I've tried it on two machines, one running SuSE 8.1 the other SuSE 8.2. 'host localhost' resolves correctly on both machines and /etc/hosts contains the correct entry.
Prior to upgrading to freeradius-snapshot-20030625.tar.gz I had freeradius-snapshot-20030619.tar.gz running which worked correctly. Both were built from the same spec file which is the one distributed with FreeRADIUS modified for the new location of the dictionary files. When using radtest/radclient from 20030619 on the machine to test radiusd on a box running 20030625 it works. So it seems to me as if something has changed with the newer radclient? Regards, Alan > -----Original Message----- > From: [EMAIL PROTECTED] > > Because it can't find the IP address for localhost. Weird. It > works fine for me, so I would suggest checking /etc/hosts on your > system. > > Alan DeKok. > ------------------------------------------------------------------------------------------------------- This email, and any files transmitted with it, is copyright and may contain confidential information. The contents are intended for the use of the addressee(s) only. Unauthorized use may be unlawful. If you receive this email by mistake, please advise sender immediately. The views of the author may not necessarily constitute the views of Telco Electronics Limited. Nothing in this mail shall bind Telco Electronics Limited in any contract or obligation. Telco Electronics Limited 6-8 Oxford Court Brackley Northants NN13 7XY Tel 07000 701999 Fax 07000 701777 - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
