I've had no MAC addresses but with prodding and rebooting they reappeared. I am not sure what helped. Also - http://lists.alioth.debian.org/pipermail/freedombox-discuss/2012-November/004822.html
Nick Hardiman n...@internetmachines.co.uk @intmachines On 27 Mar 2013, at 22:00, Craig Barnes <cjbarne...@gmail.com> wrote: > Hi all, > > Have just tried loading the weekly image onto my plug, I've had this > difficulty on earlier images but have not had the time to dig into it > until now. > > following successful boot the ethernet ports are not functioning. > They where working with the original image, I havnt attempted to > reload that image yet. > > I believe it is an earlier version device (0802) but the way to > determine this is not entirely clear. > > The following output from ip link with one of the ports connected to my > switch. > > root@freedombox:~# ip link > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN mode > DEFAULT > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > 2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode > DEFAULT qlen 1000 > link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff > 3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode > DEFAULT qlen 1000 > link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff > > googling the module (mv643xx_eth) hasn't shed any light on this either. > > At the moment my only access to the os is via the JTAG. > > Any suggestions on this would be much appreciated. > > -- > Craig > > _______________________________________________ > Freedombox-discuss mailing list > Freedombox-discuss@lists.alioth.debian.org > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/freedombox-discuss
_______________________________________________ Freedombox-discuss mailing list Freedombox-discuss@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/freedombox-discuss