On Tue, Aug 08, 2023 at 03:19:50PM -0700, Kuogee Hsieh wrote:
> DP PHY re-initialization done using dp_ctrl_reinitialize_mainlink() will
> cause PLL unlocked initially and then PLL gets locked at the end of
> initialization. PLL_UNLOCKED interrupt will fire during this time if the
> interrupt mask is enabled.
> However currently DP driver link training implementation incorrectly
> re-initializes PHY unconditionally during link training as the PHY was
> already configured in dp_ctrl_enable_mainlink_clocks().
> 
> Fix this by re-initializing the PHY only if the previous link training
> failed.
> 
> [drm:dp_aux_isr] *ERROR* Unexpected DP AUX IRQ 0x01000000 when not busy
> 
> Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
> Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/30
> Signed-off-by: Kuogee Hsieh <quic_khs...@quicinc.com>

This fixes the above warning and avoids the unnecessary PHY power-off
and power-on during boot of the ThinkPad X13s:

Reviewed-by: Johan Hovold <johan+lin...@kernel.org>
Tested-by: Johan Hovold <johan+lin...@kernel.org>

I guess this one should go to stable as well:

Cc: sta...@vger.kernel.org      # 5.10

Is anyone planning on getting this fixed in 6.6-rc? I noticed that this
one still hasn't shown up linux-next.

> ---
>  drivers/gpu/drm/msm/dp/dp_ctrl.c | 13 ++++++-------
>  1 file changed, 6 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c 
> b/drivers/gpu/drm/msm/dp/dp_ctrl.c
> index a7a5c7e..77a8d93 100644
> --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
> @@ -1774,13 +1774,6 @@ int dp_ctrl_on_link(struct dp_ctrl *dp_ctrl)
>               return rc;
>  
>       while (--link_train_max_retries) {
> -             rc = dp_ctrl_reinitialize_mainlink(ctrl);
> -             if (rc) {
> -                     DRM_ERROR("Failed to reinitialize mainlink. rc=%d\n",
> -                                     rc);
> -                     break;
> -             }
> -
>               training_step = DP_TRAINING_NONE;
>               rc = dp_ctrl_setup_main_link(ctrl, &training_step);
>               if (rc == 0) {
> @@ -1832,6 +1825,12 @@ int dp_ctrl_on_link(struct dp_ctrl *dp_ctrl)
>                       /* stop link training before start re training  */
>                       dp_ctrl_clear_training_pattern(ctrl);
>               }
> +
> +             rc = dp_ctrl_reinitialize_mainlink(ctrl);
> +             if (rc) {
> +                     DRM_ERROR("Failed to reinitialize mainlink. rc=%d\n", 
> rc);
> +                     break;
> +             }
>       }
>  
>       if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN)

Johan

Reply via email to