Ignore this :)
I thought about it and now understand what you ment. There is a very useful list in xlat.c for alot of variables that can be used though. Would be very handy to have on the faq or something. - Si > > > What I am trying to do is this. > > > > > > groupmembership_filter = "(loginName=%u)(nasAccess=%{Huntgroup-Name}) > > > > > > %{Huntgroup-Name} does not get expanded to be the configued Huntgroup > > > though. > > > > Run it in debugging mode. See where/when rlm_preprocess adds in the > > huntgroup name. > > > > If it isn't added, then it can't be used. > > Don't quite get what you mean. > > This is what my debug for the preeproccess module sayes. > > Module: Loaded preprocess > preprocess: huntgroups = "/etc/raddb/huntgroups" > preprocess: hints = "/etc/raddb/hints" > preprocess: with_ascend_hack = no > preprocess: ascend_channels_per_line = 23 > preprocess: with_ntdomain_hack = no > preprocess: with_specialix_jetstream_hack = no > preprocess: with_cisco_vsa_hack = no > Module: Instantiated preprocess (preprocess) > > > This is in my /etc/raddb/huntgroups > > MAINLINE NAS-IP-Address == 10.10.10.10 > > > It doesn't seem to expand, but I am unsure if its cause I am using the > wrong name and if its supported. If its not supported, is it possible to > add, I don't mind doing the code for it, but just want to make sure its > possible before tearing into the code. > > - Si > > > Simon Allard (Senior Tool Monkey) > IHUG > Ph (09) 358-5067 Email: [EMAIL PROTECTED] > > WARNING: Excessive alcohol may lead you to believe people > are laughing WITH you. > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > Simon Allard (Senior Tool Monkey) IHUG Ph (09) 358-5067 Email: [EMAIL PROTECTED] WARNING: Excessive alcohol may lead you to believe people are laughing WITH you. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html