Merhaba
 
tam olarak anlayamadım. ufak bir örnekle anlatabilirmisiniz..
 
Teşekkürler..
----- Original Message -----
Sent: Friday, February 17, 2006 5:21 PM
Subject: RE: [FreeBSD] vpn portu

Merhaba Ahmet bey,

 

Port olarak VPN sunucuya dogru acmaniz ok, ancak, VPN clientlar da source port olarak onu kullanacakmis gibi yazmissiniz, VPN clientlar, gelenler icin port any deyip tekrar deneyebilir misiniz?

 

İyi calismalar,

 

Metin Paşaoğlu

Security Expert

Bilgi Güvenlik

Tel      : +90 232 4697063
Fax     : +90 232 4697064

www.bilgiguvenlik.com

 

 


From: Ahmet ORHAN [mailto:[EMAIL PROTECTED]
Sent: Friday, February 17, 2006 5:12 PM
To: [email protected]
Subject: Re: [FreeBSD] vpn portu

 

merhaba

 

aşağıdaki gibi bir vpn port yönlendirmesi yaptım ancak çalışmıyor :(

 

Teşekkürler..

 

rdr fxp1 0.0.0.0/0 port 500 -> 192.168.0.12 port 500
rdr fxp1 0.0.0.0/0 port 5500 -> 192.168.0.12 port 5500
rdr fxp1 0.0.0.0/0 port 1701 -> 192.168.0.12 port 1701
rdr fxp1 0.0.0.0/0 port 47 -> 192.168.0.12 port 47
rdr fxp1 0.0.0.0/0 port 1723 -> 192.168.0.12 port 1723

 

----- Original Message -----

Sent: Thursday, February 16, 2006 5:48 PM

Subject: RE: [FreeBSD] vpn portu

 

Merhaba Ahmet bey,

 

VPN ile ilgili su bilgi işinizi görecektir sanırım.

 

To enable VPN tunnels between individual host computers or entire networks that have a firewall between them, you must open the following ports:

PPTP

  • To allow PPTP tunnel maintenance traffic, open TCP 1723.
  • To allow PPTP tunneled data to pass through router, open Protocol ID 47.

L2TP over IPSec

  • To allow Internet Key Exchange (IKE), open UDP 500.
  • To allow IPSec Network Address Translation (NAT-T) open UDP 5500.
  • To allow L2TP traffic, open UDP 1701.

Ayrıca VPN server icin static NAT yapin.

İyi çalışmalar,

 

 

Metin Paşaoğlu

Security Expert

Bilgi Güvenlik

Tel      : +90 232 4697063
Fax     : +90 232 4697064

www.bilgiguvenlik.com

 

 


From: Ahmet ORHAN [mailto:[EMAIL PROTECTED]
Sent: Thursday, February 16, 2006 4:11 PM
To: [email protected]
Subject: [FreeBSD] vpn portu

 

Merhaba arkadaşlar

 

şöyle bir sanaryo söz konusu..

 

firewall olarak freebsd kullanıyorum. firewall arkasında da Windows 2003 vpn server kurulu..  VPN portlarını freebsd üzerinden Windows server yüklü bilgisayara yönlendirmem lazım. ipfilter ve ipnat kullanıyorum. vpn için hangi portları yönlerdimem lazım?

 

Not: uzak masaüstü portu yönlendirmesi çalışıyor..

 

 

 


AHMET ORHAN
Bilgi İşlem
ALTINBASAK TEKSTİL. A.Ş.
www.altinbasak.com
[EMAIL PROTECTED]
0 258 269 10 69

 

 



__________ NOD32 1.1411 (20060216) Information __________

This message was checked by NOD32 antivirus system.
http://www.eset.com



__________ NOD32 1.1413 (20060217) Information __________

This message was checked by NOD32 antivirus system.
http://www.eset.com

Cevap