6:<Enhanced SpeedStep Frequency Control> on cpu6 p4tcc6:<CPU Frequency Thermal Control> on cpu6 est7:<Enhanced SpeedStep Frequency Control> on cpu7 p4tcc7:<CPU Frequency Thermal Control> on cpu7 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. ipfw2 (+ipv6) initialized, divert enabled, nat enabled, rule-based forwarding enabled, default to accept, logging disabled DUMMYNET 0 with IPv6 initialized (100409) load_dn_sched dn_sched FIFO loaded load_dn_sched dn_sched PRIO loaded load_dn_sched dn_sched QFQ loaded load_dn_sched dn_sched RR loaded load_dn_sched dn_sched WF2Q+ loaded usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 usbus7: 480Mbps High Speed USB v2.0 ugen0.1:<Intel> at usbus0 uhub0:<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1:<Intel> at usbus1 uhub1:<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1:<Intel> at usbus2 uhub2:<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1:<Intel> at usbus3 uhub3:<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen4.1:<Intel> at usbus4 uhub4:<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1:<Intel> at usbus5 uhub5:<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1:<Intel> at usbus6 uhub6:<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ugen7.1:<Intel> at usbus7 uhub7:<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 ad4: 953869MB<Seagate ST31000528AS CC44> at ata2-master UDMA100 SATA 3Gb/s acd0: DVDR<HL-DT-ST DVDRAM GH22NS50/TN03> at ata3-master UDMA100 SATA 1.5Gb/s lapic20: Forcing LINT1 to edge trigger SMP: AP CPU #3 Launched! lapic34: Forcing LINT1 to edge trigger SMP: AP CPU #5 Launched! lapic2: Forcing LINT1 to edge trigger SMP: AP CPU #1 Launched! lapic52: Forcing LINT1 to edge trigger SMP: AP CPU #7 Launched! lapic18: Forcing LINT1 to edge trigger SMP: AP CPU #2 Launched! lapic32: Forcing LINT1 to edge trigger SMP: AP CPU #4 Launched! lapic50: Forcing LINT1 to edge trigger SMP: AP CPU #6 Launched! Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 usbus0 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered Root mount waiting for: usbus7 usbus3 Root mount waiting for: usbus7 usbus3 uhub3: 6 ports with 6 removable, self powered uhub7: 6 ports with 6 removable, self powered Trying to mount root from ufs:/dev/ad4s1a WARNING: / was not properly dismounted ugen0.2:<CHESEN> at usbus0 ukbd0:<CHESEN USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus0 kbd2 at ukbd0 uhid0:<CHESEN USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus0 ugen2.2:<American Megatrends Inc.> at usbus2 ukbd1:<Keyboard Interface> on usbus2 kbd3 at ukbd1 ums0:<Mouse Interface> on usbus2 ums0: 3 buttons and [Z] coordinates ID=0 WARNING: /tmp was not properly dismounted WARNING: /usr was not properly dismounted WARNING: /var was not properly dismounted em0: link state changed to UP Esses warning é porque ela desliga do nada e aí obviamente lá vai um fsck e pior que demora pacas porque o disco é de 1Tb. Em 17/06/2011 17:32, Paulo Henrique - BSDs Brasil escreveu: > Tem algum dmesg para poder ver o que a placa-mãe possui. > NO site da intel a descrićão é muito resumida, o que diz que ela possui > o que de fato o FreeBSD suporta, não sei quanto IPMI2.0. > Att. > Marcelo Gondim wrote: >> Em 17/06/2011 15:21, Paulo Henrique - BSDs Brasil escreveu: >> >>> Inicia o FreeBSD em modo debug e manda a saida para nós. >>> Informaćão quanto ao solucionamento importantissima para a lista. >>> >>> Att. >>> >>> >> Opa Paulo, >> >> Vou tentar mas o problema dá randomicamente. O sistema inicia normal, >> fica lá no login tranqüilo e do nada desliga e liga. >> Mas com certeza descobrindo uma solução estarei postando aqui. O >> equipamento está agora em um laboratório no Rio em testes para >> descobrirmos o motivo ou pelo menos tentarmos. >> >> >>> Marcelo Gondim wrote: >>> >>>> Olá pessoal, >>>> >>>> Comprei um equipamento dual Quad Xeon e esse usa uma motherboard >>>> S5500BCR que é dual processada. O que ocorre é o seguinte: >>>> >>>> Na instalação do FreeBSD 8.2-release a máquina simplesmente desliga dá >>>> uns apitos indicando problema e re-inicia novamente sozinha. Consegui >>>> com muito custo terminar a instalação do sistema mas não estou >>>> conseguindo atualizar para a versão 8.2-stable porque ela sempre >>>> re-inicia antes mesmo de eu completar. Sei que muitos vão achar que é um >>>> problema no hardware ou elétrica, também achei isso e troquei fonte, >>>> memória, processador e até a motherboard e nada resolveu. Testei com >>>> outros sistemas como windows 2008 e linux e o problema não ocorre mas >>>> com o FreeBSD está acontecendo isso. Alguém faz idéia do que seja? >>>> Porque procurei nos logs e não vi nada, dmesg também nada. >>>> Estou pensando em tirar o hd, colocar em outro equipamento, atualizar >>>> para a 8.2-stable e colocar de volta para ver se acontece o mesmo >>>> problema. >>>> >>>> Alguém passou por esse pepino? >>>> >>>> []´s >>>> >>>> Gondim >>>> ------------------------- >>>> Histórico: http://www.fug.com.br/historico/html/freebsd/ >>>> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd >>>> >>>> >>> ------------------------- >>> Histórico: http://www.fug.com.br/historico/html/freebsd/ >>> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd >>> >> ------------------------- >> Histórico: http://www.fug.com.br/historico/html/freebsd/ >> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd >> > ------------------------- > Histórico: http://www.fug.com.br/historico/html/freebsd/ > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd