Hello All Sorry about the giberish mail I sent before.Hope this one will be ok. Our service provider tried to move our dialup to new LNS(from Cisco to 3com) But when our customers tried to access us after dial up has cut over to different LNS, dial users are getting access reject instead of the standard access accept to their authentication requests After latest cut over attempt.our provider send me a log. But since I am new to radius,I don't know what to do. Because a guy who set up the radius suddenly left the company.And he didn't leave any documentation. We use radius and mysql for AAA. I am wondering is this problem happens because of 3com forward different attributes than Cisco one?
### Proxy action of an accepted request ### Relaying access request with id 177 (now 726) from c0a8fb4b (ipa1-r28-0.ipnet.telecom.co.nz) to Proxy-Action = "AUTHENTICATE" [flags = 0x00010400] NAS-IP-Address = 192.168.7.1 [flags = 0x00014500] NAS-Port = 136 [flags = 0x00014500] Cisco-NAS-Port = "Virtual-Access136" [flags = 0x00014400] NAS-Port-Type = Virtual [flags = 0x00014500] User-Name = "jjcharisma" [flags = 0x00014500] Called-Station-Id = "0870907500" [flags = 0x00014500] Calling-Station-Id = "78399400" [flags = 0x00014500] Service-Type = Framed [flags = 0x00014A00] Framed-Protocol = PPP [flags = 0x00014A00] User-Id = "jjcharisma" [flags = 0x00010400] NAS-Identifier = "192.168.7.1" [flags = 0x00014500] User-Realm = "ipa1-n20-9e2" [flags = 0x00010400] Proxy-State = "0" [flags = 0x00014000] rad_2rad_recv: received reply accept to RADIUS request 726/214 Framed-Protocol = PPP [flags = 0x00014A00] Service-Type = Framed [flags = 0x00014A00] Idle-Timeout = 1800 [flags = 0x00014A00] Proxy-State = "0" [flags = 0x00014000] #### Proxy action of a rejected request Relaying access request with id 196 (now 43592) from c0a80728 (ipa1-n20-9e2.ipne t.telecom.co.nz) Proxy-Action = "AUTHENTICATE" [flags = 0x00010400] User-Name = "jjcharisma" [flags = 0x00014500] NAS-IP-Address = 192.168.7.40 [flags = 0x00014500] NAS-Identifier = "192.168.7.40" [flags = 0x00014500] NAS-Port = 961 [flags = 0x00014500] Acct-Session-Id = "33884695" [flags = 0x00014500] USR-Interface-Index = 827 [flags = 0x00014600] USR-NAS-Supports-Tags = 0 [flags = 0x00004600] Service-Type = Framed [flags = 0x00014A00] Framed-Protocol = PPP [flags = 0x00014A00] USR-Chassis-Call-Slot = 26 [flags = 0x00014400] USR-Chassis-Call-Span = 1 [flags = 0x00014400] USR-Chassis-Call-Channel = 1074 [flags = 0x00014400] USR-Connect-Speed = NONE [flags = 0x00014400] Calling-Station-Id = "98130199" [flags = 0x00014500] Called-Station-Id = "0870907500" [flags = 0x00014500] NAS-Port-Type = Async [flags = 0x00014500] User-Id = "jjcharisma" [flags = 0x00010400] User-Realm = "ipa1-n20-9e2" [flags = 0x00010400] Proxy-State = "0" [flags = 0x00014000] rad_2rad_recv: received reply reject to RADIUS request 43592/72 Proxy-State = "0" [flags = 0x00014000] Accepted message was given by Cisco and Rejected message was given by 3Com . I am really confused why this is happening.As far as I know ,only ID and password are checked for authentication. Thanks in advance Simon â²Ø§~?ì¹»®&Þþéì¹»®&ÞI硶Úÿ0~·ž§bºÊ+ƒùb²ßî±êì†Ù¥