I would like some help configuring my Freeradius.
I just started with Freeradius and i am not that familiar with wireless/certificates so i thougt to start with EAP/MD5 isof EAP/TLS.
your EAP/MD5 is working but check www.freeradius.org/doc/EAP-MD5.html
At this moment it looks like i can authenticate with my WinXP wireless client with Radius.
not on wireless if your WinXP is SP1 (or later)...
After this first step, i believe WEP keys need to be negotiated, but i think i have that part missing/wrong.
no, no WEP keys are EVER negotiated in EAP/MD5. sorry, you have to set those manually - the same in the AP and the STA.
My AP is configurable for 64 / 128 / 256 keys incombination with Radius.
Also no ip adress is provided, wich normally is dhcp. I guess this only starts after WEP is enabled correctly.
that's correct. and it doesn't work if something is wrong. 256 bit keys are not standard. your card should be from the same vendor then.
I tried several options from the documentation / newsgroup but i could not find a satisfactory answer. Most use use EAP/TLS.
because of dynamic WEP keys which are possible with EAP/TLS
Log from Dlink950+ : Sep 10 08:52:23 accesspoint Wireless PC connected 00-06-25-A8-1A-41^M Sep 10 08:52:23 accesspoint EAP-Request/Identity ^M Sep 10 08:52:27 accesspoint EAP-Request/Identity ^M Sep 10 08:52:28 accesspoint EAP-Response/Identity test^M Sep 10 08:52:28 accesspoint EAP-Success 00-06-25-A8-1A-41^M Sep 10 08:52:28 accesspoint Authentication success 00-06-25-A8-1A-41^M
your EAP/MD5 is working.
Sending Access-Accept of id 6 to 192.168.1.50:1208 Service-Type = Framed-User Framed-IP-Address = 192.168.1.60 EAP-Message = 0x03020004 Message-Authenticator = 0x00000000000000000000000000000000 Finished request 1
idem.
-> set the WEP keys
ciao artur
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html