My checkrad seems to work but not the simultaneous use, i do not find
any line concerning it on logs even in debug mode,
what may happens to me ?
-- my nasslist file--
nas2.simicro.net nas2 usrhiper
indri:/etc/raddb# /usr/sbin/checkrad usrhiper 208.153.83.3 10338
nathalie 0a020a02
indri:/etc/raddb#
-- in users file, for test only, the reply message is to ensure that the
check arrives here --
# test ...
DEFAULT Simultaneous-Use := 1
Reply-Message += "CouCou ...",
Fall-Through = 1
-- a test with radtest, this user was connected at that time (on radwho)
--
indri:/etc/raddb# /usr/bin/radtest stephanie xxxxxx 192.168.10.98 0
testing123
Sending Access-Request of id 125 to 192.168.10.98:1812
User-Name = "stephanie"
User-Password =
"\372z\262\025\364\301\216\257\313i\230y\276\227\270"
NAS-IP-Address = indri
NAS-Port-Id = "0"
Sending Access-Request of id 125 to 192.168.10.98
User-Name = "stephanie"
User-Password =
"\372z\262\025\364\301\216\257\313i\230y\276\227\270"
NAS-IP-Address = indri
NAS-Port-Id = "0"
rad_recv: Access-Accept packet from host 192.168.10.98:1812, id=125,
length=65
Service-Type = Framed-User
Framed-Protocol = PPP
Reply-Message = "Hello stephanie !!!"
Reply-Message = "CouCou ..."
indri:/etc/raddb#
-- logs seen in the debug mode --
rad_recv: Access-Request packet from host 192.168.10.98:1072, id=125,
length=58
User-Name = "stephanie"
User-Password =
"\372z\262\025\364\301\216\257\313i\230y\276\227\270"
NAS-IP-Address = 255.255.255.255
NAS-Port-Id = "0"
rlm_sql: Reserving sql socket id: 4
rlm_sql: Released sql socket id: 4
rlm_sql: Reserving sql socket id: 4
rlm_sql: Stop packet with zero session length. (user 'stephanie', nas
'208.153.83.3')
rlm_sql: Released sql socket id: 4
Login OK: [stephanie] (from nas indri port 0)
Sending Access-Accept of id 125 to 192.168.10.98:1072
Service-Type = Framed-User
Framed-Protocol = PPP
Reply-Message = "Hello stephanie !!!"
Reply-Message = "CouCou ..."
rad_recv: Access-Request packet from host 192.168.10.98:1072, id=125,
length=58
Sending duplicate authentication reply to client indri:1072 - ID: 125
Sending Access-Accept of id 125 to 192.168.10.98
snmpget alredy installed ...
Did i miss a step ?
Thanx,
--
Do-Risika RAFIEFERANTSIARONJY
mailto:[EMAIL PROTECTED]
________________
Simicro Internet, mailto:[EMAIL PROTECTED], http://internet.simicro.mg
Tel : (+261) 20 22 648 83 (GMT +3), Fax : (+261) 20 22 661 83
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
