On Fri, 21 May 2021 15:57:21 +0530, Krishna Manikandan wrote: > MSM Mobile Display Subsystem (MDSS) encapsulates sub-blocks > like DPU display controller, DSI etc. Add YAML schema > for DPU device tree bindings. > > Signed-off-by: Krishna Manikandan <mkri...@codeaurora.org> > > Changes in v2: > - Changed dpu to DPU (Sam Ravnborg) > - Fixed indentation issues (Sam Ravnborg) > - Added empty line between different properties (Sam Ravnborg) > - Replaced reference txt files with their corresponding > yaml files (Sam Ravnborg) > - Modified the file to use "|" only when it is > necessary (Sam Ravnborg) > > Changes in v3: > - Corrected the license used (Rob Herring) > - Added maxItems for properties (Rob Herring) > - Dropped generic descriptions (Rob Herring) > - Added ranges property (Rob Herring) > - Corrected the indendation (Rob Herring) > - Added additionalProperties (Rob Herring) > - Split dsi file into two, one for dsi controller > and another one for dsi phy per target (Rob Herring) > - Corrected description for pinctrl-names (Rob Herring) > - Corrected the examples used in yaml file (Rob Herring) > - Delete dsi.txt and dpu.txt (Rob Herring) > > Changes in v4: > - Move schema up by one level (Rob Herring) > - Add patternProperties for mdp node (Rob Herring) > - Corrected description of some properties (Rob Herring) > > Changes in v5: > - Correct the indentation (Rob Herring) > - Remove unnecessary description from properties (Rob Herring) > - Correct the number of interconnect entries (Rob Herring) > - Add interconnect names for sc7180 (Rob Herring) > - Add description for ports (Rob Herring) > - Remove common properties (Rob Herring) > - Add unevalutatedProperties (Rob Herring) > - Reference existing dsi controller yaml in the common > dsi controller file (Rob Herring) > - Correct the description of clock names to include only the > clocks that are required (Rob Herring) > - Remove properties which are already covered under the common > binding (Rob Herring) > - Add dsi phy supply nodes which are required for sc7180 and > sdm845 targets (Rob Herring) > - Add type ref for syscon-sfpb (Rob Herring) > > Changes in v6: > - Fixed errors during dt_binding_check (Rob Herring) > - Add maxItems for phys and phys-names (Rob Herring) > - Use unevaluatedProperties wherever required (Rob Herring) > - Removed interrupt controller from required properties for > dsi controller (Rob Herring) > - Add constraints for dsi-phy reg-names based on the compatible > phy version (Rob Herring) > - Add constraints for dsi-phy supply nodes based on the > compatible phy version (Rob Herring) > > Changes in v7: > - Add default value for qcom,mdss-mdp-transfer-time-us (Rob Herring) > - Modify the schema for data-lanes (Rob Herring) > - Split the phy schema into separate schemas based on > the phy version (Rob Herring) > > Changes in v8: > - Resolve merge conflicts with latest dsi.txt file > - Include dp yaml change also in the same series > > Changes in v9: > - Combine target specific dsi controller yaml files > to a single yaml file (Rob Herring) > - Combine target specific dsi phy yaml files into a > single yaml file (Rob Herring) > - Use unevaluatedProperties and additionalProperties > wherever required > - Remove duplicate properties from common yaml files > > Changes in v10: > - Split the patch into separate patches for DPU, DSI and > PHY (Stephen Boyd) > - Drop unnecessary fullstop (Stephen Boyd) > - Add newline whereever required (Stephen Boyd) > - Add description for clock used (Stephen Boyd) > - Modify the description for interconnect entries (Stephen Boyd) > - Drop assigned clock entries as it a generic property (Stephen Boyd) > - Correct the definition for interrupts (Stephen Boyd) > - Drop clock names from required properties (Stephen Boyd) > - Drop labels for display nodes from example (Stephen Boyd) > - Drop flags from interrupts entries (Stephen Boyd) > > Changes in v11: > - Drop maxItems for clocks (Stephen Boyd) > > Changes in v12: > - Add description for register property (Stephen Boyd) > - Add maxItems for interrupts (Stephen Boyd) > - Add description for iommus property (Stephen Boyd) > - Add description for interconnects (Stephen Boyd) > - Change display node name to display_controller (Stephen Boyd) > > Changes in v13: > - Add maxItems for reg property (Stephen Boyd) > - Add ranges property in example (Stephen Boyd) > - Modify description for iommus property (Stephen Boyd) > - Add Dp bindings for ports in the same patch (Stephen Boyd) > - Remove soc from examples and change address and size cells > accordingly (Stephen Boyd) > - Add reference for ports > > Changes in v14: > - Modify title for SC7180 and SDM845 yaml files (Stephen Boyd) > - Add required list for display-controller node (Stephen Boyd) > > Changes in v16: > - Add reference for port (Rob Herring) > - Make additionalProperties as false (Rob Herring) > --- > .../bindings/display/msm/dpu-sc7180.yaml | 228 > +++++++++++++++++++++ > .../bindings/display/msm/dpu-sdm845.yaml | 212 +++++++++++++++++++ > .../devicetree/bindings/display/msm/dpu.txt | 141 ------------- > 3 files changed, 440 insertions(+), 141 deletions(-) > create mode 100644 > Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml > create mode 100644 > Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml > delete mode 100644 Documentation/devicetree/bindings/display/msm/dpu.txt >
Please add Acked-by/Reviewed-by tags when posting new versions. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for acks received on the version they apply. If a tag was not added on purpose, please state why and what changed. _______________________________________________ Freedreno mailing list Freedreno@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/freedreno
