Em 27 de jan de 2016 4:09 PM, "Frederico A M Saraiva" <famsara...@gmail.com> escreveu: > > Boa tarde, > > teu processador tem a flag de virtualização nativa (svm). Então é bem > provável haver compatibilidade
Se for compatível, tem algum outro problema, ou algum erro meu. João Rocha. > > 2016-01-27 10:54 GMT-03:00 Joao Rocha Braga Filho <goffr...@gmail.com>: > > > Bom dia. > > > > Eu ando sumido da lista, mas continuo usando o FreeBSD. > > > > Neste final de semana tentei instalar o Xen no meu Desktop, que é > > um AMD Phenon 9850, com 7 anos de uso. Tenho uma placa de vídeo > > nVidia gForce 8500 de 256 MB e a placa mãe é uma Asus M3A78. > > > > O sistema é um FreeBSD 11: > > > > FreeBSD SUPER 11.0-CURRENT FreeBSD 11.0-CURRENT #2 r294062: Fri Jan 15 > > 22:35:19 BRST 2016 goffredo@SUPER:/usr/obj/usr/src/sys/SUPER amd64 > > > > Instalei o Xen-kernel dos ports. Instalei tentando fazer Dom0. > > > > Quando dei reboot ele entrou em um loop infinito de "panics", e dava pouco > > tempo para ler a mensagem de erro. Quando li falava em hardware > > incompatível. > > > > Eu devia ter fotografado a tela. > > > > Consegui parar este loop. Entrei na linha de comando do boot e desabilitei > > as variáveis que faziam o Xen subir. Assim dei o boot, e logo depois > > comentei > > as linhas do Zen nos arquivos de configuração. > > > > Estou encucado com esta mensagem de erro, e não estou achando na > > Internet nada claro se o meu processador é compatível ou não. O que > > tenho achado induz a pensar que é compatível. > > > > As linhas que coloquei nos arquivos foram: > > > > /boot/loader.conf > > > > xen_kernel="/boot/xen" > > > > xen_cmdline="dom0_mem=2048M dom0_max_vcpus=2 dom0pvh=1 com1=115200,8n1 > > guest_loglvl=all loglvl=all" > > > > console=com1 > > > > /boot/menu.rc.local > > > > try-include /boot/xen.4th > > > > > > Na pior das hipóteses eu faço um upgrade no meu computador para rodar o > > Xen. > > > > Ao final vai o dmesg do sistema. > > > > Agradeço a ajuda. > > > > > > > > goffredo:SUPER[955] dmesg > > > > Copyright (c) 1992-2016 The FreeBSD Project. > > > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > > > > The Regents of the University of California. All rights reserved. > > > > FreeBSD is a registered trademark of The FreeBSD Foundation. > > > > FreeBSD 11.0-CURRENT #2 r294062: Fri Jan 15 22:35:19 BRST 2016 > > > > goffredo@SUPER:/usr/obj/usr/src/sys/SUPER amd64 > > > > FreeBSD clang version 3.7.1 (tags/RELEASE_371/final 255217) 20151225 > > > > VT(vga): resolution 640x480 > > > > module_register: cannot register hostb/amdtemp from kernel; already loaded > > from amdtemp.ko > > > > Module hostb/amdtemp failed to register: 17 > > > > CPU: AMD Phenom(tm) 9850 Quad-Core Processor (2511.61-MHz K8-class CPU) > > > > Origin="AuthenticAMD" Id=0x100f23 Family=0x10 Model=0x2 Stepping=3 > > > > > > > > Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> > > > > Features2=0x802009<SSE3,MON,CX16,POPCNT> > > > > AMD > > Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> > > > > AMD > > Features2=0x7ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS> > > > > SVM: NP,NAsids=64 > > > > TSC: P-state invariant > > > > real memory = 8589934592 (8192 MB) > > > > avail memory = 8276221952 (7892 MB) > > > > Event timer "LAPIC" quality 400 > > > > ACPI APIC Table: <090108 APIC1556> > > > > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > > > > FreeBSD/SMP: 1 package(s) x 4 core(s) > > > > cpu0 (BSP): APIC ID: 0 > > > > cpu1 (AP): APIC ID: 1 > > > > cpu2 (AP): APIC ID: 2 > > > > cpu3 (AP): APIC ID: 3 > > > > random: unblocking device. > > > > ioapic0 <Version 2.1> irqs 0-23 on motherboard > > > > random: entropy device external interface > > > > kbd1 at kbdmux0 > > > > module_register_init: MOD_LOAD (vesa, 0xffffffff808d28d0, 0) error 19 > > > > vtvga0: <VT VGA driver> on motherboard > > > > cryptosoft0: <software crypto> on motherboard > > > > acpi0: <090108 RSDT1556> on motherboard > > > > acpi0: Power Button (fixed) > > > > cpu0: <ACPI CPU> on acpi0 > > > > cpu1: <ACPI CPU> on acpi0 > > > > cpu2: <ACPI CPU> on acpi0 > > > > cpu3: <ACPI CPU> on acpi0 > > > > attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 > > > > Timecounter "i8254" frequency 1193182 Hz quality 0 > > > > Event timer "i8254" frequency 1193182 Hz quality 100 > > > > atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 > > > > Event timer "RTC" frequency 32768 Hz quality 0 > > > > hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 > > > > Timecounter "HPET" frequency 14318180 Hz quality 950 > > > > Event timer "HPET" frequency 14318180 Hz quality 450 > > > > Event timer "HPET1" frequency 14318180 Hz quality 450 > > > > Event timer "HPET2" frequency 14318180 Hz quality 450 > > > > Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 > > > > acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > > > > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > > > > pci0: <ACPI PCI bus> on pcib0 > > > > pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0 > > > > pci1: <ACPI PCI bus> on pcib1 > > > > vgapci0: <VGA-compatible display> port 0xcc00-0xcc7f mem > > 0xfa000000-0xfaffffff,0xd0000000-0xdfffffff,0xf8000000-0xf9ffffff irq 18 at > > device 0.0 on pci1 > > > > vgapci0: Boot video device > > > > pcib2: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0 > > > > pci2: <ACPI PCI bus> on pcib2 > > > > re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port > > 0xd800-0xd8ff mem 0xfbeff000-0xfbefffff,0xf6ff0000-0xf6ffffff irq 18 at > > device 0.0 on pci2 > > > > re0: Using 1 MSI-X message > > > > re0: ASPM disabled > > > > re0: Chip rev. 0x3c000000 > > > > re0: MAC rev. 0x00400000 > > > > miibus0: <MII bus> on re0 > > > > rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 > > > > rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, > > 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, > > 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, > > 1000baseT-FDX-flow-master, auto, auto-flow > > > > re0: Using defaults for TSO: 65518/35/2048 > > > > re0: Ethernet address: 00:22:15:de:9a:0e > > > > ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port > > 0xb000-0xb007,0xa000-0xa003,0x9000-0x9007,0x8000-0x8003,0x7000-0x700f mem > > 0xf7fff800-0xf7fffbff irq 22 at device 17.0 on pci0 > > > > ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported > > > > ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> > > > > ahcich0: <AHCI channel> at channel 0 on ahci0 > > > > ahcich1: <AHCI channel> at channel 1 on ahci0 > > > > ahcich2: <AHCI channel> at channel 2 on ahci0 > > > > ahcich3: <AHCI channel> at channel 3 on ahci0 > > > > ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7ffe000-0xf7ffefff irq > > 16 at device 18.0 on pci0 > > > > usbus0 on ohci0 > > > > ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7ffd000-0xf7ffdfff irq > > 16 at device 18.1 on pci0 > > > > usbus1 on ohci1 > > > > ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf7fff000-0xf7fff0ff > > irq 17 at device 18.2 on pci0 > > > > ehci0: AMD SB600/700 quirk applied > > > > usbus2: EHCI version 1.0 > > > > usbus2 on ehci0 > > > > ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7ffc000-0xf7ffcfff irq > > 18 at device 19.0 on pci0 > > > > usbus3 on ohci2 > > > > ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7ffb000-0xf7ffbfff irq > > 18 at device 19.1 on pci0 > > > > usbus4 on ohci3 > > > > ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf7ffa800-0xf7ffa8ff > > irq 19 at device 19.2 on pci0 > > > > ehci1: AMD SB600/700 quirk applied > > > > usbus5: EHCI version 1.0 > > > > usbus5 on ehci1 > > > > atapci0: <ATI IXP700/800 UDMA133 controller> port > > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0 > > > > ata0: <ATA channel> at channel 0 on atapci0 > > > > ata1: <ATA channel> at channel 1 on atapci0 > > > > hdac0: <ATI SB600 HDA Controller> mem 0xf7ff4000-0xf7ff7fff irq 16 at > > device 20.2 on pci0 > > > > isab0: <PCI-ISA bridge> at device 20.3 on pci0 > > > > isa0: <ISA bus> on isab0 > > > > pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 > > > > pci3: <ACPI PCI bus> on pcib3 > > > > atapci1: <VIA 6421 SATA150 controller> port > > > > 0xec00-0xec0f,0xe880-0xe88f,0xe800-0xe80f,0xe480-0xe48f,0xe400-0xe41f,0xe000-0xe0ff > > irq 22 at device 8.0 on pci3 > > > > ata2: <ATA channel> at channel 0 on atapci1 > > > > ata3: <ATA channel> at channel 1 on atapci1 > > > > ata4: <ATA channel> at channel 2 on atapci1 > > > > ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7ff9000-0xf7ff9fff irq > > 18 at device 20.5 on pci0 > > > > usbus6 on ohci4 > > > > amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4 > > > > amdtemp0: Erratum 319: temperature measurement may be inaccurate > > > > acpi_button0: <Power Button> on acpi0 > > > > fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on > > acpi0 > > > > ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 > > > > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > > > > ppbus0: <Parallel port bus> on ppc0 > > > > lpt0: <Printer> on ppbus0 > > > > lpt0: Interrupt-driven port > > > > ppi0: <Parallel I/O> on ppbus0 > > > > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > > > > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > > > > kbd0 at atkbd0 > > > > atkbd0: [GIANT-LOCKED] > > > > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > > > > acpi_alloc_wakeup_handler: can't alloc wake memory > > > > hwpstate0: <Cool`n'Quiet 2.0> on cpu0 > > > > fuse-freebsd: version 0.4.4, FUSE ABI 7.8 > > > > Timecounters tick every 1.000 msec > > > > hdacc0: <VIA VT1708B_1 HDA CODEC> at cad 0 on hdac0 > > > > hdaa0: <VIA VT1708B_1 Audio Function Group> at nid 1 on hdacc0 > > > > pcm0: <VIA VT1708B_1 (Analog 7.1+HP/2.0)> at nid 28,34,25,35,29 and > > 26,31,30,27 on hdaa0 > > > > pcm1: <VIA VT1708B_1 (Digital)> at nid 32 on hdaa0 > > ------------------------- > > Histórico: http://www.fug.com.br/historico/html/freebsd/ > > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd > > > ------------------------- > Histórico: http://www.fug.com.br/historico/html/freebsd/ > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd