Hi, all
I would like to configure FreeRadius to allow LEAP based
authentication between Cisco client, Cisco AP350 ans FreeRadius
server.
My configuration:
freeradius-snapshot-20030528, compiled on Red Hat Linux 7.3
raddb/users file:
test Auth-Type := Local, User-Password == "pass",
Service-Type = Framed-User
raddb/clients.conf file:
client 127.0.0.1 {
secret = pass
shortname = localhost
nastype = other
}
client 192.168.1.254 {
secret = pass
shortname = ap350
nastype = cisco
}
I have "default_eap_type = leap" in the "eap" section of the radiusd.conf.
When I try to connect to the radius server, everything seems to be
working fine:
# radtest test pass localhost 1813 pass
Sending Access-Request of id 100 to 127.0.0.1:1812
User-Name = "test"
User-Password = "pass"
NAS-IP-Address = rambo.uniscomp.cz
NAS-Port = 1813
rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=100, length=32
Service-Type = Framed-User
Framed-IP-Netmask = 255.255.255.0
But when I try to connect from Cisco 350 NAS, i'm getting following:
Auth: Login OK: [test/<no User-Password attribute>] (from client ap350 port 37 cli
000c304c1aa0)
Info: rlm_eap_leap: No User-Password or NT-Password configured for this user
How should I correctly specify User-Password?
--
/* Miroslav Petricek [EMAIL PROTECTED]
UNIS COMPUTERS, spol. s r.o. Systemovy inzenyr - UNIX
-- http://www.petricek.cz/ ------ ICQ: 56183467 ------
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
