This is what we have did to the radiusd.conf file. With this we only get addresses form that range, and that is not what we want.
=================== ippool { session-db = "manati.db" ip-index = 196.12.162.64 range-start = 196.12.162.65 range-stop = 196.12.162.126 netmask = 255.255.255.224 cache-size = 5000 } =================== we have tried various things but cannot get it to give addresses based on the nas identifier. what are we doing wrong? Thanks Ben ----- Original Message ----- From: "Kostas Kalevras" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, May 03, 2002 7:17 AM Subject: Re: IPPOOL > On Thu, 2 May 2002, Ben Casado wrote: > > > We are trying to configure our radius to give out the addresses instead of > > the comm servers. For that we have downloaded the software and compiled it > > with the rlm_ippool. > > > > Can someone direct us to what we need to do next? > > > > > > Thanks in advanced, > > > > > > Ben > > Read the comments in radiusd.conf for the ippool module? They are quite > descriptive of what you need to do. > > -- > Kostas Kalevras Network Operations Center > [EMAIL PROTECTED] National Technical University of Athens, Greece > Work Phone: +30 10 7721861 > 'Go back to the shadow' Gandalf > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > **************************************************************************** *************************************** > **************************************************************************** *************************************** > Scanned by an email protection software that checks: Content, Attachments, Security and Viruses > Brought to you by ICENetworks.com, eScan and MailScan > **************************************************************************** *************************************** > **************************************************************************** *************************************** ******************************************************************************************************************* ******************************************************************************************************************* Scanned by an email protection software that checks: Content, Attachments, Security and Viruses Brought to you by ICENetworks.com, eScan and MailScan ******************************************************************************************************************* ******************************************************************************************************************* - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html