On Thursday 19 April 2018 01:15 AM, Chandan Uddaraju wrote:
For dual dsi mode, the horizontal timing needs
to be divided by half since both the dsi controllers
will be driving this panel. Adjust the pixel clock and
DSI timing accordingly.

Reviewed-by: Archit Taneja <arch...@codeaurora.org>


Changes in V2:
--Removed Change-Id from the commit text tags.

Changes in V3:
--Instead of adjusting the DRM mode structure, divide
   the clocks and horizontal timings in DSI host just
   before configuring the values.

Signed-off-by: Chandan Uddaraju <chand...@codeaurora.org>
---
  drivers/gpu/drm/msm/dsi/dsi.h         |  6 ++--
  drivers/gpu/drm/msm/dsi/dsi_host.c    | 55 ++++++++++++++++++++++++++++-------
  drivers/gpu/drm/msm/dsi/dsi_manager.c |  7 +++--
  3 files changed, 52 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h
index 70d9a9a..01c38f6 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.h
+++ b/drivers/gpu/drm/msm/dsi/dsi.h
@@ -162,7 +162,8 @@ void msm_dsi_host_cmd_xfer_commit(struct mipi_dsi_host 
*host,
  int msm_dsi_host_enable(struct mipi_dsi_host *host);
  int msm_dsi_host_disable(struct mipi_dsi_host *host);
  int msm_dsi_host_power_on(struct mipi_dsi_host *host,
-                       struct msm_dsi_phy_shared_timings *phy_shared_timings);
+                       struct msm_dsi_phy_shared_timings *phy_shared_timings,
+                       bool is_dual_dsi);
  int msm_dsi_host_power_off(struct mipi_dsi_host *host);
  int msm_dsi_host_set_display_mode(struct mipi_dsi_host *host,
                                        struct drm_display_mode *mode);
@@ -175,7 +176,8 @@ int msm_dsi_host_set_src_pll(struct mipi_dsi_host *host,
                        struct msm_dsi_pll *src_pll);
  void msm_dsi_host_reset_phy(struct mipi_dsi_host *host);
  void msm_dsi_host_get_phy_clk_req(struct mipi_dsi_host *host,
-       struct msm_dsi_phy_clk_request *clk_req);
+       struct msm_dsi_phy_clk_request *clk_req,
+       bool is_dual_dsi);
  void msm_dsi_host_destroy(struct mipi_dsi_host *host);
  int msm_dsi_host_modeset_init(struct mipi_dsi_host *host,
                                        struct drm_device *dev);
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c 
b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 7a03a94..75d527e 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -118,6 +118,7 @@ struct msm_dsi_host {
        struct clk *byte_intf_clk;
u32 byte_clk_rate;
+       u32 pixel_clk_rate;
        u32 esc_clk_rate;
/* DSI v2 specific clocks */
@@ -510,7 +511,7 @@ static int dsi_link_clk_enable_6g(struct msm_dsi_host 
*msm_host)
                goto error;
        }
- ret = clk_set_rate(msm_host->pixel_clk, msm_host->mode->clock * 1000);
+       ret = clk_set_rate(msm_host->pixel_clk, msm_host->pixel_clk_rate);
        if (ret) {
                pr_err("%s: Failed to set rate pixel clk, %d\n", __func__, ret);
                goto error;
@@ -591,7 +592,7 @@ static int dsi_link_clk_enable_v2(struct msm_dsi_host 
*msm_host)
                goto error;
        }
- ret = clk_set_rate(msm_host->pixel_clk, msm_host->mode->clock * 1000);
+       ret = clk_set_rate(msm_host->pixel_clk, msm_host->pixel_clk_rate);
        if (ret) {
                pr_err("%s: Failed to set rate pixel clk, %d\n", __func__, ret);
                goto error;
@@ -661,7 +662,7 @@ static void dsi_link_clk_disable(struct msm_dsi_host 
*msm_host)
        }
  }
-static int dsi_calc_clk_rate(struct msm_dsi_host *msm_host)
+static int dsi_calc_clk_rate(struct msm_dsi_host *msm_host, bool is_dual_dsi)
  {
        struct drm_display_mode *mode = msm_host->mode;
        const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
@@ -675,14 +676,28 @@ static int dsi_calc_clk_rate(struct msm_dsi_host 
*msm_host)
        }
pclk_rate = mode->clock * 1000;
+
+       /*
+        * For dual DSI mode, the current DRM mode has
+        * the complete width of the panel. Since, the complete
+        * panel is driven by two DSI controllers, the
+        * the clock rates have to be split between
+        * the two dsi controllers. Adjust the byte and
+        * pixel clock rates for each dsi host accordingly.
+        */
+       if (is_dual_dsi)
+               pclk_rate /= 2;
+
        if (lanes > 0) {
                msm_host->byte_clk_rate = (pclk_rate * bpp) / (8 * lanes);
        } else {
                pr_err("%s: forcing mdss_dsi lanes to 1\n", __func__);
                msm_host->byte_clk_rate = (pclk_rate * bpp) / 8;
        }
+       msm_host->pixel_clk_rate = pclk_rate;
- DBG("pclk=%d, bclk=%d", pclk_rate, msm_host->byte_clk_rate);
+       DBG("pclk=%d, bclk=%d", msm_host->pixel_clk_rate,
+                               msm_host->byte_clk_rate);
msm_host->esc_clk_rate = clk_get_rate(msm_host->esc_clk); @@ -884,7 +899,7 @@ static void dsi_ctrl_config(struct msm_dsi_host *msm_host, bool enable,
        dsi_write(msm_host, REG_DSI_CTRL, data);
  }
-static void dsi_timing_setup(struct msm_dsi_host *msm_host)
+static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_dual_dsi)
  {
        struct drm_display_mode *mode = msm_host->mode;
        u32 hs_start = 0, vs_start = 0; /* take sync start as 0 */
@@ -896,10 +911,26 @@ static void dsi_timing_setup(struct msm_dsi_host 
*msm_host)
        u32 ha_end = ha_start + mode->hdisplay;
        u32 va_start = v_total - mode->vsync_start;
        u32 va_end = va_start + mode->vdisplay;
+       u32 hdisplay = mode->hdisplay;
        u32 wc;
DBG(""); + /*
+        * For dual DSI mode, the current DRM mode has
+        * the complete width of the panel. Since, the complete
+        * panel is driven by two DSI controllers, the horizontal
+        * timings have to be split between the two dsi controllers.
+        * Adjust the DSI host timing values accordingly.
+        */
+       if (is_dual_dsi) {
+               h_total /= 2;
+               hs_end /= 2;
+               ha_start /= 2;
+               ha_end /= 2;
+               hdisplay /= 2;
+       }
+
        if (msm_host->mode_flags & MIPI_DSI_MODE_VIDEO) {
                dsi_write(msm_host, REG_DSI_ACTIVE_H,
                        DSI_ACTIVE_H_START(ha_start) |
@@ -920,7 +951,7 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host)
                        DSI_ACTIVE_VSYNC_VPOS_END(vs_end));
        } else {                /* command mode */
                /* image data and 1 byte write_memory_start cmd */
-               wc = mode->hdisplay * dsi_get_bpp(msm_host->format) / 8 + 1;
+               wc = hdisplay * dsi_get_bpp(msm_host->format) / 8 + 1;
dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM_CTRL,
                        DSI_CMD_MDP_STREAM_CTRL_WORD_COUNT(wc) |
@@ -930,7 +961,7 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host)
                                        MIPI_DSI_DCS_LONG_WRITE));
dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM_TOTAL,
-                       DSI_CMD_MDP_STREAM_TOTAL_H_TOTAL(mode->hdisplay) |
+                       DSI_CMD_MDP_STREAM_TOTAL_H_TOTAL(hdisplay) |
                        DSI_CMD_MDP_STREAM_TOTAL_V_TOTAL(mode->vdisplay));
        }
  }
@@ -2172,12 +2203,13 @@ void msm_dsi_host_reset_phy(struct mipi_dsi_host *host)
  }
void msm_dsi_host_get_phy_clk_req(struct mipi_dsi_host *host,
-       struct msm_dsi_phy_clk_request *clk_req)
+                       struct msm_dsi_phy_clk_request *clk_req,
+                       bool is_dual_dsi)
  {
        struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
        int ret;
- ret = dsi_calc_clk_rate(msm_host);
+       ret = dsi_calc_clk_rate(msm_host, is_dual_dsi);
        if (ret) {
                pr_err("%s: unable to calc clk rate, %d\n", __func__, ret);
                return;
@@ -2238,7 +2270,8 @@ static void msm_dsi_sfpb_config(struct msm_dsi_host 
*msm_host, bool enable)
  }
int msm_dsi_host_power_on(struct mipi_dsi_host *host,
-                       struct msm_dsi_phy_shared_timings *phy_shared_timings)
+                       struct msm_dsi_phy_shared_timings *phy_shared_timings,
+                       bool is_dual_dsi)
  {
        struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
        int ret = 0;
@@ -2273,7 +2306,7 @@ int msm_dsi_host_power_on(struct mipi_dsi_host *host,
                goto fail_disable_clk;
        }
- dsi_timing_setup(msm_host);
+       dsi_timing_setup(msm_host, is_dual_dsi);
        dsi_sw_reset(msm_host);
        dsi_ctrl_config(msm_host, true, phy_shared_timings);
diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c
index 4cb1cb6..3bb506b 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_manager.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c
@@ -134,8 +134,9 @@ static int enable_phy(struct msm_dsi *msm_dsi, int 
src_pll_id,
  {
        struct msm_dsi_phy_clk_request clk_req;
        int ret;
+       bool is_dual_dsi = IS_DUAL_DSI();
- msm_dsi_host_get_phy_clk_req(msm_dsi->host, &clk_req);
+       msm_dsi_host_get_phy_clk_req(msm_dsi->host, &clk_req, is_dual_dsi);
ret = msm_dsi_phy_enable(msm_dsi->phy, src_pll_id, &clk_req);
        msm_dsi_phy_get_shared_timings(msm_dsi->phy, shared_timings);
@@ -458,7 +459,7 @@ static void dsi_mgr_bridge_pre_enable(struct drm_bridge 
*bridge)
        if (is_dual_dsi && (DSI_1 == id))
                return;
- ret = msm_dsi_host_power_on(host, &phy_shared_timings[id]);
+       ret = msm_dsi_host_power_on(host, &phy_shared_timings[id], is_dual_dsi);
        if (ret) {
                pr_err("%s: power on host %d failed, %d\n", __func__, id, ret);
                goto host_on_fail;
@@ -466,7 +467,7 @@ static void dsi_mgr_bridge_pre_enable(struct drm_bridge 
*bridge)
if (is_dual_dsi && msm_dsi1) {
                ret = msm_dsi_host_power_on(msm_dsi1->host,
-                                           &phy_shared_timings[DSI_1]);
+                               &phy_shared_timings[DSI_1], is_dual_dsi);
                if (ret) {
                        pr_err("%s: power on host1 failed, %d\n",
                                                        __func__, ret);

_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

Reply via email to