I have no information of the NAS, I have no control over that and I have to assume that they have done the right configs.
User entry: [EMAIL PROTECTED] password="zx1J0sd" Service-Type = Framed, Framed-Protocol = PPP, Framed-IP-Address = "x.y.z.v", Framed-IP-Netmask = "255.255.255.255", Framed-Route = None, Framed-MTU = 1500, Framed-Compression = Van-Jacobson-TCP-IP -----Original Message----- From: Oliver Graf [mailto:[EMAIL PROTECTED] Sent: 07 August 2003 17:11 To: '[EMAIL PROTECTED]' Subject: Re: No PPP connection On Thu, Aug 07, 2003 at 06:08:16PM +0200, Oliver Graf wrote: > On Thu, Aug 07, 2003 at 04:42:45PM +0100, Brian Foster wrote: > > I'm receiving authentication request from another radius server, realms. > > Authentication is fine and PPP is OK, I've setup static IP addresses for > > some users but this information is being returned to the user. Any ideas?. > > Auth is fine, ppp works, static ip is returned to the user... > > So where is the problem here? Hint: if the ip is not returned and you just missed a word, would you like to share the user entry and the type of NAS you're using with us? Oliver. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html ********************************************************************** This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This footnote also confirms that this email message has been swept by MIMEsweeper for the presence of computer viruses. www.newtelsolutions.com ********************************************************************** - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html