Olá, cara, por enquanto o FreeBSD só suporta PV em i386 [1]. Você está usando amd64. Tenta substituir pra ver...
[1] - http://wiki.freebsd.org/FreeBSD/Xen On 11/29/12 9:28 AM, Deny Codig wrote: > Bom dia Alexandre vou esclarecer mais agora > > Quando falo em muito trafego é trafego real , este BSD é o gateway da rede, > tem firewall nele, dhcp , dns, proxy , vpn (vtund e mpd), nao tem httpd nem > email pois estes estao em serviços separados virtualizados no linux sem > problemas. > Eu tenho quase 250 maquinas ligadas em rede , essas redes são dividas nas 5 > placas de rede que lhe falei sao redes 10.91.x.x cada rede em uma placa da > virtualizadora . Quando começa a ter trafego entre as redes é que fica lento > , eu disparo um ping da rede 10.91.8.x para a rede 10.91.12.x começo a perder > pacotes sendo que o servidor é 10.91.11.1 , agora se pingo direto para o > servidor nao perco pacote, e se pingo de dentro do servidor para uma dessas > redes nao tenho perda entao o trafego se perde quando passa por ele , quando > reinicio tudo até comecar a ter trafego em todas as redes tudo anda muito bem > fiz o teste fora do horario de expediente e só com trafego normal nao tive > perda alguma o problema é o aumento do trafego . > > [root@newxenfw ~]# xen > xen-detect xenstore xenstore-chmod xenstore-control > xenstore-exists xenstore-list xenstore-ls xenstore-read > xenstore-rm xenstore-write > [root@newxenfw ~]# xen-detect > Running in HVM context on Xen v4.1. > > FreeBSD newxenfw.saa.org.br 9.1-RC3 FreeBSD 9.1-RC3 #1: Mon Nov 12 14:57:53 > BRST 2012 r...@saasrv09.saa.org.br:/usr/obj/usr/src/sys/XENHVM amd64 > > Estou utilizando o XEN 6.0.1 e o BSD 9.1-rc3 > > ifconfig -a > > Neste momento só tenho uma placa ativa neste servidor só para acessar , veja > o media type esta em Ethernet manual > > plip0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> metric 0 mtu 1500 > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > pflog0: flags=0<> metric 0 mtu 33152 > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > pfsync0: flags=0<> metric 0 mtu 1500 > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > syncpeer: 0.0.0.0 maxupd: 128 > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 > options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 > inet 127.0.0.1 netmask 0xff000000 > nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> > xn0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > options=503<RXCSUM,TXCSUM,TSO4,LRO> > ether e6:4d:93:4c:e1:56 > inet 10.91.8.117 netmask 0xfffffe00 broadcast 10.91.9.255 > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: Ethernet manual > status: active > > > dmesg > > Copyright (c) 1992-2012 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 9.1-RC3 #1: Mon Nov 12 14:57:53 BRST 2012 > r...@dsasrv09.dsa.org.br:/usr/obj/usr/src/sys/XENHVM amd64 > CPU: Intel(R) Xeon(R) CPU E5-2609 0 @ 2.40GHz (2400.06-MHz K8-class CPU) > Origin = "GenuineIntel" Id = 0x206d7 Family = 6 Model = 2d Stepping = 7 > > Features=0x781fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,MMX,FXSR,SSE,SSE2> > > Features2=0x83b82203<SSE3,PCLMULQDQ,SSSE3,CX16,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,HV> > AMD Features=0x28000800<SYSCALL,RDTSCP,LM> > AMD Features2=0x1<LAHF> > real memory = 7079985152 (6752 MB) > avail memory = 6788546560 (6474 MB) > Event timer "LAPIC" quality 400 > ACPI APIC Table: <Xen HVM> > FreeBSD/SMP: Multiprocessor System Detected: 3 CPUs > FreeBSD/SMP: 3 package(s) x 1 core(s) > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 2 > cpu2 (AP): APIC ID: 4 > ioapic0: Changing APIC ID to 1 > MADT: Forcing active-low polarity and level trigger for SCI > ioapic0 <Version 1.1> irqs 0-47 on motherboard > kbd1 at kbdmux0 > acpi0: <Xen> on motherboard > acpi0: Power Button (fixed) > acpi0: Sleep Button (fixed) > acpi0: reservation of 0, a0000 (3) failed > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > cpu2: <ACPI CPU> on acpi0 > hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 > Timecounter "HPET" frequency 62500000 Hz quality 950 > attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > Event timer "i8254" frequency 1193182 Hz quality 100 > atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 > Event timer "RTC" frequency 32768 Hz quality 0 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 > acpi_timer0: <32-bit timer at 3.579545MHz> port 0x1f48-0x1f4b on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > isab0: <PCI-ISA bridge> at device 1.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel PIIX3 WDMA2 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc220-0xc22f at device 1.1 on pci0 > ata0: <ATA channel> at channel 0 on atapci0 > ata1: <ATA channel> at channel 1 on atapci0 > uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xc200-0xc21f irq 23 at > device 1.2 on pci0 > usbus0: controller did not stop > usbus0 on uhci0 > pci0: <bridge> at device 1.3 (no driver attached) > vgapci0: <VGA-compatible display> mem > 0xf0000000-0xf1ffffff,0xf3000000-0xf3000fff irq 24 at device 2.0 on pci0 > xenpci0: <Xen Platform Device> port 0xc000-0xc0ff mem 0xf2000000-0xf2ffffff > irq 30 at device 3.0 on pci0 > xenstore0: <XenStore> on xenpci0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: model IntelliMouse Explorer, device ID 4 > fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 > fdc0: does not respond > device_attach: fdc0 attach returned 6 > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > orm0: <ISA Option ROM> at iomem 0xc9000-0xc97ff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > fdc0: No FDOUT register! > ctl: CAM Target Layer loaded > Timecounters tick every 10.000 msec > usbus0: 12Mbps Full Speed USB v1.0 > xenbusb_front0: <Xen Frontend Devices> on xenstore0 > ugen0.1: <Intel> at usbus0 > uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 > xn0: <Virtual Network Interface> at device/vif/0 on xenbusb_front0 > xn0: Ethernet address: e6:4d:93:4c:e1:56 > xenbusb_back0: <Xen Backend Devices> on xenstore0 > xctrl0: <Xen Control Device> on xenstore0 > xn0: backend features: feature-sg feature-gso-tcp4 > xbd1: 122880MB <Virtual Block Device> at device/vbd/832 on xenbusb_front0 > xbd1: attaching as ad1 > xbd2: 92160MB <Virtual Block Device> at device/vbd/768 on xenbusb_front0 > xbd2: attaching as ad0 > uhub0: 2 ports with 2 removable, self powered > ugen0.2: <QEMU 0.10.2> at usbus0 > ums0: <Endpoint1 Interrupt Pipe> on usbus0 > ums0: 3 buttons and [Z] coordinates ID=0 > cd0 at ata1 bus 0 scbus1 target 1 lun 0 > cd0: <QEMU QEMU DVD-ROM 0.10> Removable CD-ROM SCSI-0 device > cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes) > cd0: Attempt to query device size failed: NOT READY, Medium not present > SMP: AP CPU #1 Launched! > SMP: AP CPU #2 Launched! > Trying to mount root from ufs:/dev/ad0p2 [rw]... > xn0: 2 link states coalesced > WARNING: attempt to domain_add(netgraph) after domainfinalize() > > > On Nov 28, 2012, at 4:49 PM, Alexandre Biancalana wrote: > >> Olá! >> >> 2012/11/28 Deny Codig <deny.san...@gmail.com>: >>> Boa tarde , instalei recentemente o freebsd 9 e o 9.1-rc3 virtualizados no >>> xen juntamente com o xentools , kernel XENHVM , até ai tudo bem , o >>> problema foi depois de levantar o freebsd e colocar 5 redes com 5 placas de >>> redes diferentes , quando ele começa a trafegar dados entre as redes começa >>> a perder pacotes ou seja tudo que passa por dentro dele e vai para outra >>> rede perde muito pacote até ficar lento ao extremo, eu fiz todo tipo de >>> tunning no servidor , tirei o LSO da placa , alterei os maxfiles entre >>> outras alterações nos modulos do kernel e mesmo assim quando começa a ter >>> muito trafego na rede que passa por ele fica tudo muito lento . >> Vamos lá, temos várias "medidas" subjetivas aqui e falta de >> informações... oque é muito trafego ? >> >> Você poderia mandar o dmesg dessa VM ? >> >> Poderia mandar um ifconfig -a ? >> >> Está usando FW ? Qual ? >> >> Qual o tipo de tráfego que passa por essa maquina ? Como ele é gerado >> (netperf, scp ou é tráfego real) ? >> >> >>> Alguem ja teve alguma experencia recente com o XEN + BSD e conseguiu fazer >>> ele rodar PV (para-virtualizado) , creio que o maior problema é que as >>> placas de rede sao virtualizadas e nao conseguem trabalhar corretamente com >>> o xen , no BSD 9.1 ja tivemos uma melhora enorme com relação a velocidade >>> porem ainda tenho problemas com trafego muito grande o problema tambem é >>> que em media na placa de rede aparece Manual e nao a Full Duplex , e nao >>> muda de forma alguma. >> Eu já usei o Free rodando em PV (na verdade PFSense) mas isso foi em >> casa e não tinha mto tráfego passando... Entretanto compilando o >> kernel XENHVM já adiciona drivers PV mesmo rodando em HVM (mais infos >> http://wiki.freebsd.org/FreeBSD/Xen), atualmente utilizo XCP com >> PFSense com kernel XENHVM, não testei ainda a performance de rede, mas >> posso fazê-lo a noite ;-) >> >> >>> Se alguem tiver alguma dica , preciso usar o BSD virtualizado para nosso >>> projeto que esta substituindo as maquinas fisicas , nao quero ter que >>> utilizar o linux para isso pois trabalho com BSd a anos ja . >> É isso ai vamos continuar com o Free ;-) >> ------------------------- >> Histórico: http://www.fug.com.br/historico/html/freebsd/ >> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd > ------------------------- > Histórico: http://www.fug.com.br/historico/html/freebsd/ > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd > -- Danilo Egêa Gondolfo http://daniloegea.wordpress.com "To understand the computers, we must know what computers understand." ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd