Concordo com o Nilton, Aqui na minha rede utilizo o syslog nativo e para visualizar web o log analyzer
Abs On Wed, Mar 26, 2014 at 4:46 PM, Nilton Jose Rizzo <[email protected]>wrote: > Sinceramente porque não usa o syslogd do sistema???? > > > > SYSLOGD(8) FreeBSD System Manager's Manual > SYSLOGD(8) > > NAME > syslogd — log systems messages > > SYNOPSIS > syslogd [-468ACcdkNnosTuv] [-a allowed_peer] [-b bind_address] > [-f config_file] [-l [mode:]path] [-m mark_interval] > [-P pid_file] [-p log_socket] > > DESCRIPTION > The syslogd utility reads and logs messages to the system console, log > files, other machines and/or users as specified by its configuration > file. > > <skip> > > -a allowed_peer > Allow allowed_peer to log to this syslogd using UDP datagrams. > Multiple -a options may be specified. > > The allowed_peer option may be any of the following: > > ipaddr/masklen[:service] Accept datagrams from ipaddr (in > the > usual dotted quad notation) with > masklen bits being taken into > account > when doing the address comparison. > ipaddr can be also IPv6 address by > enclosing the address with ‘[’ and > ‘]’. If specified, service is the > name or number of an UDP service > (see > services(5)) the source packet > must > belong to. A service of ‘*’ > allows > packets being sent from any UDP > port. > The default service is ‘syslog’. > If > ipaddr is IPv4 address, a missing > masklen will be substituted by the > historic class A or class B > netmasks > if ipaddr belongs into the address > range of class A or B, > respectively, > or by 24 otherwise. If ipaddr is > IPv6 address, a missing masklen > will > be substituted by 128. > > domainname[:service] Accept datagrams where the reverse > address lookup yields domainname > for > the sender address. The meaning > of > service is as explained above. > > *domainname[:service] Same as before, except that any > source host whose name ends in > domainname will get permission. > > The -a options are ignored if the -s option is also specified. > > -b bind_address[:service] > > -b :service > Bind to a specific address and/or port. The address can be > spec‐ > ified as a hostname, and the port as a service name. If an > IPv6 > address is specified, it should be enclosed with ‘[’ and ‘]’. > The default service is ‘syslog’. > > > > O proprio FreeBSD tem isso porque reinventar a roda? > > > Rizzo > > ------------------------- > Histórico: http://www.fug.com.br/historico/html/freebsd/ > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd > ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
