Add the required nodes to support display on QCM2290. Reviewed-by: Dmitry Baryshkov <dmitry.barysh...@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dyb...@linaro.org> --- arch/arm64/boot/dts/qcom/qcm2290.dtsi | 214 ++++++++++++++++++++++++++++++++++ 1 file changed, 214 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi index d46e591e72b5..a3edc4667cc5 100644 --- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi @@ -5,6 +5,7 @@ * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain. */ +#include <dt-bindings/clock/qcom,dispcc-qcm2290.h> #include <dt-bindings/clock/qcom,gcc-qcm2290.h> #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/dma/qcom-gpi.h> @@ -1105,6 +1106,219 @@ usb_dwc3: usb@4e00000 { }; }; + mdss: display-subsystem@5e00000 { + compatible = "qcom,qcm2290-mdss"; + reg = <0x0 0x05e00000 0x0 0x1000>; + reg-names = "mdss"; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "bus", + "core"; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + power-domains = <&dispcc MDSS_GDSC>; + + iommus = <&apps_smmu 0x420 0x2>, + <&apps_smmu 0x421 0x0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdp: display-controller@5e01000 { + compatible = "qcom,qcm2290-dpu"; + reg = <0x0 0x05e01000 0x0 0x8f000>, + <0x0 0x05eb0000 0x0 0x2008>; + reg-names = "mdp", + "vbif"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "iface", + "core", + "lut", + "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd QCM2290_VDDCX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmpd_opp_min_svs>; + }; + + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-256000000 { + opp-hz = /bits/ 64 <256000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + mdss_dsi0: dsi@5e94000 { + compatible = "qcom,qcm2290-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0 0x05e94000 0x0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd QCM2290_VDDCX>; + phys = <&mdss_dsi0_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmpd_opp_min_svs>; + }; + + opp-164000000 { + opp-hz = /bits/ 64 <164000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmpd_opp_svs>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@5e94400 { + compatible = "qcom,dsi-phy-14nm-2290"; + reg = <0x0 0x05e94400 0x0 0x100>, + <0x0 0x05e94500 0x0 0x300>, + <0x0 0x05e94800 0x0 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "ref"; + + power-domains = <&rpmpd QCM2290_VDDMX>; + required-opps = <&rpmpd_opp_nom>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + }; + + dispcc: clock-controller@5f00000 { + compatible = "qcom,qcm2290-dispcc"; + reg = <0x0 0x05f00000 0x0 0x20000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&rpmcc RPM_SMD_XO_A_CLK_SRC>, + <&gcc GCC_DISP_GPLL0_CLK_SRC>, + <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + clock-names = "bi_tcxo", + "bi_tcxo_ao", + "gcc_disp_gpll0_clk_src", + "gcc_disp_gpll0_div_clk_src", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk"; + #power-domain-cells = <1>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + remoteproc_mpss: remoteproc@6080000 { compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas"; reg = <0x0 0x06080000 0x0 0x100>; -- 2.43.0