On 2023-05-20 03:28:46, Dmitry Baryshkov wrote: > Simplify calculatoins around pixel_clk_rate division. Replace common
calculations* > pattern of doing 64-bit multiplication and then a do_div() call with > simpler mult_frac call. > > Signed-off-by: Dmitry Baryshkov <dmitry.barysh...@linaro.org> That's a cool function, I did not know of its existence! Will keep it in mind in future drm/msm changes and review, thanks for showing this! (There seem to be a few more places where we *could* apply this) Reviewed-by: Marijn Suijten <marijn.suij...@somainline.org> > --- > drivers/gpu/drm/msm/dsi/dsi_host.c | 11 ++++------- > 1 file changed, 4 insertions(+), 7 deletions(-) > > diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c > b/drivers/gpu/drm/msm/dsi/dsi_host.c > index 2b257b459974..744f2398a6d6 100644 > --- a/drivers/gpu/drm/msm/dsi/dsi_host.c > +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c > @@ -585,7 +585,7 @@ unsigned long dsi_byte_clk_get_rate(struct mipi_dsi_host > *host, bool is_bonded_d > u8 lanes = msm_host->lanes; > u32 bpp = dsi_get_bpp(msm_host->format); > unsigned long pclk_rate = dsi_get_pclk_rate(mode, is_bonded_dsi); > - u64 pclk_bpp = (u64)pclk_rate * bpp; > + unsigned long pclk_bpp; > > if (lanes == 0) { > pr_err("%s: forcing mdss_dsi lanes to 1\n", __func__); > @@ -594,9 +594,9 @@ unsigned long dsi_byte_clk_get_rate(struct mipi_dsi_host > *host, bool is_bonded_d > > /* CPHY "byte_clk" is in units of 16 bits */ > if (msm_host->cphy_mode) > - do_div(pclk_bpp, (16 * lanes)); > + pclk_bpp = mult_frac(pclk_rate, bpp, 16 * lanes); > else > - do_div(pclk_bpp, (8 * lanes)); > + pclk_bpp = mult_frac(pclk_rate, bpp, 8 * lanes); > > return pclk_bpp; > } > @@ -627,15 +627,12 @@ int dsi_calc_clk_rate_6g(struct msm_dsi_host *msm_host, > bool is_bonded_dsi) > int dsi_calc_clk_rate_v2(struct msm_dsi_host *msm_host, bool is_bonded_dsi) > { > u32 bpp = dsi_get_bpp(msm_host->format); > - u64 pclk_bpp; > unsigned int esc_mhz, esc_div; > unsigned long byte_mhz; > > dsi_calc_pclk(msm_host, is_bonded_dsi); > > - pclk_bpp = (u64)msm_host->pixel_clk_rate * bpp; > - do_div(pclk_bpp, 8); > - msm_host->src_clk_rate = pclk_bpp; > + msm_host->src_clk_rate = mult_frac(msm_host->pixel_clk_rate, bpp, 8); > > /* > * esc clock is byte clock followed by a 4 bit divider, > -- > 2.39.2 >