On Wed, Mar 25, 2020 at 1:17 AM Kalyan Thota <kalya...@codeaurora.org> wrote: > > This change adds support to configure dspp blocks in > the dpu driver. > > Macro description of the changes coming in this patch. > 1) Add dspp definitions in the hw catalog. > 2) Add capability to reserve dspp blocks in the display data path. > 3) Attach the reserved block to the encoder. > > Signed-off-by: Kalyan Thota <kalya...@codeaurora.org>
Hey all, With this patch now merged upstream, I'm seeing a regression on db845c that I bisected down to it. When I boot up I see: [ 40.976737] [drm:_dpu_rm_check_lm_and_get_connected_blks] [dpu error]failed to get dspp on lm 0 [ 40.985600] [drm:_dpu_rm_check_lm_and_get_connected_blks] [dpu error]failed to get dspp on lm 0 [ 40.994587] [drm:_dpu_rm_check_lm_and_get_connected_blks] [dpu error]failed to get dspp on lm 0 [ 41.003492] [drm:_dpu_rm_check_lm_and_get_connected_blks] [dpu error]failed to get dspp on lm 0 [ 41.012283] [drm:_dpu_rm_make_reservation] [dpu error]unable to find appropriate mixers [ 41.020369] [drm:dpu_rm_reserve] [dpu error]failed to reserve hw resources: -119 Over and over, and the display doesn't start up. I suspect we're supposed to catch the following check before the failure: + if (!reqs->topology.num_dspp) + return true; I suspect the issue is in dpu_encoder_get_topology() we don't fully initialize the topology structure on the stack before returning it. Does that sound plausible or is there likely some other cause? thanks -john _______________________________________________ Freedreno mailing list Freedreno@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/freedreno