Hi Al,
support for it in the following beta, can you LMK if it works for you.
I got this error on "make install":
test -z "/usr/local/sbin" || mkdir -p -- "/usr/local/sbin"
/bin/sh ../../libtool --mode=install /usr/bin/install -c
'ipmi-pef-config' '/usr/local/sbin/ipmi-pef-config'
/usr/bin/install -c .libs/ipmi-pef-config /usr/local/sbin/ipmi-pef-config
make install-exec-hook
make[4]: Entering directory
`/root/software/freeipmi/freeipmi-1.0.2.beta3/ipmi-pef-config/src'
/root/software/freeipmi/freeipmi-1.0.2.beta3/config/install-sh -d -m 755
/usr/local/sbin
ln -s /usr/local/sbin/ipmi-pef-config /usr/local/sbin/pef-config
ln: creating symbolic link `/usr/local/sbin/pef-config': File exists
I then removed the existing symbolic link and ran "make install" again.
Next error was about "/usr/local/sbin/ipmi-console". Therefore, I removed
all symlinks in that dir. Installation went fine afterwards and all
symlinks were created.
# ll /usr/local/sbin/ipmimonitoring
-rwxr-xr-x 1 root staff 412 2011-02-18 12:08 /usr/local/sbin/ipmimonitoring
# /usr/local/sbin/ipmimonitoring -V
ipmi-sensors - 1.0.2.beta3
# /usr/local/sbin/ipmimonitoring
ID | Name | Type | State | Reading |
Units | Event
74 | SD vFlash Status | Module/Board | N/A | N/A |
N/A | 'OEM Event = 0000h'
Though, the state is still shown as "N/A".
So I can finalize documentation, what motherboard is this specifically?
This is a Dell PowerEdge R210 with an Intel Xeon X3430 Quad Core. If you
need more info, please tell me where I can find that info.
Cheers
Lars
_______________________________________________
Freeipmi-users mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/freeipmi-users
