thanks Chris. I deleted the old files and started over. it took some redoing but it works fine now.
thanks for all your help. Quoting Aamer Akhter ([EMAIL PROTECTED]): > Chris, > > still problems. can you also CC me on the reply directly? I have to cut and past >from the > archive currently.. > > > > At 11:27 AM 5/10/2002 -0400, Aamer Akhter wrote: > >Hello, > > > >I just make the newest freeradius with the default settings, and something > >seems to have changed. Under the old freeradius this was working fine. > What version are you upgrading from? > > : from 0.1 > > >Here is the output from -X: > > > >rad_recv: Access-Request packet from host 10.13.0.41:1645, id=109, length=79 > > User-Name = "as" > > Password = "\331\257\\\025\337\025\341\036\n\367\016syc\374j" > > NAS-Port = 130 > > NAS-Port-Type = Virtual > > Calling-Station-Id = "10.13.0.254" > > Service-Type = Login-User > > NAS-IP-Address = 3640-PE-EAST-1 > >modcall: entering group authorize > > modcall[authorize]: module "preprocess" returns ok > > modcall[authorize]: module "suffix" returns ok > >Invalid operator for item : reverting to '==' > >Invalid operator for item : reverting to '==' > > Those should be fixed. > > : note that 0.1 isn't complaining about them. and i'm not really sure which lines >the above > : is complaining about. how do i find out? > > > modcall[authorize]: module "files" returns notfound > >modcall: group authorize returns ok > >auth: No Auth-Type configuration for the request, rejecting the user > > That's the problem. Module 'files' returned 'notfound', so it didn't > match the username for some reason. > > >smartbits Auth-Type := Local > > Password == "xxx", > > > These should all be on one line. > > :fixed > > >any ideas on what my next step should be? > > Perhaps you could try putting a blank line between each of the one-line > user entries you have at the bottom of the users file? > > :fixed > > i've attached the complete users file time time. maybe i'm missing something major >here > > > -- > Aamer Akhter / [EMAIL PROTECTED] > NSITE - cisco Systems > > lab Auth-Type == Local, Password == "xxx", Cisco-AVPair == >"shell:priv-lvl=0", Fall-Through = no > > #set console timeout be 20min > DEFAULT NAS-Port == 0, Idle-Timeout == 20, Cisco-Idle-Limit == 20, >Fall-Through = yes > > smartbits Auth-Type := Local, Password == "xxx", Cisco-AVPair == >"shell:priv-lvl=0", Fall-Through = no > > DEFAULT Auth-Type := System, Service-Type == Login-user, Fall-Through >= 1, Cisco-AVPair == "priv-lvl=15" > > # Reply-Message = "NSITE MPLS test network" > > cw2k Auth-Type := Local, Password == "xxx" > > aakhter-script Auth-Type := Local, Password == "xxx" > > rymcmaho-script Auth-Type := Local, Password == "xxx" > > mbrown-script Auth-Type := Local, Password == "xxx" > > jguy-script Auth-Type := Local, Password == "xxx" > > rajiva-script Auth-Type := Local, Password == "xxx" > > asharma-script Auth-Type := Local, Password == "xxx" > > jmcglaug-script Auth-Type := Local, Password == "xxx" > > rrajamon-script Auth-Type := Local, Password == "xxx" > > vpnsc Auth-Type := Local, Password == "xxx" > > mb Auth-Type := Local, Password == "mb" > > jguy Auth-Type := Local, Password == "jg" > > ra Auth-Type := Local, Password == "ra" > > rm Auth-Type := Local, Password == "rm" > > as Auth-Type := Local, Password == "as" > > rk Auth-Type := Local, Password == "rk" > > ssaran Auth-Type := Local, Password == "ssaran" > > vlim Auth-Type := Local, Password == "vlim" > > aa Auth-Type := Local, Password == "aa" > > fbovy Auth-Type := Local, Password == "fbovy" > > > DEFAULT Auth-Type == Pam > > > # On no match, the user is denied access. -- Aamer Akhter / [EMAIL PROTECTED] NSITE - cisco Systems - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html