What is your ap?, you set up the eap and wep key, in the cisco 1200 ap this
is import.
att.
Mauricio
----- Original Message -----
From: "Pascal PELONI" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, June 03, 2003 9:24 AM
Subject: Re: FreeRadius - DLINK DWL-900+ - 802.1.X
> I forget to say that :
>
> 1. the authentication works well with radtest !
>
> $ radtest tst1 pp 127.0.0.1 1 test
> Sending Access-Request of id 68 to 127.0.0.1:1812
> User-Name = "tst1"
> User-Password =
> "\323\366\273\363\371Z\250]\231(w\265?\346G\253"
> NAS-IP-Address = localhost
> NAS-Port = 1
> rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=68, length=20
>
> 2. with my AP I have the following output in radius.log :
>
> Auth: Login incorrect: [pelo/<no User-Password
attribute>]
>
> Thanks.
>
> At 16:58 03/06/2003 +0200, you wrote:
> >I've already read the FAQ and the README's, but it still doesn't work.
> >
> >Here is part of my config :
> >
> >radiusd.conf
> >------------
> >modules {
> > eap {
> > default_eap_type = md5
> > md5 {
> > }
> > }
> >}
> >
> >authorize {
> > eap
> >}
> >
> >authenticate {
> > eap
> >}
> >
> >client.conf
> >-----------
> >client localhost {
> > secret = test
> > nastype = other
> > shortname = test
> >}
> >
> >huntgroups
> >----------
> >TEST NAS-IP-Address == 127.0.0.1, NAS-Port-Id == 0-3
> >
> >users
> >-----
> >DEFAULT Huntgroup-Name == "TEST"
> > Framed-IP-Address = 192.168.1.11+
> >
> >tst1 User-Password == "pp"
> >
> >tst2 Auth-Type := Local, User-Password == "pp"
> >
> >Could someone help ?
> >
> >Thanks, PP.
> >
> >
> >
> >At 09:31 30/05/2003 -0400, you wrote:
> >>Pascal PELONI <[EMAIL PROTECTED]> wrote:
> >> > The problem is that when I try to authenticate with my AP & W2K, it
> >> doesn't
> >> > work :
> >> >
> >> > # less /var/log/radius.log
> >> > Thu May 29 18:17:07 2003 : Auth: Login incorrect: [aa/<no
User-Password
> >> > attribute>] (from client ap-wlan port 0 cli 00-40-05-CB-AD-7C)
> >>
> >> Read the FAQ and the README's.
> >>
> >> Read the FAQ and the README's.
> >>
> >> Read the FAQ and the README's.
> >>
> >> Read the FAQ and the README's.
> >>
> >>
> >> Did I mention I *really* meant that you should read the FAQ and the
> >>README's?
> >>
> >> Alan DeKok.
> >>
> >>-
> >>List info/subscribe/unsubscribe? See
> >>http://www.freeradius.org/list/users.html
>
>
> -
> List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
>
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
