I just tried freeipmi (0.8.8 and 1.0.4) on this small server. "ipmi-sensors" give output:
ID | Name | Type | Reading | Units | Event 1 | Int. Health LED | OEM Reserved | N/A | N/A | 'OEM Event = 0000h' 2 | VRM (CPU1) | Power Unit | N/A | N/A | 'Device Inserted/Device Present' 3 | CPU Fan | Fan | N/A | N/A | 'transition to Running' 4 | Rear Fan | Fan | N/A | N/A | 'transition to Running' 5 | Temp 1 | Temperature | 32.00 | C | 'OK' 6 | Temp 2 | Temperature | 30.00 | C | 'OK' 7 | Temp 3 | Temperature | 22.00 | C | 'OK' I'm surprised, as there are no fan rotation speed values, nor some other values, as if they were not available - "N/A" in "Reading" column. Although it is entry-level server, sensors for these values now have even cheapest desktops, I'm right? Is possible that server cannot measure these values, or may be there another problem? "bmc-info" display: Device ID : 17 Device Revision : 1 Device SDRs : supported Firmware Revision : 1.42 Device Available : yes (normal operation) IPMI Version : 2.0 Sensor Device : supported SDR Repository Device : supported SEL Device : supported FRU Inventory Device : supported IPMB Event Receiver : unsupported IPMB Event Generator : unsupported Bridge : unsupported Chassis Device : unsupported Manufacturer ID : Hewlett-Packard (11) Product ID : 0 Channel Information Channel Number : 7 Medium Type : OEM Protocol Type : KCS Active Session Count : 0 Session Support : session-less Vendor ID : Intelligent Platform Management Interface forum (7154) Thank in advance, Franta Hanzlík _______________________________________________ Freeipmi-users mailing list [email protected] https://lists.gnu.org/mailman/listinfo/freeipmi-users
