Add mdss and dpu node to enable display support on SM6115. Signed-off-by: Adam Skladowski <a39....@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dyb...@linaro.org> --- arch/arm64/boot/dts/qcom/sm6115.dtsi | 183 +++++++++++++++++++++++++++ 1 file changed, 183 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi
b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 6e0699649257..c476b5ecb62b 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -726,6 +726,189 @@ usb_1_dwc3: usb@4e00000 {
};
};
+ mdss: display-subsystem@5e00000 {
+ compatible = "qcom,sm6115-mdss";
+ reg = <0x05e00000 0x1000>;
+ reg-names = "mdss";
+
+ power-domains = <&dispcc MDSS_GDSC>;
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x420 0x2>,
+ <&apps_smmu 0x421 0x0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ status = "disabled";
+
+ mdp: display-controller@5e01000 {
+ compatible = "qcom,sm6115-dpu";
+ reg = <0x05e01000 0x8f000>,
+ <0x05eb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_ROT_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "iface",
+ "core",
+ "lut",
+ "rot",
+ "vsync";
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmpd SM6115_VDDCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint =
<&dsi0_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-19200000 {
+ opp-hz = /bits/ 64 <19200000>;
+ required-opps =
<&rpmpd_opp_min_svs>;
+ };
+
+ opp-192000000 {
+ opp-hz = /bits/ 64 <192000000>;
+ required-opps =
<&rpmpd_opp_low_svs>;
+ };
+
+ opp-256000000 {
+ opp-hz = /bits/ 64 <256000000>;
+ required-opps =
<&rpmpd_opp_svs>;
+ };
+
+ opp-307200000 {
+ opp-hz = /bits/ 64 <307200000>;
+ required-opps =
<&rpmpd_opp_svs_plus>;
+ };
+
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ required-opps =
<&rpmpd_opp_nom>;
+ };
+ };
+ };
+
+ dsi0: dsi@5e94000 {
+ compatible = "qcom,dsi-ctrl-6g-qcm2290";
+ reg = <0x05e94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc
DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc
DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>,
<&dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmpd SM6115_VDDCX>;
+ phys = <&dsi0_phy>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint =
<&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+
+ dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-19200000 {
+ opp-hz = /bits/ 64 <19200000>;
+ required-opps =
<&rpmpd_opp_min_svs>;
+ };
+
+ opp-164000000 {
+ opp-hz = /bits/ 64 <164000000>;
+ required-opps =
<&rpmpd_opp_low_svs>;
+ };
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps =
<&rpmpd_opp_svs>;
+ };
+ };
+ };
+
+ dsi0_phy: phy@5e94400 {
+ compatible = "qcom,dsi-phy-14nm-2290";
+ reg = <0x05e94400 0x100>,
+ <0x05e94500 0x300>,
+ <0x05e94800 0x188>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "iface", "ref";
+
+ status = "disabled";
+ };
+ };
+
dispcc: clock-controller@5f00000 {
compatible = "qcom,sm6115-dispcc";
reg = <0x05f00000 0x20000>;
--
2.25.1
