Você setou o ip 192.168.2.48/30 nas duas maquinas, de cara ai já vai dar conflito de ip, somente dê um up na interface via rc.conf
ifconfig_em1="up" deixe que o freevrrpd atribue o ip na interface, a comunicação que ele faz com o outro lado é via broadcast On Thu, 12 Apr 2012 13:15:17 -0300 Alisson <alissongoncal...@bsd.com.br> wrote: > seguindo a orientação de voces... fiz algumas alterações e instalei o > freevrrp para os /30 > > veja como ficou no rc.conf do MASTER > > ipv4_addrs_em0="192.168.1.44/25" > ipv4_addrs_em1="192.168.2.48/30" > > /usr/local/etc/freevrrpd.conf > > #MASTER > [VRID] > serverid = 1 > interface = em1 > priority = 101 > addr = 192.168.2.49/30 > password = vrid1 > > veja como ficou no rc.conf do SLAVE > > ipv4_addrs_em0="192.168.1.45/25" > ipv4_addrs_em1="192.168.2.48/30" > > /usr/local/etc/freevrrpd.conf > > #SLAVE > [VRID] > serverid = 1 > interface = em1 > priority = 100 > addr = 192.168.2.49/30 > password = vrid1 > > e veja o erro do messages > > Apr 12 12:10:55 master freevrrpd[4490]: initializing threads and all VRID > Apr 12 12:10:55 master freevrrpd[4490]: reading configuration file > /usr/local/etc/freevrrpd.conf > Apr 12 12:10:55 master freevrrpd[4490]: cannot create an eiface/ether > netgraph interface: Address already in use > Apr 12 12:10:55 master kernel: ngeth5: link state changed to UP > Apr 12 12:10:55 master kernel: ngeth5: link state changed to DOWN > Apr 12 12:10:55 master freevrrpd[4490]: ng_ether.ko is probably not loaded, > use kldload ng_ether.ko before running freevrrpd > Apr 12 12:10:55 master freevrrpd[4490]: cannot create a virtual interface > via netgraph: Address already in use > Apr 12 12:10:55 master freevrrpd[4490]: check that ng_socket, ng_ether, > ng_eiface and ng_bridge are loaded > > > > > > > > Em 11 de abril de 2012 10:27, Luiz Gustavo > <luizgust...@luizgustavo.pro.br>escreveu: > > > On Wed, 11 Apr 2012 09:59:34 -0300 > > Alisson <alissongoncal...@bsd.com.br> wrote: > > > > > isso que eu temia... > > > > > > entao quer dizer que se voce entrega um /30 para fazer um ponto a ponto > > > para um cliente > > > > > > voce tera que entregar um /29 > > > > > > nao tem outro jeito no FreeBSD? > > > > > > > [root@desktop] /usr/ports# cat net/freevrrpd/pkg-descr > > freevrrpd is a VRRP (Virtual Router Redundancy Protocol) implementation > > daemon under FreeBSD, NetBSD and OpenBSD. > > This daemon has been rewritten from scratch and is not based on > > existing projects. In this second public release, you can find: > > > > * A daemon RFC 2338 Compliant adapted on FreeBSD systems > > * Implementation of Virtual Adresses > > * Support for multiples VRID > > * Master announce state by sending multicast packets via BPF > > * Changing routes and IP in 3 seconds > > * Doing gratuitous ARP requests to clean the cache of all hosts > > * Election between different slave servers > > * Same host can be Slave and Master at the same time > > * Automatic Downgrade to Slave if a Master is up again > > * Anti-Address Conflict system > > * Multi-threaded vrrp daemon > > * Plain text password authentication > > * Using now only one BPF device for all VRID > > * Support netmask for Virtual IP addresses > > * Support for monitored circuit and dependances between VRIDs > > * Support for VLAN pseudo devices under *BSD > > > > -- > > --- > > Luiz Gustavo Costa (Powered by BSD) > > *+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+ > > mundoUnix - Consultoria em Software Livre > > http://www.mundounix.com.br > > ICQ: 2890831 / MSN: cont...@mundounix.com.br > > Tel: 55 (21) 4063-7110 / 8194-1905 / (11) 4063-0407 > > Blog: http://www.luizgustavo.pro.br > > -- --- Luiz Gustavo Costa (Powered by BSD) *+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+ mundoUnix - Consultoria em Software Livre http://www.mundounix.com.br ICQ: 2890831 / MSN: cont...@mundounix.com.br Tel: 55 (21) 4063-7110 / 8194-1905 / (11) 4063-0407 Blog: http://www.luizgustavo.pro.br ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd