On Fri, Jul 7, 2017 at 5:59 PM, Eugene Grosbein <eu...@grosbein.net> wrote: >> >>> Что было непонятно в совете смотреть в логи spamass-milter >> >>> и почему он проигнорирован? >> >>> >> >> Я не игнорировал. Там ничего нет. Отдельных логов этого мильтера нет. >> >> В maillog и messages тоже ничего. >> >> grep spamass /var/log/maillog >> >> Jul 7 12:07:52 rmaile spamass-milter[16423]: spamass-milter 0.4.0 >> >> starting >> >> >> >> и все >> >> Как и где заставить его писать отдельный подробный лог я пока просто не >> >> нашел. >> > >> > Про это написано в man spamass-milter, но проблема тут, похоже, >> > вовсе не в нём, а в сломанной базовой системе из-за freebsd-update. >> > >> > dmesg -a в студию. >> > >> > >> Copyright (c) 1992-2016 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >> The Regents of the University of California. All rights reserved. >> FreeBSD is a registered trademark of The FreeBSD Foundation. >> FreeBSD 10.3-RELEASE #0 r297264: Fri Mar 25 03:51:29 UTC 2016 >> r...@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC i386 >> FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 >> CPU: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz (2926.06-MHz 686-class >> CPU) >> Origin="GenuineIntel" Id=0x1067a Family=0x6 Model=0x17 Stepping=10 >> >> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> >> >> Features2=0xc08e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,OSXSAVE> >> AMD Features=0x20100000<NX,LM> >> AMD Features2=0x1<LAHF> >> VT-x: (disabled in BIOS) HLT,PAUSE >> TSC: P-state invariant, performance statistics >> real memory = 4294967296 (4096 MB) >> avail memory = 3399380992 (3241 MB) >> Event timer "LAPIC" quality 400 >> ACPI APIC Table: <PTLTD APIC > >> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs >> FreeBSD/SMP: 1 package(s) x 2 core(s) >> cpu0 (BSP): APIC ID: 0 >> cpu1 (AP): APIC ID: 1 >> random: <Software, Yarrow> initialized >> ioapic0 <Version 2.0> irqs 0-23 on motherboard >> kbd1 at kbdmux0 >> acpi0: <PTLTD XSDT> on motherboard >> acpi0: Power Button (fixed) >> cpu0: <ACPI CPU> on acpi0 >> cpu1: <ACPI CPU> on acpi0 >> atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 >> Event timer "RTC" frequency 32768 Hz quality 0 >> attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 >> Timecounter "i8254" frequency 1193182 Hz quality 0 >> Event timer "i8254" frequency 1193182 Hz quality 100 >> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 >> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 >> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >> pci0: <ACPI PCI bus> on pcib0 >> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 >> pci1: <ACPI PCI bus> on pcib1 >> mpt0: <LSILogic SAS/SATA Adapter> port 0x2000-0x20ff mem >> 0xde110000-0xde113fff,0xde100000-0xde10ffff irq 16 at device 0.0 on >> pci1 >> mpt0: MPI Version=1.5.18.0 >> uhci0: <Intel 82801I (ICH9) USB controller> port 0x1820-0x183f irq 16 >> at device 26.0 on pci0 >> usbus0 on uhci0 >> uhci1: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 17 >> at device 26.1 on pci0 >> usbus1 on uhci1 >> uhci2: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 18 >> at device 26.2 on pci0 >> usbus2 on uhci2 >> ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem >> 0xde000000-0xde0003ff irq 18 at device 26.7 on pci0 >> usbus3: EHCI version 1.0 >> usbus3 on ehci0 >> pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 >> pci5: <ACPI PCI bus> on pcib2 >> pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 >> pci13: <ACPI PCI bus> on pcib3 >> em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x3000-0x301f >> mem 0xde220000-0xde23ffff,0xde200000-0xde203fff irq 16 at device 0.0 >> on pci13 >> em0: Using MSIX interrupts with 3 vectors >> em0: Ethernet address: 00:30:48:b8:3a:16 >> pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 >> pci15: <ACPI PCI bus> on pcib4 >> em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x4000-0x401f >> mem 0xde320000-0xde33ffff,0xde300000-0xde303fff irq 17 at device 0.0 >> on pci15 >> em1: Using MSIX interrupts with 3 vectors >> em1: Ethernet address: 00:30:48:b8:3a:17 >> uhci3: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 23 >> at device 29.0 on pci0 >> usbus4 on uhci3 >> uhci4: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 22 >> at device 29.1 on pci0 >> usbus5 on uhci4 >> uhci5: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 21 >> at device 29.2 on pci0 >> usbus6 on uhci5 >> ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem >> 0xde000400-0xde0007ff irq 23 at device 29.7 on pci0 >> usbus7: EHCI version 1.0 >> usbus7 on ehci1 >> pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 >> pci17: <ACPI PCI bus> on pcib5 >> vgapci0: <VGA-compatible display> mem >> 0xdf800000-0xdfffffff,0xde400000-0xde403fff,0xde800000-0xdeffffff irq >> 22 at device 3.0 on pci17 >> vgapci0: Boot video device >> isab0: <PCI-ISA bridge> at device 31.0 on pci0 >> isa0: <ISA bus> on isab0 >> ahci0: <Intel ICH9 AHCI SATA controller> port >> 0x1c50-0x1c57,0x1c44-0x1c47,0x1c48-0x1c4f,0x1c40-0x1c43,0x18e0-0x18ff >> mem 0xde000800-0xde000fff irq 17 at device 31.2 on pci0 >> ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier supported >> ahcich0: <AHCI channel> at channel 0 on ahci0 >> ahcich1: <AHCI channel> at channel 1 on ahci0 >> ahcich4: <AHCI channel> at channel 4 on ahci0 >> ahcich5: <AHCI channel> at channel 5 on ahci0 >> ahciem0: <AHCI enclosure management bridge> on ahci0 >> acpi_button0: <Power Button> on acpi0 >> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 >> atkbd0: <AT Keyboard> irq 1 on atkbdc0 >> kbd0 at atkbd0 >> atkbd0: [GIANT-LOCKED] >> psm0: <PS/2 Mouse> irq 12 on atkbdc0 >> psm0: [GIANT-LOCKED] >> psm0: model IntelliMouse Explorer, device ID 4 >> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 >> uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 >> uart2: <16550 or compatible> port 0x220-0x227 irq 5 on acpi0 >> pmtimer0 on isa0 >> orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcd7ff pnpid >> ORM0000 on isa0 >> sc0: <System console> at flags 0x100 on isa0 >> sc0: VGA <16 virtual consoles, flags=0x300> >> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >> ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 >> ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0 >> ppc0: parallel port not found. >> est0: <Enhanced SpeedStep Frequency Control> on cpu0 >> est1: <Enhanced SpeedStep Frequency Control> on cpu1 >> Timecounters tick every 1.000 msec >> random: unblocking device. >> usbus0: 12Mbps Full Speed USB v1.0 >> usbus1: 12Mbps Full Speed USB v1.0 >> usbus2: 12Mbps Full Speed USB v1.0 >> usbus3: 480Mbps High Speed USB v2.0 >> usbus4: 12Mbps Full Speed USB v1.0 >> usbus5: 12Mbps Full Speed USB v1.0 >> usbus6: 12Mbps Full Speed USB v1.0 >> usbus7: 480Mbps High Speed USB v2.0 >> ugen1.1: <Intel> at usbus1 >> uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 >> ugen4.1: <Intel> at usbus4 >> uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 >> ugen3.1: <Intel> at usbus3 >> uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 >> ugen2.1: <Intel> at usbus2 >> uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 >> ugen0.1: <Intel> at usbus0 >> uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 >> ugen6.1: <Intel> at usbus6 >> uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 >> ugen5.1: <Intel> at usbus5 >> uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 >> ugen7.1: <Intel> at usbus7 >> uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 >> ses0 at ahciem0 bus 0 scbus5 target 0 lun 0 >> ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device >> ses0: SEMB SES Device >> da0 at mpt0 bus 0 scbus0 target 0 lun 0 >> da0: <SEAGATE ST3146356SS 0007> Fixed Direct Access SPC-3 SCSI device >> da0: Serial Number 3QN4PS12000091308B4X >> da0: 300.000MB/s transfers >> da0: Command Queueing enabled >> da0: 140014MB (286749488 512 byte sectors) >> da1 at mpt0 bus 0 scbus0 target 2 lun 0 >> da1: <SEAGATE ST3146356SS 0007> Fixed Direct Access SPC-3 SCSI device >> da1: Serial Number 3QN4PRJ700009130H22J >> da1: 300.000MB/s transfers >> da1: Command Queueing enabled >> da1: 140014MB (286749488 512 byte sectors) >> GEOM: da0: the secondary GPT table is corrupt or invalid. >> GEOM: da0: using the primary only -- recovery suggested. >> GEOM: da1: the secondary GPT table is corrupt or invalid. >> GEOM: da1: using the primary only -- recovery suggested. >> SMP: AP CPU #1 Launched! >> GEOM: diskid/DISK-3QN4PS12000091308B4X: the secondary GPT table is >> corrupt or invalid. >> GEOM: diskid/DISK-3QN4PS12000091308B4X: using the primary only -- >> recovery suggested. >> uhub1: 2 ports with 2 removable, self powered >> uhub4: 2 ports with 2 removable, self powered >> uhub0: 2 ports with 2 removable, self powered >> uhub3: 2 ports with 2 removable, self powered >> uhub6: 2 ports with 2 removable, self powered >> uhub5: 2 ports with 2 removable, self powered >> GEOM: diskid/DISK-3QN4PRJ700009130H22J: the secondary GPT table is >> corrupt or invalid. >> GEOM: diskid/DISK-3QN4PRJ700009130H22J: using the primary only -- >> recovery suggested. >> Root mount waiting for: usbus7 usbus3 >> Root mount waiting for: usbus7 usbus3 >> Root mount waiting for: usbus7 usbus3 >> uhub7: 6 ports with 6 removable, self powered >> uhub2: 6 ports with 6 removable, self powered >> Trying to mount root from ufs:/dev/da0p3 [rw]... >> Setting hostuuid: 53d1a494-d663-a0e7-890b-003048b83a16. >> Setting hostid: 0x539721fe. >> Entropy harvesting: interrupts ethernet point_to_point swi. >> Starting file system checks: >> /dev/da0p3: FILE SYSTEM CLEAN; SKIPPING CHECKS >> /dev/da0p3: clean, 2450808 free (600 frags, 306276 blocks, 0.0% >> fragmentation) >> /dev/da0p4: FILE SYSTEM CLEAN; SKIPPING CHECKS >> /dev/da0p4: clean, 6544551 free (11007 frags, 816693 blocks, 0.1% >> fragmentation) >> /dev/da0p5: FILE SYSTEM CLEAN; SKIPPING CHECKS >> /dev/da0p5: clean, 5066564 free (236 frags, 633291 blocks, 0.0% >> fragmentation) >> /dev/da0p6: FILE SYSTEM CLEAN; SKIPPING CHECKS >> /dev/da0p6: clean, 7241671 free (21815 frags, 902482 blocks, 0.3% >> fragmentation) >> /dev/da0p7: FILE SYSTEM CLEAN; SKIPPING CHECKS >> /dev/da0p7: clean, 4955180 free (132 frags, 619381 blocks, 0.0% >> fragmentation) >> Mounting local file systems:. >> Writing entropy file:. >> Setting hostname: rmaile.iop.kiev.ua. >> ugen2.2: <American Megatrends Inc.> at usbus2 >> ukbd0: <Keyboard Interface> on usbus2 >> kbd2 at ukbd0 >> em0: link state changed to UP >> Starting Network: lo0 em0 em1. >> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 >> options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> >> inet6 ::1 prefixlen 128 >> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 >> inet 127.0.0.1 netmask 0xff000000 >> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> >> em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 >> >> options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO> >> ether 00:30:48:b8:3a:16 >> inet 194.44.164.164 netmask 0xfffffff0 broadcast 194.44.164.175 >> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> >> media: Ethernet autoselect (100baseTX <full-duplex>) >> status: active >> em1: flags=8c02<BROADCAST,OACTIVE,SIMPLEX,MULTICAST> metric 0 mtu 1500 >> >> options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO> >> ether 00:30:48:b8:3a:17 >> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> >> media: Ethernet autoselect >> status: no carrier >> Starting devd. >> Starting Network: em1. >> em1: flags=8c02<BROADCAST,OACTIVE,SIMPLEX,MULTICAST> metric 0 mtu 1500 >> >> options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO> >> ether 00:30:48:b8:3a:17 >> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> >> media: Ethernet autoselect >> status: no carrier >> ums0: <Mouse Interface> on usbus2 >> add net default: gateway 194.44.164.161 >> add net fe80::: gateway ::1 >> add net ff02::: gateway ::1 >> add net ::ffff:0.0.0.0: gateway ::1 >> add net ::0.0.0.0: gateway ::1 >> ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib >> /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg >> /usr/local/lib/gcc48 /usr/local/lib/perl5/5.18/mach/CORE >> /usr/local/lib/perl5/5.20/mach/CORE /usr/local/llvm36/lib >> a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout >> Creating and/or trimming log files. >> Starting syslogd. >> Clearing /tmp (X related). >> Starting xinetd. >> Updating motd:. >> Mounting late file systems:. >> Starting spamass_milter. >> chown: /var/run/spamass-milter.sock: No such file or directory >> chmod: /var/run/spamass-milter.sock: No such file or directory >> Starting saslauthd. >> Starting spamd. >> Starting clamav_clamd. >> Waiting for clamd socket.. >> Starting clamav_milter. >> Waiting for clamav-milter socket.. >> Starting clamav_freshclam. >> Configuring syscons: blanktime. >> Performing sanity check on sshd configuration. >> Starting sshd. >> Starting sendmail. >> Warning: Option: AuthMechanisms requires SASL support (-DSASL) >> WARNING: Xspamassassin: local socket name /var/run/spamass-milter.sock >> missing >> Starting sendmail_msp_queue. >> Starting cron. >> Starting background file system checks in 60 seconds. > > Просьба отвечать не лично, а в рассылку. > > Ещё надо: > > uname -K > uname -U uname -K 1003000 uname -U 1001000
-- Regards, Andrii Dobrovol`s`kyj _______________________________________________ freebsd mailing list freebsd@uafug.org.ua http://mailman.uafug.org.ua/mailman/listinfo/freebsd