Hey Kimitoshi, I think I found a corner case in the code where the non-default port was not used correctly. Could you give it a shot?
http://ftp.zresearch.com/pub/freeipmi/qa- release/freeipmi-0.6.9.beta2.tar.gz Thanks, Al On Wed, 2008-09-24 at 20:38 +0900, Kimitoshi Takahashi wrote: > Hi Al, > > Here it is. > > [EMAIL PROTECTED]:~# /usr/ccmp/sbin/ipmiconsole -W authcap,solpayloadsize -u > rt -p rt -h 192.168.20.116 --debug 2>/tmp/debug > > never returns to the shell. > > sh-3.1$ egrep -v "^192.16" /tmp/debug_069b0_wo_solport > (ipmiconsole_checks.c, ipmiconsole_check_outbound_sequence_number, 254): > hostname=192.168.20.116; protocol_state=0x5: session sequence number check > failed; p = 9; session_sequence_number = 0; highest_received_sequence_number > = 0 > (ipmiconsole_processing.c, _process_protocol_state_activate_payload_sent, > 2957): hostname=192.168.20.116; protocol_state=0x8: trying new port: 6F02 > (ipmiconsole_checks.c, ipmiconsole_check_outbound_sequence_number, 254): > hostname=192.168.20.116; protocol_state=0x5: session sequence number check > failed; p = 9; session_sequence_number = 0; highest_received_sequence_number > = 0 > > Attached is the --debug output. > > > Hey Kimitoshi, > > > > Could you try 0.6.9.beta0 w/o the solport workaround too? > > > > Thanks, > > Al > > -- Albert Chu [EMAIL PROTECTED] 925-422-5311 Computer Scientist High Performance Systems Division Lawrence Livermore National Laboratory _______________________________________________ Freeipmi-users mailing list [email protected] http://lists.gnu.org/mailman/listinfo/freeipmi-users
