Hi Al, I did test with CVS version for ipmi-chassis too. The ipmi-chassis issue that can't set boot device to PXE on X4200, is also fixed. So, both issues are fixed now.
Thanks again Al! -Ihara Al Chu wrote: > Hey Ihara, > > I think there was a bug in the flags for the boot-device. Can you > please let me know if this fixes things for you now? It's in the same > CVS location as mentioned previously. > > If this and the ipmi-fru thing are fixed, I will release a FreeIPMI > 0.6.2. > > Thanks, > Al > > On Tue, 2008-05-13 at 11:03 +0900, Shuichi Ihara wrote: >> Hi Al, >> >>> After you set the boot-device w/ -L, does it show up correctly with -G >>> (--get-boot-flags)? Could you run the ipmi-chassis command with --debug. >>> We can see if the packet dump are looking fine. >> I attached dump file(ipmi-chassis-debug.out) when run ipmi-chassis with "-L >> --debug" option. >> >>> I personally haven't tested this b/c I don't have a machine that >>> supports IPMI boot configuration. Are you sure the Sun machine supports >>> IPMI based boot configuration? >> Yes, it's implemented and work this feature via ipmitool. >> However, I found strange point when I ran ipmi-cahssis after the ipmitool >> execution. >> Please see below. >> >> # ipmi-chassis -h 10.14.16.23 -p changeme -u root -W "endianseq" -L >> --boot-device=PXE >> # ipmi-chassis -h 10.14.16.23 -p changeme -u root -W "endianseq" >> --get-boot-flags >> BIOS boot type : PC compatible boot >> Lock out reset buttons : Disabled >> Screen blank : Disabled >> Boot device selector : Force PXE >> Lock keyboard : Disabled >> Clear CMOS : Disabled >> Console redirection control : System default >> Lock out sleep button : Disabled >> User password bypass : Disabled >> Lock out reset button : Disabled >> Force progress event traps : Disabled >> Firmware BIOS verbosity level : Default >> Lock out via power button : Disabled >> >> it looks "boot device selector" is set to PXE, but this is different after >> the run ipmitool to >> set to PXE. In this case, the boot device selector is blank below. I also >> attached dump file >> with "--debug" option in this case. >> >> # ipmitool -H 10.14.16.23 -P changeme -U root chassis bootdev pxe >> # ipmi-chassis -h 10.14.16.23 -p changeme -u root -W "endianseq" >> --get-boot-flags >> BIOS boot type : PC compatible boot >> Lock out reset buttons : Disabled >> Screen blank : Disabled >> Boot device selector : >> Lock keyboard : Disabled >> Clear CMOS : Disabled >> Console redirection control : System default >> Lock out sleep button : Disabled >> User password bypass : Disabled >> Lock out reset button : Disabled >> Force progress event traps : Disabled >> Firmware BIOS verbosity level : Default >> Lock out via power button : Disabled >> >>>> 2. can't get MAC address from the FRU information >>>> # ipmi-fru -v -h 192.168.10.3 -u root -p changeme -W "endianseq" >>>> -snip- >>>> FRU Inventory Device ID: 0x0E >>>> FRU Get FRU Inventory Area Failure: bad completion code: request >>>> data/parameter invalid >>>> >>>> FRU Inventory Device ID: 0x0F >>>> FRU Get FRU Inventory Area Failure: bad completion code: request >>>> data/parameter invalid >>>> >>>> FRU Inventory Device ID: 0x10 >>>> >>>> FRU Product Manufacturer Name: INTEL >>>> FRU Product Product Name: DUAL >>>> ??K?/?2??/uct Version Type: ?4p?g(?4P?h)?% >>> Just to make sure, are you using the newest FreeIPMI? 0.6.1? Awhiles >>> ago I did fix a corner case in the six-bit-ascii output. This could be >>> related to it. >> Yes, I'm using 0.6.1 which is latest version. >> >>>> ? >>>> FRU Unknown BCD Character: 0xC7 >>>> FRU Product Info: Remaining Area Cannot Be Parsed >>> It's hard to say based on this. It's possible there are some OEM >>> specific stuff in this FRU output which is why I cannot decode it. >>> Could you send the --debug output? >> I did and attached it(filename is ipmi-fru-debug.out) >> And I also attached ipmitool-fru.out which is dump information with >> "ipmitool fru". >> >>> Thanks, >>> Al >> Thanks for your helps. >> >> -Ihara _______________________________________________ Freeipmi-users mailing list Freeipmi-users@gnu.org http://lists.gnu.org/mailman/listinfo/freeipmi-users
