selamlar nicin DHCP kullaniyorsunuz gerek yok ki? asagidaki satirlarda router daemon'u aktif etmissiniz buna gerek yok! /etc/rc.conf'da dc0 icin ve ag ayarlari icin asagidaki bilgiler olsun yeterli ifconfig_dc0="inet 10.0.0.5 netmask 255.255.255.0" defaultrouter="10.0.0.2" hostname="www.kaostr.org"
asagidaki satirlari kaldirin ifconfig_dc0="DHCP" router_flags="-q" router="/sbin/routed" router_enable="YES" On Tue, Apr 06, 2004 at 07:16:14PM +0300, hay wrote: > ?imdi yapt?klar?m? ad?m ad?m anlatay?m.... > > /etc/rc.conf dosyasinin icerigi sekildeki gibi olunca > #ifconfig_dc0="inet 10.0.0.5 netmask 255.255.255.0" > ifconfig_dc0="DHCP" > router_flags="-q" > router="/sbin/routed" > router_enable="YES" > gateway_enable="YES" > defaultrouter="10.0.0.2" > inetd_enable="YES" > hostname="www.kaostr.org" > linux_enable="YES" > moused_enable="YES" > #moused_flags="-3" > usbd_enable="YES" > > ifconfig komutunun sonucu > dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > inet6 fe80::2e0:4cff:fea0:b15d%dc0 prefixlen 64 scopeid 0x1 > inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255 > ether 00:e0:4c:a0:b1:5d > media: Ethernet autoselect (100baseTX <full-duplex>) > status: active > plip0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500 > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 > inet 127.0.0.1 netmask 0xff000000 > > Simdi bu haldeyken > www# route add default 10.0.0.2 > route: writing to routing socket: Network is unreachable > add net default: gateway 10.0.0.2: Network is unreachable > sonucunu vermektedir. > www# ifconfig dc0 10.0.0.5 deyip > ard??ndan > www# ifconfig dc0 dedigimde > dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > inet6 fe80::2e0:4cff:fea0:b15d%dc0 prefixlen 64 scopeid 0x1 > inet 10.0.0.5 netmask 0xff000000 broadcast 10.255.255.255 > ether 00:e0:4c:a0:b1:5d > media: Ethernet autoselect (100baseTX <full-duplex>) > status: active > > durum bu oluyor ve ardindan > > www# route add default 10.0.0.2 dedigimde sonuc bu oluyor > add net default: gateway 10.0.0.2 > ve > www# sh netstart -rn dedigimde ise > hw.bus.devctl_disable: 1 -> 1 > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 > inet 127.0.0.1 netmask 0xff000000 > dhclient already running? (pid=213). > routed already running? (pid=249). > > oluyor. > > ayrica ek'te bilgi vermesi bakimindan dmesg ??kt?s?n? ekliyorum. > > Sevgi ve saygilarimla... > > ----- Original Message ----- > From: "Serhat Umar" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, April 06, 2004 6:05 PM > Subject: Re: [freebsd] internete eri?im sorunu... > > > > ok.. > > screenshot da route eklemeye calistiginiz fakat daha ?nceden default route > > oldugu icin ekleyemediginizi g?r?yorum > > > > netstat -rn ile default route nedir bir bakarmisiniz... > > ayrica default route yanlis ise route add ile degilde route change ile > > degistirin.. > > > > # route change default 10.0.0.2 > > > > daha sonra 10.0.0.2 ip adresini pinglemeye calisin, sonucu bekliyoruz. > > > > > > > > Selamlar > > Serhat > > > > > > > dostum, > > > > > > sysinstall ile sisteme route ?zelli?ini ekledikten sonra istedi?im local > > > ip'yi atayabiliyorum. fikir vermesi bak?m?ndan ek'te ?z?r dileyerek > ekran > > > ??kt?s?n? g?nderiyorum. > > > ve hala internet eri?imi yok, bunlar ba?lang?? asl?nda sorunlar?m i?in, > > > internet eri?imini sa?lda??mda di?er sorunlar ile s?k? bir cebel i?ine > > > girece?im de ?u an elim kolum ba?l?. > > > > > > not:macronix i?in .c v .h dosyalar?n? bulup kerneli yeniden derledim ama > > > sonu? yine nafile. mx0 yerine dc0 g?rmeye devam ediyor. > > > > > > ----- Original Message ----- > > > From: "Serhat Umar" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Tuesday, April 06, 2004 11:01 AM > > > Subject: Re: [freebsd] internete eri?im sorunu... > > > > > > > > > > dc0 dhcp den ip almamis g?r?n?yor, iceriyi pingliyorum derken > > 10.0.0.0/24 > > > > network?n? kastediyorsaniz ilginc c?nk? dhcpden ip adresi > > alamamisiniz... > > > > > > > > dc0: watchdog timeout hatasi icin man page inceledigimizde > > > > > > > > # man 4 dc > > > > > > > > dc%d: watchdog timeout A packet was queued for transmission and a > > > > trans- > > > > mit command was issued, but the device failed to acknowledge the > > > trans- > > > > mission before a timeout expired. This can happen if the device > is > > > > unable to deliver interrupts for some reason, of if there is a > > > problem > > > > with the network connection (cable or network equipment) that > > results > > > > in > > > > a loss of link. > > > > > > > > bir problemden dolayi transmission hatasi aliyorsunuz, network > kablosunu > > > > kontrol edin, hub/switch de farkli portlara baglayarak deneyin. > > > > > > > > Serhat > > > > > > > > > > > > > > > > > alta ve ?st dairelerde iki xp y?kl? makinaya adsl ba?lant?s?n? > > > > > payla?t?r?yorum. modemin router ?zelli?inden dolay?. modem ge?it > > olarak > > > > > 10.0.0.2'yi kullan?yor. biz de 10.0.0.4 ve 10.0.0.5'i kullan?yoruz. > ve > > > > > dinamik ip atan?yor nete ba?land???m?zda. > > > > > > > > > > ayn? i?lemleri yaln?zca bir tek makina i?in freebsd ?zerinde > deneyip, > > > > > kulland???m makinay? internete eri?tireyim istedim. kurulumda > ipv6'yi > > no > > > > > deyip dhcp'yi etkin k?l dedi?imde, modemin ???klar? ?al???r > vaziyete, > > > > xp'de > > > > > ki hale geldi. ama gelgelelim, i?eriye locale ping atabilmeme ra?men > > > > > d??ar?ya ping atam?yorum. > > > > > > > > > > ve bir de boot-a??l??ta- dc0:watchdog timeout deyip duruyor. a?a??ya > > > baz? > > > > > bilgileri yaz?yorum. sizce sorun nedir? ethernet kart? macronix > > mx98715. > > > > > > > > > > > > > > > www# ifconfig > > > > > dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > > > > > inet6 fe80::2e0:4cff:fea0:b15d%dc0 prefixlen 64 scopeid 0x1 > > > > > inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255 > > > > > ether 00:e0:4c:a0:b1:5d > > > > > media: Ethernet autoselect (100baseTX <full-duplex>) > > > > > status: active > > > > > plip0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500 > > > > > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > > > > > inet6 ::1 prefixlen 128 > > > > > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 > > > > > inet 127.0.0.1 netmask 0xff000000 > > > > > www# route add default 10.0.0.2 > > > > > route: writing to routing socket: Network is unreachable > > > > > add net default: gateway 10.0.0.2: Network is unreachable > > > > > www# ping www.freebsd.org > > > > > ping: cannot resolve www.freebsd.org: Host name lookup failure > > > > > > > > > > /etc/resolve.conf i?eri?i > > > > > nameserver 212.156.4.6 > > > > > nameserver 212.156.4.7 > > > > > > > > > > > > > > > cevaplar?n?z i?in ?imdiden te?ekk?r ederim... > > > > > > > > > -------------------------------------------------------------------------- > -- > > ---- > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > Liste arsivi: http://lists.enderunix.org ve > > > http://www.mail-archive.com/[EMAIL PROTECTED] > > > http://ipucu.EnderUNIX.org - ihtiyac duyacaginiz kisa bilgiler bu > sitede! > > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > Liste arsivi: http://lists.enderunix.org ve > > http://www.mail-archive.com/[EMAIL PROTECTED] > > http://ipucu.EnderUNIX.org - ihtiyac duyacaginiz kisa bilgiler bu sitede! > > > > > > > > > Copyright (c) 1992-2004 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.2-RELEASE #0: Tue Apr 6 13:49:36 EEST 2004 > [EMAIL PROTECTED]:/usr/src/sys/i386/compile/HAY > Preloaded elf kernel "/boot/kernel/kernel" at 0xc08a6000. > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08a621c. > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: AMD Athlon(tm) Processor (1210.79-MHz 686-class CPU) > Origin = "AuthenticAMD" Id = 0x642 Stepping = 2 > > Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> > AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!> > real memory = 268353536 (255 MB) > avail memory = 251039744 (239 MB) > Pentium Pro MTRR support enabled > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <ASUS A7V-133 > on motherboard > pcibios: BIOS version 2.10 > Using $PIR table, 9 entries at 0xc00f1750 > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 > acpi_cpu0: <CPU> on acpi0 > acpi_button0: <Power Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib0: slot 4 INTD is routed to irq 9 > pcib0: slot 4 INTD is routed to irq 9 > pcib0: slot 12 INTA is routed to irq 11 > agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 0xe6000000-0xe7ffffff at > device 0.0 on pci0 > pcib1: <PCI-PCI bridge> at device 1.0 on pci0 > pci1: <PCI bus> on pcib1 > isab0: <PCI-ISA bridge> at device 4.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <VIA 82C686B UDMA100 controller> port 0xd800-0xd80f at device 4.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata0: [MPSAFE] > ata1: at 0x170 irq 15 on atapci0 > ata1: [MPSAFE] > uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 9 at device 4.2 on pci0 > usb0: <VIA 83C572 USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 9 at device 4.3 on pci0 > usb1: <VIA 83C572 USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > pci0: <bridge, PCI-unknown> at device 4.4 (no driver attached) > pcm0: <AudioPCI ES1373-B> port 0xa400-0xa43f at device 9.0 on pci0 > pcm0: <SigmaTel STAC9721/23 AC97 Codec> > pcib0: slot 9 INTA is routed to irq 9 > pci0: <simple comms> at device 10.0 (no driver attached) > dc0: <Macronix 98715AEC-C 10/100BaseTX> port 0x9800-0x98ff mem 0xe5000000-0xe50000ff > at device 11.0 on pci0 > pcib0: slot 11 INTA is routed to irq 10 > dc0: Ethernet address: 00:e0:4c:a0:b1:5d > miibus0: <MII bus> on dc0 > dcphy0: <Intel 21143 NWAY media interface> on miibus0 > dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > pci0: <display, VGA> at device 12.0 (no driver attached) > fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 > irq 6 drq 2 on acpi0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/8 bytes threshold > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > sio0 port 0x3f8-0x3ff irq 4 on acpi0 > sio0: type 16550A > sio1 port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse, device ID 3 > orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 > pmtimer0 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounter "TSC" frequency 1210791134 Hz quality 800 > Timecounters tick every 10.000 msec > acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0% > ad0: FAILURE - SET_MULTI status=51<READY,DSC,ERROR> error=4<ABORTED> > GEOM: create disk ad0 dp=0xc2df2260 > ad0: 19470MB <QUANTUM FIREBALLlct20 20> [39560/16/63] at ata0-master UDMA100 > GEOM: create disk ad1 dp=0xc2d92e60 > ad1: 76319MB <ST380011A> [155061/16/63] at ata0-slave UDMA100 > acd0: CDROM <ASUS CD-S500/A> at ata1-slave PIO4 > Mounting root from ufs:/dev/ad1s2a > dc0: watchdog timeout > dc0: watchdog timeout > dc0: watchdog timeout > dc0: watchdog timeout > dc0: watchdog timeout > dc0: watchdog timeout > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > Liste arsivi: http://lists.enderunix.org ve > http://www.mail-archive.com/[EMAIL PROTECTED] > http://ipucu.EnderUNIX.org - ihtiyac duyacaginiz kisa bilgiler bu sitede! -- Ismail YENIGUL http://www.acikkod.com - Acikkod Yayinlari http://www.EnderUNIX.org GnuPG Key: http://yenigul.net/ismail.gpg Authorization for a project will be granted only when none of the authorizers can be blamed if the project fails but when all of the authorizers can claim credit if it succeeds. --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Liste arsivi: http://lists.enderunix.org ve http://www.mail-archive.com/[EMAIL PROTECTED] http://ipucu.EnderUNIX.org - ihtiyac duyacaginiz kisa bilgiler bu sitede!
