On 5/7/2023 7:15 PM, Bjorn Andersson wrote:
On Mon, May 08, 2023 at 01:06:13AM +0000, Leonard Lausen wrote:
This reverts commit e17af1c9d861dc177e5b56009bd4f71ace688d97.
Removing the delay of 100 units broke hot plug detection for USB-C displays on
qcom sc7180 lazor devices. Lazor uses mdss for hot plug detection and declares
dp_hot_plug_det in the dts. Other sc7180 based devices like aspire1 were not
affected by the regression, as they do not rely on mdss and dp_hot_plug_det for
hot plug detection.
Signed-off-by: Leonard Lausen <leon...@lausen.nl>
Tested-by: Leonard Lausen <leon...@lausen.nl> # Trogdor (sc7180)
Suggested-by: Dmitry Baryshkov <dmitry.barysh...@linaro.org>
---
drivers/gpu/drm/msm/dp/dp_display.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c
b/drivers/gpu/drm/msm/dp/dp_display.c
index bde1a7ce442f..db9783ffd5cf 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -1506,7 +1506,7 @@ void msm_dp_irq_postinstall(struct msm_dp *dp_display)
dp = container_of(dp_display, struct dp_display_private, dp_display);
if (!dp_display->is_edp)
- dp_add_event(dp, EV_HPD_INIT_SETUP, 0, 0);
+ dp_add_event(dp, EV_HPD_INIT_SETUP, 0, 100);
When booting with the cable connected on my X13s, 100 is long enough for
my display to time out and require me to disconnect and reconnect the
cable again.
Do we have any idea of why the reduction to 0 is causing an issue when
using the internal HPD?
Regards,
Bjorn
Yes, we do know why this is causing an issue. The cleaner patch for this
will be posted this week.
There is no need to add the 100ms delay back yet.
thanks for posting this but NAK on this patch till we post the fix this
week.
Appreciate a bit of patience till then.
}
bool msm_dp_wide_bus_available(const struct msm_dp *dp_display)
--
2.30.2
