Continue ordering DT nodes. Move RNG, UFS, system NoC and SLPI nodes
to the proper position.

Signed-off-by: Dmitry Baryshkov <dmitry.barysh...@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 314 +++++++++++++--------------
 1 file changed, 157 insertions(+), 157 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi 
b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 061aa3fec1c4..c327dc925793 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1423,6 +1423,13 @@ spi13: spi@a94000 {
                        };
                };
 
+               rng: rng@10d3000 {
+                       compatible = "qcom,prng-ee";
+                       reg = <0 0x010d3000 0 0x1000>;
+                       clocks = <&rpmhcc RPMH_HWKM_CLK>;
+                       clock-names = "core";
+               };
+
                config_noc: interconnect@1500000 {
                        compatible = "qcom,sm8350-config-noc";
                        reg = <0 0x01500000 0 0xa580>;
@@ -1643,18 +1650,76 @@ pcie1_phy: phy@1c0f000 {
                        status = "disabled";
                };
 
-               lpass_ag_noc: interconnect@3c40000 {
-                       compatible = "qcom,sm8350-lpass-ag-noc";
-                       reg = <0 0x03c40000 0 0xf080>;
-                       #interconnect-cells = <2>;
-                       qcom,bcm-voters = <&apps_bcm_voter>;
+               ufs_mem_hc: ufshc@1d84000 {
+                       compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
+                                    "jedec,ufs-2.0";
+                       reg = <0 0x01d84000 0 0x3000>;
+                       interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+                       phys = <&ufs_mem_phy_lanes>;
+                       phy-names = "ufsphy";
+                       lanes-per-direction = <2>;
+                       #reset-cells = <1>;
+                       resets = <&gcc GCC_UFS_PHY_BCR>;
+                       reset-names = "rst";
+
+                       power-domains = <&gcc UFS_PHY_GDSC>;
+
+                       iommus = <&apps_smmu 0xe0 0x0>;
+
+                       clock-names =
+                               "core_clk",
+                               "bus_aggr_clk",
+                               "iface_clk",
+                               "core_clk_unipro",
+                               "ref_clk",
+                               "tx_lane0_sync_clk",
+                               "rx_lane0_sync_clk",
+                               "rx_lane1_sync_clk";
+                       clocks =
+                               <&gcc GCC_UFS_PHY_AXI_CLK>,
+                               <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+                               <&gcc GCC_UFS_PHY_AHB_CLK>,
+                               <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+                               <&rpmhcc RPMH_CXO_CLK>,
+                               <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+                               <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+                               <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+                       freq-table-hz =
+                               <75000000 300000000>,
+                               <0 0>,
+                               <0 0>,
+                               <75000000 300000000>,
+                               <0 0>,
+                               <0 0>,
+                               <0 0>,
+                               <0 0>;
+                       status = "disabled";
                };
 
-               compute_noc: interconnect@a0c0000 {
-                       compatible = "qcom,sm8350-compute-noc";
-                       reg = <0 0x0a0c0000 0 0xa180>;
-                       #interconnect-cells = <2>;
-                       qcom,bcm-voters = <&apps_bcm_voter>;
+               ufs_mem_phy: phy@1d87000 {
+                       compatible = "qcom,sm8350-qmp-ufs-phy";
+                       reg = <0 0x01d87000 0 0x1c4>;
+                       #address-cells = <2>;
+                       #size-cells = <2>;
+                       ranges;
+                       clock-names = "ref",
+                                     "ref_aux";
+                       clocks = <&rpmhcc RPMH_CXO_CLK>,
+                                <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+                       resets = <&ufs_mem_hc 0>;
+                       reset-names = "ufsphy";
+                       status = "disabled";
+
+                       ufs_mem_phy_lanes: phy@1d87400 {
+                               reg = <0 0x01d87400 0 0x188>,
+                                     <0 0x01d87600 0 0x200>,
+                                     <0 0x01d87c00 0 0x200>,
+                                     <0 0x01d87800 0 0x188>,
+                                     <0 0x01d87a00 0 0x200>;
+                               #clock-cells = <1>;
+                               #phy-cells = <0>;
+                       };
                };
 
                ipa: ipa@1e40000 {
@@ -1702,6 +1767,13 @@ tcsr_mutex: hwlock@1f40000 {
                        #hwlock-cells = <1>;
                };
 
+               lpass_ag_noc: interconnect@3c40000 {
+                       compatible = "qcom,sm8350-lpass-ag-noc";
+                       reg = <0 0x03c40000 0 0xf080>;
+                       #interconnect-cells = <2>;
+                       qcom,bcm-voters = <&apps_bcm_voter>;
+               };
+
                mpss: remoteproc@4080000 {
                        compatible = "qcom,sm8350-mpss-pas";
                        reg = <0x0 0x04080000 0x0 0x4040>;
@@ -1744,6 +1816,74 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
                        };
                };
 
+               slpi: remoteproc@5c00000 {
+                       compatible = "qcom,sm8350-slpi-pas";
+                       reg = <0 0x05c00000 0 0x4000>;
+
+                       interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+                                             <&smp2p_slpi_in 0 
IRQ_TYPE_EDGE_RISING>,
+                                             <&smp2p_slpi_in 1 
IRQ_TYPE_EDGE_RISING>,
+                                             <&smp2p_slpi_in 2 
IRQ_TYPE_EDGE_RISING>,
+                                             <&smp2p_slpi_in 3 
IRQ_TYPE_EDGE_RISING>;
+                       interrupt-names = "wdog", "fatal", "ready",
+                                         "handover", "stop-ack";
+
+                       clocks = <&rpmhcc RPMH_CXO_CLK>;
+                       clock-names = "xo";
+
+                       power-domains = <&rpmhpd SM8350_LCX>,
+                                       <&rpmhpd SM8350_LMX>;
+                       power-domain-names = "lcx", "lmx";
+
+                       memory-region = <&pil_slpi_mem>;
+
+                       qcom,qmp = <&aoss_qmp>;
+
+                       qcom,smem-states = <&smp2p_slpi_out 0>;
+                       qcom,smem-state-names = "stop";
+
+                       status = "disabled";
+
+                       glink-edge {
+                               interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+                                                            
IPCC_MPROC_SIGNAL_GLINK_QMP
+                                                            
IRQ_TYPE_EDGE_RISING>;
+                               mboxes = <&ipcc IPCC_CLIENT_SLPI
+                                               IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+                               label = "slpi";
+                               qcom,remote-pid = <3>;
+
+                               fastrpc {
+                                       compatible = "qcom,fastrpc";
+                                       qcom,glink-channels = 
"fastrpcglink-apps-dsp";
+                                       label = "sdsp";
+                                       qcom,non-secure-domain;
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+
+                                       compute-cb@1 {
+                                               compatible = 
"qcom,fastrpc-compute-cb";
+                                               reg = <1>;
+                                               iommus = <&apps_smmu 0x0541 
0x0>;
+                                       };
+
+                                       compute-cb@2 {
+                                               compatible = 
"qcom,fastrpc-compute-cb";
+                                               reg = <2>;
+                                               iommus = <&apps_smmu 0x0542 
0x0>;
+                                       };
+
+                                       compute-cb@3 {
+                                               compatible = 
"qcom,fastrpc-compute-cb";
+                                               reg = <3>;
+                                               iommus = <&apps_smmu 0x0543 
0x0>;
+                                               /* note: shared-cb = <4> in 
downstream */
+                                       };
+                               };
+                       };
+               };
+
                pdc: interrupt-controller@b220000 {
                        compatible = "qcom,sm8350-pdc", "qcom,pdc";
                        reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
@@ -2014,153 +2154,6 @@ qup_i2c19_default: qup-i2c19-default-state {
                        };
                };
 
-               rng: rng@10d3000 {
-                       compatible = "qcom,prng-ee";
-                       reg = <0 0x010d3000 0 0x1000>;
-                       clocks = <&rpmhcc RPMH_HWKM_CLK>;
-                       clock-names = "core";
-               };
-
-               ufs_mem_hc: ufshc@1d84000 {
-                       compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
-                                    "jedec,ufs-2.0";
-                       reg = <0 0x01d84000 0 0x3000>;
-                       interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-                       phys = <&ufs_mem_phy_lanes>;
-                       phy-names = "ufsphy";
-                       lanes-per-direction = <2>;
-                       #reset-cells = <1>;
-                       resets = <&gcc GCC_UFS_PHY_BCR>;
-                       reset-names = "rst";
-
-                       power-domains = <&gcc UFS_PHY_GDSC>;
-
-                       iommus = <&apps_smmu 0xe0 0x0>;
-
-                       clock-names =
-                               "core_clk",
-                               "bus_aggr_clk",
-                               "iface_clk",
-                               "core_clk_unipro",
-                               "ref_clk",
-                               "tx_lane0_sync_clk",
-                               "rx_lane0_sync_clk",
-                               "rx_lane1_sync_clk";
-                       clocks =
-                               <&gcc GCC_UFS_PHY_AXI_CLK>,
-                               <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
-                               <&gcc GCC_UFS_PHY_AHB_CLK>,
-                               <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
-                               <&rpmhcc RPMH_CXO_CLK>,
-                               <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
-                               <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
-                               <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
-                       freq-table-hz =
-                               <75000000 300000000>,
-                               <0 0>,
-                               <0 0>,
-                               <75000000 300000000>,
-                               <0 0>,
-                               <0 0>,
-                               <0 0>,
-                               <0 0>;
-                       status = "disabled";
-               };
-
-               ufs_mem_phy: phy@1d87000 {
-                       compatible = "qcom,sm8350-qmp-ufs-phy";
-                       reg = <0 0x01d87000 0 0x1c4>;
-                       #address-cells = <2>;
-                       #size-cells = <2>;
-                       ranges;
-                       clock-names = "ref",
-                                     "ref_aux";
-                       clocks = <&rpmhcc RPMH_CXO_CLK>,
-                                <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
-
-                       resets = <&ufs_mem_hc 0>;
-                       reset-names = "ufsphy";
-                       status = "disabled";
-
-                       ufs_mem_phy_lanes: phy@1d87400 {
-                               reg = <0 0x01d87400 0 0x188>,
-                                     <0 0x01d87600 0 0x200>,
-                                     <0 0x01d87c00 0 0x200>,
-                                     <0 0x01d87800 0 0x188>,
-                                     <0 0x01d87a00 0 0x200>;
-                               #clock-cells = <1>;
-                               #phy-cells = <0>;
-                       };
-               };
-
-               slpi: remoteproc@5c00000 {
-                       compatible = "qcom,sm8350-slpi-pas";
-                       reg = <0 0x05c00000 0 0x4000>;
-
-                       interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
-                                             <&smp2p_slpi_in 0 
IRQ_TYPE_EDGE_RISING>,
-                                             <&smp2p_slpi_in 1 
IRQ_TYPE_EDGE_RISING>,
-                                             <&smp2p_slpi_in 2 
IRQ_TYPE_EDGE_RISING>,
-                                             <&smp2p_slpi_in 3 
IRQ_TYPE_EDGE_RISING>;
-                       interrupt-names = "wdog", "fatal", "ready",
-                                         "handover", "stop-ack";
-
-                       clocks = <&rpmhcc RPMH_CXO_CLK>;
-                       clock-names = "xo";
-
-                       power-domains = <&rpmhpd SM8350_LCX>,
-                                       <&rpmhpd SM8350_LMX>;
-                       power-domain-names = "lcx", "lmx";
-
-                       memory-region = <&pil_slpi_mem>;
-
-                       qcom,qmp = <&aoss_qmp>;
-
-                       qcom,smem-states = <&smp2p_slpi_out 0>;
-                       qcom,smem-state-names = "stop";
-
-                       status = "disabled";
-
-                       glink-edge {
-                               interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
-                                                            
IPCC_MPROC_SIGNAL_GLINK_QMP
-                                                            
IRQ_TYPE_EDGE_RISING>;
-                               mboxes = <&ipcc IPCC_CLIENT_SLPI
-                                               IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
-                               label = "slpi";
-                               qcom,remote-pid = <3>;
-
-                               fastrpc {
-                                       compatible = "qcom,fastrpc";
-                                       qcom,glink-channels = 
"fastrpcglink-apps-dsp";
-                                       label = "sdsp";
-                                       qcom,non-secure-domain;
-                                       #address-cells = <1>;
-                                       #size-cells = <0>;
-
-                                       compute-cb@1 {
-                                               compatible = 
"qcom,fastrpc-compute-cb";
-                                               reg = <1>;
-                                               iommus = <&apps_smmu 0x0541 
0x0>;
-                                       };
-
-                                       compute-cb@2 {
-                                               compatible = 
"qcom,fastrpc-compute-cb";
-                                               reg = <2>;
-                                               iommus = <&apps_smmu 0x0542 
0x0>;
-                                       };
-
-                                       compute-cb@3 {
-                                               compatible = 
"qcom,fastrpc-compute-cb";
-                                               reg = <3>;
-                                               iommus = <&apps_smmu 0x0543 
0x0>;
-                                               /* note: shared-cb = <4> in 
downstream */
-                                       };
-                               };
-                       };
-               };
-
                sdhc_2: mmc@8804000 {
                        compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
                        reg = <0 0x08804000 0 0x1000>;
@@ -2309,6 +2302,13 @@ system-cache-controller@9200000 {
                        reg-names = "llcc_base", "llcc_broadcast_base";
                };
 
+               compute_noc: interconnect@a0c0000 {
+                       compatible = "qcom,sm8350-compute-noc";
+                       reg = <0 0x0a0c0000 0 0xa180>;
+                       #interconnect-cells = <2>;
+                       qcom,bcm-voters = <&apps_bcm_voter>;
+               };
+
                usb_1: usb@a6f8800 {
                        compatible = "qcom,sm8350-dwc3", "qcom,dwc3";
                        reg = <0 0x0a6f8800 0 0x400>;
-- 
2.39.1

Reply via email to