My system:
FreeBSD 4.8 + freeradius-0.8.1 authentication with mysql
.
Access server is Cisco 3640 series and
IOS version 12.2.
My Question:
I use RAN (Remote Access Network) to
Router 3640 by
username: [EMAIL PROTECTED] and
password: test555
when I used authentication on router
3640, it 's OK.
But when I used radius authentication and
into debug mode it shown.
rad_recv: Accounting-Request packet from
host 203.121.143.20:1646, id=114,
length=203
Acct-Session-Id = "00000119" Tunnel-Server-Endpoint:0 = "172.21.250.34" Tunnel-Client-Endpoint:0 = "172.21.129.6" Tunnel-Assignment-Id:0 = "session-id" Tunnel-Type:0 = L2TP Acct-Tunnel-Connection = "265" Tunnel-Client-Auth-Id:0 = "LAC" Tunnel-Server-Auth-Id:0 = "session-id" Framed-Protocol = PPP Acct-Authentic = Local Acct-Status-Type = Start User-Name = "qwerty123\000isdn.xxx.com" Acct-Multi-Session-Id = "000000BA" Acct-Link-Count = 2 Framed-IP-Address = 203.x.x.x NAS-Port = 2 NAS-Port-Type = Virtual Service-Type = Framed-User NAS-IP-Address = 203.x.x.x Acct-Delay-Time = 30 From above. Username field is encrypted
from "@" into "\000" then Authentication fail!.
What should I do? Please help
me.
Best
regards,
================================ Thassanai Mhuansean System Engineer Wireless GMM GRAMMY PCL. Mobile: 661 4850300 Tel: 662 4850300p2 E-mail: [EMAIL PROTECTED] |
- Re: Please Help me about Freeradius! Thassanai Mhuansean
- Re: Please Help me about Freeradius! Robert Canary