Hello, A quick update as I am currently testing the freedombox image for olinuxino A20 from Sunil and can also confirm it works out of the box.
The freedombox can be accessed by browsing to https://freedombox/ if the olinuxino ethernet is plugged in. I have configured it as an access point using the MOD-WIFI-R5370-ANT adapter. The wifi was detected automatically and the freedombox can be confiured as an access point from within pllinth. I did add contrib and non-free to the sources.lis,) but I am not sure this was even necessary as it was already recognized. I use the following settings: Firewall Zone: Internal SSID: MyFreedomBox Mode: Access Point Authentication Mode: WPA Passphrase: mysecretpassphrase IPv4 Addressing Method: Shared *Some random notes:* - Once the wifi is activated, you can access the freedombox by browsing to https://10.42.0.1/. (The IP address from the ethernet port also still works, but https://freedombox/ does not work anymore) - Speed and range of the olinuxino + usb wifi antenna are great. Better than expected. - I tried adding a second connection on the same wifi module, but this deactivated the other configured connection. Would have been nice to be able to have multiple SSID's for a separate guest and a TOR network. I think I've seen this working with yunohost a while ago. @Sunil: Many thanks for your work!
_______________________________________________ Freedombox-discuss mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/freedombox-discuss
